Question about 2000 Honda Accord

1 Answer

Clothes washer tub spins on wash

The tub spins so fast on the WASH cycle that the clothes centrifuged away from the agitator making it useless. A burning rubber smell lead me to change the belt but that did not fix the problem. I figure the problem with the tub is the same that melted the belt. Any tips? Yes, the agitator works and the spin cycle works just fine.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Sounds like u have a problem with the "brain". The agitator and spin cycle should never run at the same time. therefore it leads me to A: brain issue B:problem in the actual transmission of what cycle should be running. You will continue to smell the burning rubber due to the issue being one of the two explained above. Does it ever NOT spin? If this is the case the likely hood is that it will be a solenoid.

Posted on Feb 24, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No power to my lg washer


Hi. We have LGWT1101CW top loader. Like the person previously, the cycle won't spin and drain the water out. I contacted an LG rep and spent 1 hour to find out that we needed to replace the pump motor so my husband installed a brand new one. Cleared out all hoses too. We ran a test cycle, still does the same thing. It starts the spin cycle and appears to trip out after making a "clunk" and then stops with the water still in the tub.

Aug 22, 2017 | Cars & Trucks

1 Answer

I have LG WF-T7050TP, machine doesn't wash clothes. drum inside does not spin during washing timer. please help or what could be the problem?


Does the machine fill with water , does the drum turn , and does the machine pump out the water before it starts to spin

Jun 30, 2017 | Cars & Trucks

1 Answer

Kenmore washer won't fast spin


On most modern Washing Machines there will be an engineers program. To get into it there will be a key or button press combination.
You should be able to reset and control functions from there.

Google your Model with Engineer Program etc.

We have a list of many Service Manuals at: www.spotless-service.com (More added everyday)

Aug 29, 2012 | Cars & Trucks

1 Answer

GEprofile washing machine makes noise spinning,washes good


Well I'm not sure what it has to do with a 1997 Grand Prix but, you have a bad spin bearing on the bottom of the washer transmission. The bottom tub seals tend to leak and water runs into the bearing.

Jun 12, 2010 | 1997 Pontiac Grand Prix

2 Answers

My washer won't spin the clothes dry


your pump in your washer is malfunctioning. no matter how much it spins if the pump doesn't work it can't remove the water. it will just flow back into the tub once it stops spinning.

Dec 18, 2009 | Cars & Trucks

1 Answer

Spins during wash and rinse cyle, but not enough for the water to spin out


is it overloaded take out a third of the clothes ad redew the spin cycle see if this works

Nov 29, 2009 | Cars & Trucks

1 Answer

My washing machine is smelly!! I was told that I


You don't neeed to remove anything Just set it to large load hot water and add 2 cups of bleach. Run it through 2 cycles. If the smell is still not gone completely repeat.
Never had this fail.
Hope this helps
Please leave feedback

Nov 29, 2009 | Cars & Trucks

1 Answer

Our washer does not spin. It vibrates, but when you open the lid, it is clear that nothing has moved.


Does the washer adjitate well during the wash cycle. If the washer fills and pumps oput the water but does not adjitate or spin well the coupler that couples the motor to the transmission is stripped and worn our.

Nov 28, 2009 | Cars & Trucks

1 Answer

My washing machine wont wash. It will fill with water and drain in spin cycle. Someone help me! Could it be the belt?


It sounds like your "Agitator" or "spinner" is not working. It is hard to say without more details.

Here's a tip anyways:

Get a small socket set, and pull out your washer. Either on the back or the front of the machine (usually the back), there will be 6 to 12 small nuts and bolts that can be removed to pull the cover from the washer.

Once you have the cover off, run the machine and watch it. You will notice where the problem is if you keep your eyes open for it. Try setting it to "spin" to see if it spins. If it does, then go through the cycles until you notice what your washer is not doing.

**Warning** Although washers are fairly easy to work on, there are moving parts and wires in there, so please be careful with your hands**

:)

Nov 11, 2009 | Cars & Trucks

1 Answer

Spin cycle is very loud, used to be very quiet.


It could be Quite a few things either not level to the ground or off track on the inside. try running washer without clothes see if it still makes that sound.

Jun 25, 2009 | 2006 Maybach 62

Not finding what you are looking for?
2000 Honda Accord Logo

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...