Question about 2000 Dodge Caravan

1 Answer

I need to change the alternator on my 2000 dodge grand caravan sport. Can someone please tell me how to release tension on the serpentine belt? Thank You.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 2,984 Answers

I have to use a 15mm open/closed end wrench on the tensioner pulley. Use the closed end of the 15mm and pull toward you and use the end of a cresent wrench to use for additional torque. You can slip the belt over the fixed pulley (not the tensioner pulley). Give yourself more room by not using the hood bar and use instead a broomstick on the right side to prop the hood open. I recommend a goodyear gator belt too. Good Luck, you'll need it with a caravan. Its on the left side. its the easyest pully to see.

http://www.autozone.com/images/cds/jpg/small/0900823d8010b6d6.jpg


http://image01.shopzilla-images.com/resize?sq=140&uid=762102759

Hope this helps and please don't forget to rate.

Posted on Mar 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 dodge grand caravan serpentine belt directions,diagram 3.3 ltr


0900c1528003c191.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 11: Accessory drive belt adjustment-3.3L and 3.8L engines
All of the belt driven accessories on the 3.3L and 3.8L engines are driven by a single serpentine belt. The belt tension is maintained by am automatic tensioner.

  1. Disconnect the negative battery cable.
  2. Raise the front of the vehicle and safely support it with jackstands.
  3. Remove the right front splash shield.
  4. Release tension by rotating the tensioner clockwise.
  5. Remove the belt and install a replacement.
  6. Proper belt tension is maintain by the dynamic tension.
  7. Install the right front splash shield. Lower the front of the vehicle.
  8. Connect the negative battery cable

May 03, 2012 | 1998 Dodge Grand Caravan

2 Answers

1999 Dodge Caravan 3.8L: I need to change the serpentine belt tensioner assy. Do I need to remove the alternator to access the tensioner assy 15mm mounting bolt ?


the nut that holds the tensioner on is under the alternator and would be much easier to remove with the alternator out of the way.

Jun 05, 2011 | 1999 Dodge Caravan

1 Answer

How do I loosen the tension pulley on the serpentine belt to remove the alternator?


mabpest_11.gif
tensioner is pully just below the filler cap for the power steering..use 15mm socket breaker bar and pull clockwise to release tension

Jan 31, 2011 | 1998 Dodge Grand Caravan

1 Answer

How do you release the tension from the serpentine belt tensioner for a 2005 dodge grand caravan?


most any auto zone or advance auto should print you out a diagram and let you use a tension tool by just leaving a small deposit to insure it's return. Should be a small wheel about 4" across with a bolt in the center. putting the tool or a half inch drive socket that fits the bolt head and turning clockwise should release tension but sometimes they're hard to get at hence the tool. usually just below the alternator and/or power steering resevoir.
hope this helps you

Nov 19, 2010 | 2005 Dodge Grand Caravan

1 Answer

Replace serpentine belt on 1992 dodge grand


Click on the following free direct Link.
It has the correct Belt Diagrams for your 1992 Dodge Grand Caravan wirh either the 3.0L SOHC V6 or the 3.3L V6.

http://www.2carpros.com/car_repair_information/year/1992/make/dodge/model/grand_caravan/1992_dodge_grand_caravan_drive_belt_routing_diagram.htm


Included on the Diagrams are the Instructions on "Rotating" the Automatic Tensioner. See Below for additional Instructions to make your job easier.

"HOW TO": I professionally prefer the Serpentine Tensioner Tool.
Standard Rules to Removal the Serpentine Belt with an Automatic Tensioner:
1. Find the Tensioner(s).
2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (located on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening located on the Tensioner Arm) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.
4. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.

Standard Rules for Installing the Serpentine Belt with an Automatic Tensioner:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.


Before You GO:
Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!

Apr 11, 2010 | 1992 Dodge Grand Caravan

2 Answers

Need serpentine belt routing diagram for 1994 Dodge grand caravan


3.3L?
Looking at the engine from front (right side of the Van): Stating at the Top, Going Left to Right and Clockwise:
Over the Alternator
To under the Idle Pulley,
To Over the AC Compressor.
To the Left Side of the Water Pump.
To the Right side and Under the Crankshaft Pulley
To the Right side and Over and Down the Tensioner
To Under the Power Steering Pump
And Back up-to the Left side of the Alternator.
Advise when puting it on:
Put the Belt around everything else accept for the Alternator. After it is around all the rest of the Pulleys - Pull the belt up - tight from the Power steering Pump and the Idle Pulley to form a loop, holding the Belt close to the Altenator Pulley.
Using the 15mm wrench or belt tensioner bar - rotate the Tensioner Pulley towards the front of the Van and then place the belt over the Alternator.
Let me know if this helped or if you have additional information or questions. Feel free to contact me at FixYa.com!

Jan 21, 2010 | 1994 Dodge Grand Caravan

2 Answers

02 DodgeGrand Caravan Sport--battery light came on


Get your charging system checked out. Your alternator may not keeping up, or your battery may be failing. To get a good answer, get it checked out.

Nov 23, 2009 | 2000 Dodge Grand Caravan

2 Answers

I need to replace the alternator on my wife's 2000 dodge grand caravan sport. How do I go about this?


moz-screenshot.jpgmoz-screenshot-1.jpg Removal & Installation

3.0L Engine
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Remove or disconnect the following:

    Negative battery cable Wiper module Accessory drive belt Alternator mounting bolts Alternator harness connectors Alternator

To install:
  1. Install or connect the following:

    Alternator Alternator harness connectors Alternator mounting bolts. Tighten the bolts to 40 ft. lbs. (54 Nm). Accessory drive belt Wiper module Negative battery cable
  2. hope this helps let me know if you need more. dc

Jun 24, 2009 | 2000 Dodge Grand Caravan

1 Answer

How do you replace a serpentine belt on a 2002 dodge grand caravan?


you need a 15mm wrench and skinny hands or a long belt router. place wrench on tensioner bolt and pull to rotate clockwise,at same time undo belt always holding tensioner, after removing belt from a couple pulleys release tensioner and finish removing belt from engine,for installacion reverse procedure.

Jun 10, 2009 | 2000 Dodge Caravan

Not finding what you are looking for?
2000 Dodge Caravan Logo

300 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...