Question about Cars & Trucks

Open Question

Setting a britool evt1200rr torque wrench - Cars & Trucks

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 840 Answers

SOURCE: Engine torque settings VW lt 35 1993 2.4 turbo diesel. Code ACL

bob go to collsionrepairadvice.com and I will send the download to you its a big file

Posted on Mar 13, 2009

  • 11 Answers

SOURCE: I have a weird torque

the dial is for 161 162 ------168 etc count it up to 228

Posted on Apr 23, 2009

  • 333 Answers

SOURCE: I need to know the torque wrench settings for

The small bolts holding the caliper to the bracket are 20 ft/lbs
The larger bolts holding the bracket to the hub are 79 ft/lbs

Posted on Sep 18, 2009

muntieiow
  • 4 Answers

SOURCE: kia picanto wheel torque wrench settings

100 NM

Posted on Mar 20, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Torque specifications


You have the wrong size Torque Wrench. IF you Torque Wrench measures nm, and it max'd out @ 130, you need a larger Torque Wrench. Convert nm to Ft. Lb and use these if necessary.

Sep 06, 2014 | Cars & Trucks

1 Answer

Spark plug torque settings


the torque on the spark plugs for your 2005 Honda Civic. remember to use anti seize on the threads, screw them in by hand to ensure they are not cross threaded, then if you are using an inch lb torque wrench it will be 156 inch lbs. or if a ft lb torque wrench would be 15-16 foot lbs.

Aug 03, 2014 | 2005 Honda Civic

2 Answers

Citreon xsara 1999 1.8 16 valve cylinder head torque settings


If yours is an Xu series engine, you need to use a torque wrench and an angle dial wrench. Tightening is in 3 stages.
  • Stage 1: Tighten up to 60Nm (44 lb/ft) then fully loosen
  • Stage 2: Tighten up to 20Nm (15lb/ft) change to angle dial wrench
  • Stage 3: Angle tighten to 300 deg.
To avoid confusion, do stage 3 in 3 steps, tighten 100 deg each round and repeating the cycle until 3 rounds.

07718717-6a90-48f5-a87c-bc1ff81d67bd.jpg

04a9b611-4f0b-4da6-9052-a1cb2e517c02.jpg

Jun 13, 2014 | 1998 Citroen Xsara 1.6

1 Answer

How can i reach a torque setting of 305nm when my wrench only reaches a max of 200nm please any one help i am thinking that it can be done in 2 stages yes or no


It is possible to use a simple torque wrench extension bar, which fits onto the square drive of the torque wrench.
http://www.dmctools.com/Products/torque_conversion_charts.html
At the other end of the extension bar is a male square drive for the socket. This increases the leverage of the torque wrench by a ratio which is the total length of the wrench plus bar divided by the length of the torque wrench only. You multiply the torque reading by this ratio.
Note that NO increased torque is obtained by fitting an extension on the handle end of the torque wrench. The applied torque will still be the same as the torque wrench reading in this case.
Then there is a more expensive tool, a torque multiplier. These are often fitted to the output shafts of winches etc, and consist of a small gearbox which fits on the square drive of the torque wrench. On the other side is a male square drive for the socket.
http://www.tjtools.com.au/torquemultiplier.htm
They are geared in various multiplier ratios from 4:1 to as much as 40:1. On the gearbox casing is a reaction bar which is braced against something to keep it in place as the torque is applied.
They are expensive but you can hire them also.

Mar 16, 2012 | 2005 Ford Falcon

1 Answer

Hi can you tell me the torque setting for the cylinder head on a 1995 C200 Mercedes W202 series Thanks Ken


if this is a aluminum head it will be a torque to yeild. you will need brand new head bolts and a torque to yeild wrench, torque to yeild is not a set value but the stretching point of the bolt, wich a torque to yeild wrench will tell you when the bolt is starting to stretch then you stop and torque is achieved. often the starting torque is approx 30pds then you go back through with the torque to yeild wrench. if it has a cast iron head it will have a set value determined by the manufacture which on this car i do not know off hand. I hope i at least led you in the right direction

Mar 18, 2010 | 1995 Mercedes-Benz C-Class

2 Answers

Torque settings


  1. Tighten the cylinder head bolts sequentially in three steps. NOTE: Perform each step twice. 1st step torque: 39 Nm (4.0 kgf-m, 29 ft. lbs.) 2nd step torque: 69 Nm (7.0 kgf-m, 51 ft. lbs.) 3rd step torque: 98.1 Nm (10.0 kgf-m, 72.3 ft. lbs.) Use a beam-type torque wrench. When using a preset-type torque wrench, be sure to tighten slowly and not to overtighten. If a bolt makes any noise while you are torquing it, loosen the bolt, and retighten it from the first step.

Aug 02, 2008 | 2004 Honda Odyssey

4 Answers

Torque wrench settings


please understand there are a lot of items on a car that require torque settings every thing from the lug nuts to every engine bolt, and transbolt. please be more specific

Jul 03, 2008 | 1999 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...