Question about 1994 Chrysler LeBaron

2 Answers

Does chrysler lebaron have resevoir for the convertable top

Top not working good with new pump does it have a fluid tank some where

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 149 Answers

There is a rubber plug on the front of the pump, you will need a small hand pump to fill the reservoir with dexron atf

Posted on Apr 21, 2013

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 235 Answers

Inside the pump/? did the installer put fluid into the pump wen he installed it?

Posted on Apr 21, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 40 Answers

SOURCE: 95 chrysler lebaron gtc 3.0 starts for a second and then stalls out

What is the fuel pressure reading at the fuel rail?

Posted on Mar 19, 2009

emissionwiz
  • 76118 Answers

SOURCE: Need to change fuel pump on 1994 chrysler lebaron 3.0 v-6

yes u need to drop the tank out. there is no underseat access.

Posted on Apr 11, 2009

  • 1 Answer

SOURCE: 1995 chrysler lebaron

Here's what mine says- for a 95 Chysler LeBaron GTC Convertible. I didn't see anything about a fuel pump, but maybe it's connected to something else? I dunno. Good luck. Here's the info at least.
1 HTR-AC 30A, 2 POWER WINDOWS 30A C/B, 3 PWR SEAT, LKS, TOP 30 A C/B, 4-BLANK, 5 BACK-UP LAMPS 20A, 6 TURN SIGNAL 20A, 7 REAR WIPER 20A, 8 ILLUM LAMPS 5A, 9 INTERIOR LAMPS 10A, 11 CIGAR LIGHTER 20A, 12 RS AMO 20A, 13 INTERIOR LAMPS 10A. 14 BOD COMP MESS CTR 5A, 15 SPEED CONTROL 2A, 16 GAUGES AIRBAGS 5A, 17 STOP LAMPS 18 HEAD LAMP RT-LOW 10A, 19 HEATED MIRRORS 5A, 20 AIRBAGS 5A, 21 STOP LAMOS 20A, 22 HORN 20A, 23 RT-TAIL LAMP-EUR 5A, 24 LT-TAIL LAMP EUR 5A, 25 HEAD LAMP LT-HI 10A, 26 HEAD LAMP RT-HI 10A, 27 RADIO 104, 28 FRONT WIPER 20A

Posted on Apr 12, 2009

  • 50 Answers

SOURCE: 2000 chrysler sebring convertable top will go down but will not

Typically, when when this happens, the system is low on fluid and/or must be bled. Here are the procedures:
Lower the top to the full down position.

  1. Remove the rear seat cushion, seat back and inner quarter trim panels. Pull up sharply on the seat cushion at the front about midway between the middle of the seat and the outside edges. The seat back is held in by nuts. The quarter trim panels are held in by screws I think.
  2. Remove the cylinder mounting brackets and remove the cylinders from the trunnion pivot mounts.
  3. Rotate the cylinders 180 degrees (the hose fittings will now face to front of the vehicle.
  4. Disconnect the motor/pump retaining clips from the body.
  5. Rotate and raise the motor/pump assembly so the reservoir is in the up position. The rubber filler plug will be at the top.
  6. Raise motor/pump fitting to at least 2 inches above the horizontal rear seat back reinforcement.
  7. Tilt the motor/pump assembly to approximately the 10 o'clock position, with the rubber filler plug still at the top CAUTION: THE MOTOR/PUMP ASSEMBLY MUST REMAIN IN THE CURRENT POSITION UNTIL THE RUBBER FILLER PLUG IS REINSTALLED IN THE Step 12.
  8. Remove the rubber fill plug from reservoir.
  9. Fill the hydraulic system by adding Dexron 2 Automatic Transmission Fluid to the bottom of the fill hole CAUTION: DO NOT OPERATE THE TOP SWITCH IN THE UP (CLOSING THE TOP) DIRECTION.
  10. With two people, activate the top switch in the down (opening the top) position to fully retract the cylinder rods and hold for approximately 5 seconds, until the motor/pump stalls. A percolating or gurgle sound/feeling is an indication that the procedure is working.
  11. Top off the motor/pump with Dexron 2 and insert the filler plug.
  12. Install the motor/pump assembly into the vehicle mounting bracket.
  13. Rotate the cylinders back to the original position (hose fitting rearward)
  14. Install the motor/pump lead and hydraulic line clips (the hydraulic line clips are to assist in the production process) to ensure that the seat back/seat cushion do not pinch the lines. If the sticky side is no longer holding to the floor pan, the clips can be left off.
  15. Ensure that the bushing is still on the trunnion pivot mount and bracket. Tap the top switch in (raising the top) to get the cylinder trunnion onto the trunnion pivot mounts, if needed.
  16. Install cylinder mounting brackets.
  17. Raise and lower the top to ensure proper operation.
  18. Install the inner quarter panels, and the rear seat back and cushion.
  19. And Just a fair warning here - you WILL spill fluid inside your car. If you manage not to, I want to know how. I cover everything with garbage bags because there have been a few instances where I accidentally hit the button the wrong way and that stuff went EVERYWHERE. Be careful and good luck.

Posted on Apr 17, 2009

  • 93 Answers

SOURCE: Can I manually raise my Convertible top on my 1994 Chrysler Lebar

You can, but it will probably take two people and they must move the top slowly and together. It will be hard because you will be forcing the fluid back through the pump.

You can change it to a manual top by removing the bolt at the top of the cylinders and lowering the both shafts down into the cylinders.

Karl at topgunwon.com

Posted on Jan 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i change a fuel pump


Disconnect the battery, drain the tank with siphon hose, Drop the tank it has a submersible pump. Remove the jar top and pull out the pump and replace. Reverse steps to install.

May 16, 2014 | 1991 Chrysler LeBaron

1 Answer

Intermitent starting


On some models you can remove the pump from the side of the gas tank. On the others, you have to drop the tank to get the pump out of the top.

Jun 21, 2013 | 1986 Chrysler LeBaron

1 Answer

I need to determine if a gas tank off of a Spirit will interchange with the tank from a 1990 Chrysler Lebarron convertible


The Lebaron, depending on which model has either a 14 or 16 gallon tank. A 1990 Spirit gas tank has only a 16 gallon tank. If your Lebaron has a 16 gallon tank it is exactly the same part.

Mar 18, 2010 | 1990 Chrysler LeBaron

1 Answer

My 1991 chrysler lebaron convertible with 119,000 miles bucks and pulls while driving and stalls out if i don't give it more gas. rough ride. replaced fuel pump and sensor. seems worse now...could it be...


I went through the sme thing. I replaced every sensor on the motor. It turned out to be a very dirty gas tank. I replaced it. And it runs like a top now.

Mar 06, 2010 | Chrysler LeBaron Cars & Trucks

2 Answers

Convertible top quit operating.


your motor went out , just go to a junkyard and see if they have your car and just rip the motor out of it and put it in yours

Jul 05, 2009 | 1990 Chrysler LeBaron

1 Answer

We added fluid to the pump on my 1990 lebaron


If you hear clicking, the fuse is good.
You probably need a solenoid which is located behind the rear seat near the motor.

Karl at topgunwon.com

Jun 29, 2009 | 1994 Chrysler LeBaron

2 Answers

Can I manually raise my Convertible top on my 1994 Chrysler Lebaron gtc


You can, but it will probably take two people and they must move the top slowly and together. It will be hard because you will be forcing the fluid back through the pump.

You can change it to a manual top by removing the bolt at the top of the cylinders and lowering the both shafts down into the cylinders.

Karl at topgunwon.com

Jun 06, 2009 | 1994 Chrysler LeBaron

1 Answer

Were is the fuel pump relate


In my 1985 Lebaron convertible 2.2 turbo the fuel pump is located in the fuel tank in the back next to the fuel sending unit.

Apr 28, 2009 | 1985 Chrysler LeBaron

1 Answer

Covertible top


low fluid in the tops hydraulic pump reservoir from a leak.

Apr 09, 2009 | 1992 Chrysler Lebaron

Not finding what you are looking for?
1994 Chrysler LeBaron Logo

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...