Question about Cars & Trucks

1 Answer

Engine needs to be removed need instructions - Cars & Trucks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Cars & Trucks Expert
  • 149 Answers

Disconnect and remove the battery, drain the cooling system and remove the radiator, to insure it doesn't get damaged and to afford more working space.Drain the engine oil and remove the alternator and power steering pump (if equipped) Disconnect all electrical connection and,using masking tape, tag all connectors for the reinstall process, same with the vacuum hoses, and secure them out of the way. Disconnect and plug the fuel lines and throttle cables, securing them away. Disconnect the exhaust head pipe, torque converter bolts and transmission bell housing bolts. As the engine in the pic shows, the motor mount does not connect to the trans so you will have to support the trans (or remove it with the engine and separate it later) Using an engine support fixture and engine cradle, slightly lift the engine a little to remove the engine weight from the mounts, remove the mounts, pull (or pry if necessary) the engine away from the trans, and raise the engine till it clears the engine bay. Make sure you have disconnected the hidden ground wires usually located on the firewall side of the block. Good luck

Posted on Apr 21, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 Chrysler Pacifica coil pack replacement instructions


It says you need to remove the upper intake manifold to get to the coils,here's the link to it,then I will send the other link to removing the coils too. Repair Guides Engine Mechanical Components Intake Manifold AutoZone com Here's the second link on removing your coils. Repair Guides Distributorless Ignition System Ignition Coil AutoZone com

May 14, 2017 | Chrysler Cars & Trucks

1 Answer

I need printable instructions on removing and


sorry iam in spain and have no access to this sort of information,but if you ask a local mechanic iam sure they will do it for you with no need of a manual

Nov 02, 2013 | 2004 Ford Taurus

1 Answer

1989 FORD F350 460 ENGINE . NEED DIAGRAM TO REMOVE FRONT TIMING COVER


I do not have any diagrams but HERE are a good set of written instructions, this is an easy engine to work on.

Feb 07, 2012 | 1989 Ford F 350

1 Answer

Automatic trainsmission removing it from a 1993 ford escort 1.9 engine


you need a haynes repair manual it has pictures and instructions how to remove transaxle you also need all basic mechanic tools you need floor jack, 2 jack stands, and a engine support fixture or engine lift crane support engine when you remove transaxle.

Nov 13, 2011 | 1994 Ford Escort

2 Answers

How do I install a new belt?


Hi.

Follow below for the V6 Engine...

jshreader_15.jpg

  1. Raise and support the vehicle.
jshreader_16.jpg

  1. Remove and discard the drivebelt tensioner clip (if fitted).
  2. Remove the accessory drive belt.
  1. Rotate the belt tensioner counter-clockwise.
    • Use a 3/8 inch square drive bar to rotate the belt tensioner.
  1. Remove the belt.
Installation

  1. To install, reverse the removal procedure.


If you need instruction for the V8 Engine, let me know and I will get that for you.

I hope this helps you.

Thanks...

Dec 01, 2010 | 2001 Jaguar S-Type

1 Answer

Where is the starter


it is in front of the engine down and slightly to the right. You have to remove the transmission shifter cable before you can remove the electric cables and starter bolts.

Please see my tip at http://www.fixya.com/cars/r5973094-starter_replace . These are generic instructions. If you get stuck or need specific instructions for your car, please get back to me with model, year and engine info.

Oct 08, 2010 | 2001 Hyundai Accent

2 Answers

Where is the thermostat located


2000 Buick Century 3.1L SFI OHV 6cyl

1ae9cae.jpg

Fig. Unfasten the water outlet attaching bolts, then remove the outlet-3.1L engine shown

419be63.jpg

F
ig. View of the thermostat in its seat in the intake manifold-3.1L engine shown

cb114eb.jpg

Fig. Remove the thermostat from the housing.


Hope this helps (remember to rate and comment this).


Oct 01, 2010 | 2000 Buick Century

1 Answer

Lifetrs gone bad. need how fix to instructions


assuming you have a 2.2 engine, the head has to be removed to replace the lifters.

Sep 13, 2009 | 2001 Chevrolet Cavalier

1 Answer

Engine Removal


it will come out fro, the top you will need to remove the bonnet and get a engine crain our block and tackle.

and then its just a matter of unbolting every thing and unplugging all the wiring.
don't undo the a/c just remove it from the engine block and tie it out the way
its all not to hard just time consuming good luck and be pashent as when you stress **** gets brocken

Dec 01, 2008 | 2002 Mitsubishi Lancer

1 Answer

Remove starter


You will need to remove the front motor mount by placing a hydraulic jack under the engine (but not on the oil pan), lifting the engine slightly. Remove the front motor mount, and lower the jack (and engine) which will allow you access to the last bolt and allow for ease of removal/installation of the starter.

Oct 19, 2008 | 1998 Plymouth Neon

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...