Question about 2004 Ford Taurus

Open Question

2004 FORD TAURUS DOHC HESITATION WHILE DRIVING

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 140 Answers

SOURCE: what is the spark plug gap for a 2004 ford taurus

Hello, go to www.autozone.com and put your car in the "manage my vehicles" tab and then click on the "Repair info" tab and click on the links to get just about any info you need. If you need help just ask. Good luck.

Posted on Jan 23, 2009

  • 105 Answers

SOURCE: 2004 ford taurus hesitates when I hit the gas?

this is happening because of your fuel pressure which is slowing down when you open the throttle to the intake manifold. you are losing fuel pressure somewhere from the gas tank and the fuel rail. do a fuel pressure check test. that might do the trick.

Posted on Jul 26, 2009

  • 21 Answers

SOURCE: 1998 ford Taurus 24v DOHC Overheating not thermostat

check to see if eans coming on if they dont then its fan relay if they are the rad is pluged or ther is an air pocket in the cooling system there should be a bleeder on it

Posted on Oct 06, 2009

  • 14036 Answers

SOURCE: need a fuse box diagram for a 2004 ford taurus

GO TO AUTO ZONE OR ADVANCE AUTO PART BUY A HAYNES REPAIR MANUAL FOR YOUR CAR.IT HAS ALL THE ELECTRICAL DIAGRAMS.

Posted on Mar 05, 2010

wfservices
  • 260 Answers

SOURCE: alternator removal 1998 ford taurus dohc

3.0L (4V)
Removal

  1. Disconnect the battery ground cable.
  1. Remove the accessory drive belt from the generator pulley.
  1. Remove the power steering line bracket and heater hose support bracket from the generator.
  1. Remove the upper generator bolts.
  1. Partially raise the vehicle on a hoist.
  1. Remove the right front wheel.
  1. Remove the lower fender splash shield retainers and position the shield out of the way.
  1. Remove the generator splash shield.
  1. Raise the vehicle.
  1. Disconnect the electrical connector and remove the battery positive cable from the generator.
  1. Position an adjustable stand to the subframe.
  1. Remove the right subframe bolts.
  1. Remove the lower generator bolt.
  1. Lower the subframe to provide clearance.
  1. Remove the generator.
Installation
  1. NOTE: Do not tighten the lower bolt.

    Install the generator and the lower bolt.
  1. Raise the subframe and install the subframe bolts. Tighten the bolts to 90 Nm (66 lb-ft).
  1. Remove the adjustable stand.
  1. Lower the vehicle.
  1. Install the upper generator bolts and tighten them to 25 Nm (18 lb-ft).
  1. Install the power steering line bracket and the heater hose support bracket. Tighten the nut to 20 Nm (15 lb-ft).
  1. Install the accessory drive belt. Refer to Partially raise the vehicle.
  1. Tighten the lower generator bolt to 25 Nm (18 lb-ft).
  1. Connect the generator electrical connector.
  1. Install the battery positive B+ cable and nut. Tighten the cable nut to 10 Nm (89 lb-in).
  1. Install the generator splash shield.
  1. Install the fender splash shield and the retainers.
  1. Install the right front wheel.
  1. Lower the vehicle.
  1. Connect the negative battery cable.

Posted on Mar 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

175a fuse? 2004 Taurus 3.0 dohc. check charging system and battery light on. both battery and alternator replaced.


Have you tried resetting the code yourself with a scanner? Have you measured the voltage output from the alternator while idling?

Dec 04, 2016 | 2004 Ford Taurus

1 Answer

How to replace air condenser on a 2004 Ford Taurus ses dohc


The condenser unfortunately must be replaced from under the car, so the job is best left to a shop with a car lift.

Aug 27, 2016 | 2004 Ford Taurus

1 Answer

How to remove the water pump drive belt on a 1999 ford taurus dohc 6cyl


here is a video for the sohc motor is it about the same way

Jan 27, 2013 | 1999 Ford Taurus

2 Answers

Can't get the starter out of a ford Taurus 2004


either you took out the wrong bolt by the trans.... or the pin is stuck ... give it a whack with a mallet
should of taken out 2 ,13 mm bolts

Jul 28, 2011 | 2008 Ford Taurus X

1 Answer

Fire order for 97 ford taurus


1997 Ford Taurus 3.4 liter DOHC V-8 VIN "N"

42f4549.gif


1997 Ford Taurus 3.0 liter V-6 VIN "2"
and
1997 Ford Taurus 3.0 liter V-6 VIN "U"
and
1997 Ford Taurus 3.0 liter V-6 DOHC VIN "S"

05cacda.gif


Hope helps (remember rated this).

Jun 02, 2010 | 1997 Ford Taurus

1 Answer

ECU compatibility


You can try to replace with a similar unit, but typically Ford ECUs have to be "reflashed" by the dealer. Ford has numerous calibration codes and various other vehicle specific information that can only be managed with Ford certified (dealer) programing devices. I hope this helps

Nov 14, 2008 | 2004 Ford Taurus

Not finding what you are looking for?
2004 Ford Taurus Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...