I need to know where the camshaft positioning sensor is located on a 2005 kia Sedona
I hope this diagram is helpful.
It's under the intake manifold on the passenger side
SOURCE: 2005 kia sedona ECU replacement
It's located at the passenger side behind the air conditioner plastic duct (inner firewall)
SOURCE: where is the crank position sensor located in 2005
Hello martinezmelm: My name is Roger and I can answer your question. To locate the crankshaft position sensor. You will need to remove the timing cover. You will find the sensor on top of the crankshaft gear. Between the V of the timing belt.
Should you need further help please just ask. Please rate the answer as this way I know it was helpful. Thank You for using Fix Ya. Roger
SOURCE: Where is the input speed sensor on KIA sedona 2005
on transmission has 2 wires at right side of trans .by axel
SOURCE: Crankshaft position sensor replacement on 2005 Kia Sedona
The CPS is located under the timming cover 4 small bolts remove the cover and the sensor is viewable 2 bolts have to be loosend and the wire leads up to a dual connector on the left side of the engine
727 views
Usually answered in minutes!
×