Question about Cars & Trucks

Open Question

08 opel astra 1.3 diesel how to replace fan belt tensioner

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
pugwash814
  • 377 Answers

SOURCE: opel astra headlight adjustment

two screws on each headlight control the direction the headlights are aimed. One screw, usually at the top but sometimes below the headlight, adjusts the headlight up and down. The other screw, located to one side, controls the headlight from right to left. Turning the appropriate screw one direction or the other will change the direction the headlight points.
In order to aim your headlights you need to have a flat vertical surface you can aim your headlights at in front of a level surface on which to park the car. If your driveway is level your garage door is the perfect place to aim your headlights.
The tools you will need for this job are simple. Masking tape is used to mark where the headlights are to be aimed and a screwdriver is needed to adjust the headlights. A tape measure will be necessary to measure the distance of the vehicle to the surface you're using to check the aim and to measure the up and down distances from your marks

Posted on Nov 07, 2009

Ad
  • 76 Answers

SOURCE: timing belt on vauxhall astra

is the belt the same size as the one that come off? try taking the tensionor all the way off and then fit the belt

Posted on Feb 08, 2010

  • 1 Answer

SOURCE: opel astra c14se bad timing spark

may be the tendur it not gd and chek the valve

Posted on Apr 10, 2010

  • 10865 Answers

SOURCE: I purchased an Opel Astra

Hello. Here are some free downloads http://www.uploadcity.com/?q=opel+astra+f+owner+manual

Joe

please rate this answer 4 thumbs up. thank you.

Posted on Oct 04, 2010

tavor_george
  • 5 Answers

SOURCE: Fan belt diagram 1993 Opel astra

if you go to google it should tell you what it is.. you would have to type in the year model and type of vehical and also the type of motor

Posted on Jun 18, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Opel astra 1.4 cam timing marks


check that you have the timing right for no 1 piston as you may be 180 degrees out.

Jan 25, 2015 | Opel Cars & Trucks

1 Answer

Egine light flashes rev counter went haywire then stopped working opel astra 1.7 litre diesel 03


know more about toyota but try a speed sensor-trans related-good luck-I know no more about that vehicle-JT

Nov 04, 2014 | Opel Astra Cars & Trucks

2 Answers

What's the timing belt diagram for 2008 Opel Astra 1.8L, and what size wrench?


try looking under the hood there may be a belt diagram , if not try the owners manual orlast look on line for the diagram ,just Google searc it

Jul 15, 2014 | 2008 Opel Astra 1.8

1 Answer

Fan belt diagram 1993 Opel astra


if you go to google it should tell you what it is.. you would have to type in the year model and type of vehical and also the type of motor

Jun 18, 2012 | Opel Astra Cars & Trucks

1 Answer

How to change the fan belt on a Peugeot 405 diesel


undo the bolts on the alternator and swing it inwards towards the engine,replace the belt and use the alternator to tension the belt with a long tyre iron,the belt should have 1/2"play in the longest run.(yes it is that simple)

Feb 20, 2011 | Peugeot 405 Cars & Trucks

2 Answers

How to adjust fan belt on izusu bighorn 3.1d


Find the tensioner. Tensioner is a pully to adjust the tension of the belt. Mostly the Alternator is the tensioner pully. Check it. ok

Mar 10, 2010 | 1996 Isuzu Trooper

1 Answer

Serpintine belt replacepent


Installation > 5.9L Diesel Engine 5.9L Diesel Engine
WARNING Do not attempt to check belt tension with a belt tension gauge on vehicles equipped with an automatic belt tensioner.

Drive belts on diesel engines are equipped with a spring loaded automatic belt tensioner. This belt tensioner will be used on all belt configurations, such as with or without air conditioning.
  1. Depending on the year of the vehicle, a 3/8 inch or 1/2 inch square hole is provided in the automatic belt tensioner. Attach a 3/8 inch or 1/2 inch drive-long handle ratchet to this hole.
  2. Rotate ratchet and tensioner assembly clockwise (as viewed from front) until tension has been relieved from belt.
  3. Remove belt from water pump pulley first.
  4. Remove belt from vehicle.

49aef87.gif

To install:

WARNING When installing the accessory drive belt, the belt must be routed correctly. If not, engine may overheat due to water pump rotating in wrong direction. The correct belt with correct length must be used. Position drive belt over all pulleys except water pump pulley.


  1. Attach a 1/2 inch ratchet to tensioner.
  2. Rotate ratchet and belt tensioner clockwise. Place belt over water pump pulley. Let tensioner rotate back into place. Remove ratchet. Be sure belt is properly seated on all pulleys.

Oct 09, 2009 | 2001 Dodge Ram 2500 Truck

1 Answer

Opel Astra 1600 16v jerking at low rpms when car


i got opel astra 160i 95 model. it jerks when the engine is hot/warm when excellerating.

Jun 09, 2009 | 1999 Chevrolet K1500

1 Answer

Serpentine belt diagram for a 5.9 diesel with air and 9 pulleys


5.9L DIESEL
196759.jpg The 5.9L diesel engine accessory drive system (with a/c) consists of :
  1. Generator Pulley (1)
  2. Water Pump Pulley (2)
  3. Idler Pulley (3)
  4. Power Steering Pump Pulley (4)
  5. Radiator Fan Pulley (5)
  6. Crankshaft Pulley (6)
  7. Automatic Tensioner (7)
  8. A/C Compressor Pump Pulley (8)
CAUTION: When installing the accessory drive belt, the belt must be routed correctly. If not, engine may overheat due to water pump rotating in wrong direction. Refer to or for correct engine belt routing. The correct belt with correct length must be used.
1. Position drive belt over all pulleys except water pump pulley. 2. Attach a 1/2 inch ratchet to tensioner.


196757.jpg The 5.9L diesel engine accessory drive system (without a/c) consists of :
  1. Generator Pulley (1)
  2. Water Pump Pulley (2)
  3. Idler Pulley (3)
  4. Power Steering Pump Pulley (4)
  5. Radiator Fan Pulley (5)
  6. Crankshaft Pulley (6)
  7. Automatic Tensioner (7)
3. Rotate ratchet and belt tensioner clockwise. Place belt over water pump pulley. Let tensioner rotate back into place. Remove ratchet. Be sure belt is properly seated on all pulleys.

Sep 13, 2008 | 2008 Dodge Ram 3500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...