Question about 2004 Pontiac Vibe
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Remove the Glove box. You will then have access to the Blower unit. There are 3 screws that are holding the blow unit in place. You will need a Phillips screw driver and a 1/4 socket. Once you have located the unit remove the 3 screws and the unit will fall straight down. Unplug the wire harness and then reinsert the new Blower Motor. If you purchase an original GM part this makes life much easier, you just screw the 3 screws back into the holes and then plug the wire harness back in and reinstall the glove box. If you use an aftermaket part you will need to do some wire splicing to make it work but it is a 10 to 20 minute job depending on which part you decide to replace the Blower with.
Posted on Feb 04, 2009
Remove the brake caliper
Remove the disc, (rotor)
Remove the 34mm nut on the axel shaft
Remove the three (3) bolts from the back side
You will need a wheel puller (three jaw will work well)
Place the puller over the hub and tighten, this will push the shaft out of the hub. Now you have to pull the hub assy. out of the mounting bracket. I found hitting each side,of the hub with a lead hammer to work well. Don't forget to disconnect the ABS senser on the back side of the hub assy.
Do not over tighten the 34mm axel nut when you install the new assy. If you use an impact whrench on it you will damage the bearing.
Posted on May 03, 2009
The low side pressure seems ok the high side would help,Is your compressor cycling and is the air coming out even slightly cool?slight over charge cold effect cooling ability.I wish I could be more help. I will have to think about this one.maybe you could make sure your temp.door is actually in the commanded cold position.
Posted on Aug 26, 2009
IS THERE ANY PROBLEM WITH YOUR A/C CONTROLS? -DOES AIR BLOW OUT WHERE ITS SUPPOSED TO AND DOES TEMP CONTROL WORK? - IF A DOOR IS STUCK OR MOTOR COUPLING FOR DOOR IS BAD IT WILL TICK OR POP TRYING TO MOVE
Posted on Sep 26, 2009
Tips for a great answer:
Feb 12, 2015 | 2006 Pontiac Vibe AWD
Jun 21, 2014 | 2006 Pontiac Vibe
It's disconnected or off the track
Mar 01, 2013 | 2003 Pontiac Vibe
Mar 14, 2012 | 2003 Pontiac Vibe
Aug 25, 2009 | 2003 Pontiac Vibe
Feb 17, 2009 | 2003 Pontiac Vibe
39 people viewed this question
Usually answered in minutes!