Question about 2004 Acura RSX

1 Answer

P0171 BANK 1 SYSTEM TOO LEAN

WHAT IS THE PROBLEM WITH THAT

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Acura Master
  • 1,209 Answers

Sounds like you are in need of a new O2 sensor. Bank 1 is the side of the engine that your no1 cylinder is located. bank 2 is the opposite side of the engine.

Posted on Apr 21, 2013

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76691 Answers

SOURCE: intermiting combustion 98 acura

Clean the MAF sensor with CRC brans MAF spray cleaner.

Posted on Nov 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

98 dodge ram 1500 5.9L 2wd codes P0300, P0301, P0302, P0303, P0171. What all do I need to do to resolve??


the p0300--p0301-p0302=p0303 are misfire codes and can mean needs tune up or wiring problem and p0171 is system to lean bank 1 with this code if you correct it will probably correct the misfire codes your receiving
http://www.obd-codes.com/p0171 Fixing Hesitating Car P0171 Code YouTube P0171 System Too Lean Bank 1

Aug 26, 2016 | Dodge Cars & Trucks

2 Answers

What does P0171 system to lean bank 1 mean on my 2000 Lexus RX300?


Try this little cheap trick, happens all the time

Apr 10, 2014 | 2000 Lexus RX 300

1 Answer

Engine light on


P0171 ; Fuel Trim System Lean (Bank 1)
P0174; Fuel Trim too Lean (Bank 2)
fuel trim is system to modify injector pulse if system go lean it will go rich when the system is too much lean and is max.rich it code
look for 02 sensor bank 1 and 2 data
hope it helps

Mar 31, 2014 | 2003 Chevrolet Malibu

1 Answer

I have gotten the codes p0171 and p0134 what are they


P0171 indicates system lean (bank 1). P0134 indicates no activity from sensor 1 on bank 1. You could have a bad O2 sensor or an actual lean condition. Possible causes of a lean condition include a restricted fuel filter on a vacuum leak.

Jun 02, 2011 | 2000 Nissan Maxima

1 Answer

Engine check light on error code 1 is P0171 system too lean bank 1 error code 2 is P0174 system too lean bank 2


P0171 system too lean bank 1
P0174 system too lean bank 2
links to information on the codes

it means that the O2 sensors in your vehicle detected a lean condition in their respective banks. this could be caused by a dirty MAF (mass air flow) sensor or a vacuum leak downstream from the MAF sensor

sometimes you can clean the MAF with electronics cleaner or brake cleaner but be sure to take it off the vehicle first. be careful not to damage the MAF while spraying the cleaner, and allow it to dry completely before installing it on the vehicle.

May 21, 2011 | 2001 Jaguar S-Type

2 Answers

P0313;Misfire Detected with low fuel P0171-System too lean{bank1} P0174 System too lean{bank2} drive cycle


P0313 - Misfire Detected with Low Fuel
P0174 -System too Lean (Bank 2).
P0171 -System too Lean (Bank 1).

P0171 and P0174 mean "system too lean" for banks 1

Aug 24, 2010 | 2000 BMW 3 Series

3 Answers

2003 Ford Ranger 4x4 extended cab- diagnostics checked and got these codes- P0171, P0174, P0300, P0316. Can you tell me what they mean?


P0171------ system too lean bank#1
Po174------ system too lean bank#2
For these 2 codes, try cleaning the maf sensor (mass air flow), that is mounted in the big black hose that goes from the air filter housing to the throttle plate, if it is dirty, that will cause those 02 sensors to send a signal to the computor to lean the air fuel mixture. If cleaning it doesn't work, the sensors will probably need changing.
P0300---- Random/multiple cylinder misfire
P0316---- Cylinder misfire at start up---- first 100 revolutions.
On those 2 codes, you have to do some testing to find out why there is a misfire.
Possible causes:
dirty/malfunctioning injectors
weak coil pack
fowling spark plugs/wires
Low fuel pressure

May 11, 2010 | 2003 Ford Ranger Regular Cab

2 Answers

Diagonostic trouble codes reported p0171 p0174 p0302 2001 Taurus, only reports P0171


P0171 is system too lean bank 1, P0174 is too lean bank 2, and 302 is misfire bank 1. Look for vacuum leaks. If you don't find them, put a vacuum gage on it can check. The P0171 is almost always a vacuum leak. If not other possibilities are front O2 sensor is too old and should be replaced (if mileage is greater than 100k then replace). Try injector cleaner. Misfires are usually bad spark plugs, but could possibly be caused by insufficient fuel. I've never had a car of mine in bad enough shape to have that error.

Sep 14, 2008 | 2001 Ford Taurus

Not finding what you are looking for?
2004 Acura RSX Logo

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...