Bcm location on mercury motego 2005 - Cars & Trucks

Question edited for clarity, FULL 'year make model'.
Question moved to model category.

There isn't a fuse. If there was, someone could break the window, open the door and quickly remove the fuse. The anti-theft security system is a complex system involving the antitheft module, sensors, the ECM and the BCM. They are computers that can't be reprogrammed to remove anti-theft feature.

'Thinking' is not good. What brings you to this conclusion? There are ways to check for parasitic draw and thinking is not one of them :>D

You need a good auto-electrician with a pro grade scan tool computer.

Fuse Box Diagram Mercury Grand Marquis (2003-2011)

https://fuse-box.info > mercury > mercury-grand-marq...
Fuse box diagram (location and assignment of electrical fuses and relays) for Mercury Grand Marquis (2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011).

...

Fuses?

Fuse box location and diagrams: Mercury Mountaineer (2002 ...

YouTube https://www.youtube.com > watch


2:55 See more on our website: https://fuse-box.info/mercury/mercury-mountaineer-2002-2005-fuses-and-relaysFuse box diagram (location and ...
YouTube · Fuse Box Info · Dec 30, 2018

Mercury Mountaineer (2002-2005) fuses and relays

Fuse-Box.info https://fuse-box.info > mercury > mercury-mountainee...

The fuse box is located under the instrument panel on the driver's side. The location of the fuses in the passenger compartment: Mercury Mountaineer (2002-2005 ...

https://www.google.com/search?q=2002+mercury+mountaineer+body+control+module+location

seems to think the same as Explorer

There isn't one. Cruise Control is a joint computer operation by the BCM and ECM.

Mercury Villager (1999-2002) fuses and relays

Fuse Box Diagrams https://fuse-box.info > mercury > mercury-villager-19...

Here you will find fuse box diagrams of Mercury Villager 1999, 2000, 2001 and 2002, get information about the location of the fuse panels inside the car, ...

https://www.google.com/search?q=mobile+auto+electrician+near+me

..

Under the dash. Find the fuse panel, you found the BCM. Called GEM on Ford's. If the fuses are on the side of the dash, you still have to pull it from the bottom. Some of these are year specific and they do have to be programmed to the car.

The SJB is fords BCM located under the front passenger side floor console . Five digit number on the right center of sticker .

From the service manual, which is available relatively inexpensive at Promanuals.net here


Both front wiper relays are located in the IPDM E/R (intelligent power distribution module engine room)

Wiper switch (combination switch) is composed of a combination of 5 output terminals and 5 input terminals.
Terminal combination status is read by BCM (body control module)

BCM controls front wiper LO, HI, and INT (intermittent) operation

IPDM E/R operates the wiper motor according to CAN communication signals from the BCM.
Power is supplied at all times

through 50A fusible link (letter f , located in the fuse and fusible link box)

to BCM terminal 70, and

through 20A fuse (No. 39, located in the IPDM E/R)

to front wiper relay, located in the IPDM E/R
With the ignition switch in ON or START position, power is supplied at all times

through 10A fuse [No. 1, located in the fuse block (J/B)]

I AS A FORD TECH IN A LOCAL DEALER FOR 20 YEARS, THERE IS NO MODULE CALLED A BCM IN YOUR CAR, GM CALLS IT A BCM OR BODY CONTROL MODULE, THE GEM AND GM BCM SERVE THE SAME FUNCTION, AND YES THE DOOR LOCKS RUN THROUGH THE GEM ON FORD'S, AND YES IT MAY BE ON THE ELECTRONICS TRY IN THE TRUNK, IT IS THE WINDSTAR THAT HAS IT ABOVE THE FUSE BOX, SORRY, BEEN A FEW YEARS SINCE I RETIRED. OH GEM STANDS FOR GENERIC ELECTRONIC MODULE