Question about 1990 Lexus ES 250

1 Answer

Fuel injector I put 3 new fuel injector and the other 3 was used, it cause any damage on my car?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Lexus Master
  • 75,822 Answers

No it should be ok but yopu may have a rough idle or other problems.

Posted on Apr 23, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is the engine emmitting black smoke when driving


black smoke is excessive fuel in the air fuel ratio
causes leaking gaskets under injectors, problem HO2S sensor , blocked air inlet /filter, excessive fuel pressure
possible cause --mechanic did not use new gaskets under injectors that were damaged form the overheating

Jul 29, 2016 | Cars & Trucks

1 Answer

Gas is getting in my oil in a 350z Nissan. what should I check or could it be my computer telling injectors more gas]


You may have a faulty injector that fails to shut off and is constantly supplying fuel. During operation it may not be noticeable, but when you shut the car off, the injector will pour fuel into the empty cylinder until fuel pressure falls off. This fuel will leak down along the piston rings into the oil, contaminating it. This will eventually cause cylinder wall damage due to "washing", the fuel is removing the protective oil film on the cylinder wall. This will cause much more wear on each start-up. Have the injectors tested.

Feb 18, 2015 | 2003 Nissan 350Z

1 Answer

Gas tank vandalism


yes it could damage the fuel injectors just drop the fuel tank and clean it out or replace it with a new fuel tank which is $100-$200 at autozone or checker auto.

Jun 25, 2014 | 1998 Chevrolet K1500

1 Answer

How do ya fix codes p0320&p0340


Ford Crown Victoria, Mercury Grand Marquis, Marauder, Lincoln Town Car 1999-2005
4.6L V8 - Auto 2

Print


Trouble Code: P0201

Cylinder 1 Injector Circuit Malfunction

Possible Causes:


Injector 1 connector is damaged, open or shortedInjector 1 control circuit is open, shorted to ground or to powerPCM has failed (the injector driver circuit may be damaged)


Trouble Code: P0202

Cylinder 2 Injector Circuit Malfunction

Possible Causes:


Injector 2 connector is damaged, open or shortedInjector 2 control circuit is open, shorted to ground or to powerPCM has failed (the injector driver circuit may be damaged)


Trouble Code: P0203

Cylinder 3 Injector Circuit Malfunction

Possible Causes:


Injector 3 connector is damaged, open or shortedInjector 3 control circuit is open, shorted to ground or to powerPCM has failed (the injector driver circuit may be damaged)


Trouble Code: P0204

Cylinder 4 Injector Circuit Malfunction

Possible Causes:


Injector 4 connector is damaged, open or shortedInjector 4 control circuit is open, shorted to ground or to powerPCM has failed (the injector driver circuit may be damaged)


Trouble Code: P0205

Cylinder 5 Injector Circuit Malfunction

Possible Causes:


Injector 5 connector is damaged, open or shortedInjector 5 control circuit is open, shorted to ground or to powerPCM has failed (the injector driver circuit may be damaged)


Trouble Code: P0206

Cylinder 6 Injector Circuit Malfunction

Possible Causes:


Injector 6 connector is damaged, open or shortedInjector 6 control circuit is open, shorted to ground or to powerPCM has failed (the injector driver circuit may be damaged)


Trouble Code: P0207

Cylinder 7 Injector Circuit Malfunction

Possible Causes:


Injector 7 connector is damaged, open or shortedInjector 7 control circuit is open, shorted to ground or to powerPCM has failed (the injector driver circuit may be damaged)


Trouble Code: P0208

Cylinder 8 Injector Circuit Malfunction

Possible Causes:


Injector 8 connector is damaged, open or shortedInjector 8 control circuit is open, shorted to ground or to powerPCM has failed (the injector driver circuit may be damaged)


Trouble Code: P0219

Engine Over-Speed Condition

Possible Causes:


Engine operated in the wrong transmission gear positionExcessive engine speed with gear selector in Neutral positionWheel slippage due to wet, muddy or snowing conditions


Trouble Code: P0230

Fuel Pump Primary Circuit Malfunction

Possible Causes:


FP or FSV circuit is open or shortedFuel pump relay VPWR circuit openFuel pump relay is damaged or has failedPCM has failed


Trouble Code: P0231

Fuel Pump Primary Circuit Low Input

Possible Causes:


FP or FSV circuit is open or shorted to groundFuel pump relay VPWR circuit open or fuel pump relay failedPCM has failed


Trouble Code: P0232

Fuel Pump Secondary Circuit High Input

Possible Causes:


Fuel pump relay contacts always closedFuel pump ground circuit has high resistanceFuel pump secondary circuit is shorted to powerLow speed fuel pump relay damaged or related circuit problem


Trouble Code: P0297

Vehicle Over-Speed Condition

Possible Causes:


The code indicates the vehicle was driven at very high engine speed (rpm) for too long. The PCM temporarily prohibits high engine speed by disabling the fuel injectors with this code set.


Trouble Code: P0300

Random Misfire Detected

Possible Causes:


Base engine mechanical fault that affects two or more cylindersFuel metering fault that affects two or more cylindersFuel pressure too low or too high, fuel supply contaminatedEVAP system problem or the EVAP canister is fuel saturatedEGR valve is stuck open or the PCV system has a vacuum leakIgnition system fault (coil, plug) affecting two or more cylindersMAF sensor contamination (it can cause a very lean condition)Vehicle driven while very low on fuel (less than 1/8 of a tank)TSB 03-14-4 contains repair help for this code for COP ignition


Trouble Code: P0301

Cylinder Number 1 Misfire Detected

Possible Causes:


Air leak in the intake manifold, or in the EGR or PCM systemBase engine mechanical problem that affects only Cylinder 1Fuel delivery component problem that affects only Cylinder 1 (i.e., a contaminated, dirty or sticking fuel injector)Ignition system problem (coil, plug) that affects only Cylinder 1TSB 02-16-2 contains repair help for this code (LS & T-Bird)TSB 03-14-4 contains repair help for this code for COP ignition


Trouble Code: P0302

Cylinder Number 2 Misfire Detected

Possible Causes:


Air leak in the intake manifold, or in the EGR or PCM systemBase engine mechanical problem that affects only Cylinder 2Fuel delivery component problem that affects only Cylinder 2 (i.e., a contaminated, dirty or sticking fuel injector)Ignition system problem (coil, plug) that affects only Cylinder 2TSB 02-16-2 contains repair help for this code (LS & T-Bird)TSB 03-14-4 contains repair help for this code for COP ignition


Trouble Code: P0303

Cylinder Number 3 Misfire Detected

Possible Causes:


Air leak in the intake manifold, or in the EGR or PCM systemBase engine mechanical problem that affects only Cylinder 3Fuel delivery component problem that affects only Cylinder 3 (i.e., a contaminated, dirty or sticking fuel injector)Ignition system problem (coil, plug) that affects only Cylinder 3TSB 02-16-2 contains repair help for this code (LS & T-Bird)TSB 03-14-4 contains repair help for this code for COP ignition


Trouble Code: P0304

Cylinder Number 4 Misfire Detected

Possible Causes:


Air leak in the intake manifold, or in the EGR or PCM systemBase engine mechanical problem that affects only Cylinder 4Fuel delivery component problem that affects only Cylinder 4 (i.e., a contaminated, dirty or sticking fuel injector)Ignition system problem (coil, plug) that affects only Cylinder 4TSB 02-16-2 contains repair help for this code (LS & T-Bird)TSB 03-14-4 contains repair help for this code for COP ignition


Trouble Code: P0305

Cylinder Number 5 Misfire Detected

Possible Causes:


Air leak in the intake manifold, or in the EGR or PCM systemBase engine mechanical problem that affects only Cylinder 5Fuel delivery component problem that affects only Cylinder 5 (i.e., a contaminated, dirty or sticking fuel injector)Ignition system problem (coil, plug) that affects only Cylinder 5TSB 02-16-2 contains repair help for this code (LS & T-Bird)TSB 03-14-4 contains repair help for this code for COP ignition


Trouble Code: P0306

Cylinder Number 6 Misfire Detected

Possible Causes:


Air leak in the intake manifold, or in the EGR or PCM systemBase engine mechanical problem that affects only Cylinder 6Fuel delivery component problem that affects only Cylinder 6 (i.e., a contaminated, dirty or sticking fuel injector)Ignition system problem (coil, plug) that affects only Cylinder 6TSB 02-16-2 contains repair help for this code (LS & T-Bird)TSB 03-14-4 contains repair help for this code for COP ignition


Trouble Code: P0307

Cylinder Number 7 Misfire Detected

Possible Causes:


Air leak in the intake manifold, or in the EGR or PCM systemBase engine mechanical problem that affects only Cylinder 7Fuel delivery component problem that affects only Cylinder 7 (i.e., a contaminated, dirty or sticking fuel injector)Ignition system problem (coil, plug) that affects only Cylinder 7TSB 02-16-2 contains repair help for this code (LS & T-Bird)TSB 03-14-4 contains repair help for this code for COP ignition


Trouble Code: P0308

Cylinder Number 8 Misfire Detected

Possible Causes:


Air leak in the intake manifold, or in the EGR or PCM systemBase engine mechanical problem that affects only Cylinder 8Fuel delivery component problem that affects only Cylinder 8 (i.e., a contaminated, dirty or sticking fuel injector)Ignition system problem (coil, plug) that affects only Cylinder 8TSB 02-16-2 contains repair help for this code (LS & T-Bird)TSB 03-14-4 contains repair help for this code for COP ignition


Trouble Code: P0315

Unable to Learn Crankshaft Variation

Possible Causes:


Inspect the CKP sensor for damageInspect the CKP sensor for debris on the rotorInspect the crankshaft pulse wheel for damaged teethInspect the crankshaft pulse wheel for wobble (loose condition)


Trouble Code: P0316

Misfire in the First 1000 Revolutions

Possible Causes:


Check for CMC DTC P0136, P0156, P0171, P0172, P0175, P1130 and P1150. Repair these adaptive fuel and HO2S codesCheck for any other CMC in memory. Repair these codes first!Ignore P1000 codes that set during KOEO and KOER Self-Test


Trouble Code: P0320

Ignition Engine Speed Input Circuit Malfunction

Possible Causes:


Inspect for problems with an Aftermarket 2-way radioInspect for signs of "arcing" at one or more of the ignition coilsInspect the Profile Ignition Pickup (PIP) unit inside distributor (check for damage or corrosion at the PIP sensor connector)PIP sensor is damaged or it has failed (distributor models)Ignition control module (ICM) has failed (Distributorless models)Trouble Code: P0340

Camshaft Position Sensor Circuit Malfunction

Possible Causes:


CMP sensor circuit is open or shorted to groundCMP sensor circuit is shorted to powerCMP sensor ground (return) circuit is openCMP sensor installation incorrect (Hall-effect type)CMP sensor is damaged or CMP sensor shielding damagedPCM has failedTSB 02-22-1 contains repair information for this trouble code

Nov 16, 2012 | Ford Cars & Trucks

1 Answer

After putting gas in my car, why did it start shaking really bad and idling real high?


After a fill up, the fumes in the gas tank are very concentrated. If problem with evap system, it could cause problems after a fill-up. Just a thought.

Mar 10, 2017 | Cars & Trucks

1 Answer

Changed all spark plugs 2 coils still getting po316 and po305 what could be causing this f150 4.6 liter problem started after putting in a new fuel pump


Diagnostic Test Code (DTC) P0316 means that a cylinder misfire was detected within the first 1000 revolutions of the engine crankshaft after engine startup. This code will always be stored at the same time with freeze frame data and a fault code for the offending cylinder.
This is where DTC P0305 comes in.
This code means that cylinder #5 is the cylinder that is causing the misfire.
Coils and plugs are only two of the many possible reasons for a cylinder misfire.
The possible reasons for both of these codes are:
> Damaged crankshaft position sensor
> Ignition system (Primary or Secondary)
> Faulty fuel injector or fuel injector control circuit
> Poor fuel quality (will usually cause MULTIPLE cylinder misfire codes)
> Base engine faults (burned valves, low compression, damaged lifters or cam, blown head gasket, etc.)
> Damaged/malfunctioning PCM

NOTE: The LEAST LIKELY cause is the PCM. A damaged Crankshaft Position Sensor will usually cause problems on ALL cylinders, not a single cylinder, however it IS possible if the sensing ring is damaged.

Aug 09, 2011 | 2003 Lincoln LS

1 Answer

1996 4.3 vortec S10. Cranks wont start when engine/ outside temp is cold. Have used starting fluid,will start and run rest of day. Fuel pmp is cycling relay is working,needed a tune up I replaced all...


The plenum shouldn't be damp with gas. Is it a throttle body fuel injection system?

Could be a leaky injector.

Fuel Meter Body & Fuel Injectors (4.3L Engine) Removal & Installation 1995-2002 Models (RPO L35) To Remove:
4.3L (RPO L35) Fuel meter body assembly gm_trk_sil15_02-04_43_fuel_metr_body_assy.gif

  1. Before servicing the vehicle, refer to the Cautions and Warnings in the beginning of this section
  2. Remove or disconnect the following:
    • Upper intake manifold (See: Upper Intake Manifold)
    • Fuel meter body
    • Injector retainer lock nuts (J) and retainer (K)
    NOTE: Use care in removing the fuel injectors to prevent damage to the electrical connector terminals. The fuel injector is serviced as a complete assembly only. Also since the injectors are electrical compartments, these injectors should not be immersed in any type of liquid solvent or cleaner as damage may occur. Fuel injector cleaning is not recommended.
  3. While pulling the poppet nozzle tube downward, push with a small tip punch down between the injector terminals until the injector is removed
To Install:
4.3L (RPO L35) Fuel meter body assembly gm_trk_sil15_02-04_43_fuel_metr_body_assy.gif

Note: When ordering new fuel injectors, be sure to order the correct injector for the application being serviced.
  1. Lubricate the new injector O-ring seals with clean engine oil.
  2. Install or connect the following:
    • Fuel injector (L) into the fuel meter body injector socket
    • Retainer (K) and injector retainer lock nuts (J) and tighten the nuts
      1. Torque to: 27 inch lbs. (3 Nm)
    • Fuel meter body
    • Upper intake manifold (See: Upper Intake Manifold)
  3. Test drive the vehicle to confirm the repairs.
1993-2005 Models (RPO LU3) To Remove:
4.3L (RPO LU3) Fuel meter body assembly gm_trk_sil15_02-04_43_rpolu3_fuel_metr_body_assy.gif

  1. Before servicing the vehicle, refer to the Cautions and Warnings in the beginning of this section.
  2. Remove or disconnect the following:
    • Upper intake manifold (See: Upper Intake Manifold)
    • Fuel meter body
    • Injector retainer lock nuts (J) and retainer (K)
    NOTE: Use care in removing the fuel injectors to prevent damage to the electrical connector terminals. The fuel injector is serviced as a complete assembly only. Also since the injectors are electrical compartments, these injectors should not be immersed in any type of liquid solvent or cleaner as damage may occur. Fuel injector cleaning is not recommended.
  3. While pulling the fuel injector downward, push with a small tip punch down between the injector terminals until the injector is removed
To Install:
Note: When ordering new fuel injectors, be sure to order the correct injector for the application being serviced.
  1. Lubricate the NEW injector O-ring seals with clean engine oil
  2. Install or connect the following:
    • Fuel injector (L) into the fuel meter body injector socket
    • Retainer (K) and the injector retainer lock nuts (J) and tighten the nuts
      1. Torque to: 27 inch lbs. (3 Nm)
    • Fuel meter body
    • Upper intake manifold (See: Upper Intake Manifold)
  3. Test drive the vehicle to confirm the repairs

Jan 29, 2011 | 1996 Chevrolet S-10 Pickup

1 Answer

The rubber o-rings fell out of the fuel line, and I need to know what order they are supposed to be in so I can put them back correctly.


emove the six reverse torx bolts from the fuel rail using an E7 star socket. You may notice that the paper fuel rail gasket is starting to or maybe already has broken between the intake ports. This will cause a lean code condition. (P0171 and P0174)
2. Gently pry the fuel rail off of the lower intake and the six injectors. Note the orientation of the injectors beforehand.
3. Remove all six injectors and discard all 12 o-rings.
4. Thoroughly clean all gasket surfaces and o-ring surfaces.
5. Clean the o-ring areas on all the injectors.
6. Put new o-rings on the injectors. A light film of motor oil on the o-rings will help in seating the injectors.
7. Put the injectors into the lower intake.
8. Put new paper gasket between the fuel rail and lower intake and make sure all of the injectors are seated into the fuel rail.
9. Put the six reverse torx bolts back in and torque them down in this sequence:
<Firewall 1 3 5
............ 6 4 2
To 12-16 N*m (9-11 lb*ft)

reassembly is the reverse of the dissassembly. after you get this done, get you a cold one. heck get two. you deserve it.

(you can let the children and small animals back in the area now)

Dec 06, 2010 | 1993 Ford Explorer Limited

1 Answer

How do you remove the fuel injector on a ford 6.0 liter diesel engine?


V8 6.0L DSl Turbo VNP 1. Remove the valve cover 2 disconnect the fuel injector electrical connector 3 remove the bolts and the high-pressure oil rail 4 Caution, Do not attempt to apply battery voltage to the injector or damage to the fuel injector will occur. using a 19mm (.074 in) socket, push the fuel injector electrical connector out of the rocker arm carrier. 5 Note - there is no need to drain the fuel rail - if the engine coolant is found in the chambers,it may be necessary to install a new injector sleeve. Remove the bolt, fuel injector hold-down clamp and fuel injector.

May 04, 2010 | 2004 Ford F350

2 Answers

After removing the fuel injectors and rail to remove the manifold, how do you reinstall the fuel injectors?


the same way you took it apart. put a little grease around the rubber seals so they will slide in easier. just tap on the fuel rail while lightly tapping it into place.

Mar 28, 2010 | 2002 Honda Passport

Not finding what you are looking for?
1990 Lexus ES 250 Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

881 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...