Question about 1996 Oldsmobile Cutlass Supreme Coupe

3 Answers

Cost of labor and parts to fix door handle to 1996 Cutlass Suprem

How much will it cost to fix my door handle to my Cutlass Supreme including Labor and parts

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

I also have Oldsmobile Cutlass, faced the same problem, so i replaced the door handle from automotix.net/usedautoparts/oldsmobile-cutlass_supreme-inventory.html ,they fixed it with very less amount

Posted on Apr 30, 2013

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 527 Answers

Sir,
It will be around 100$. Check all these links to find the match of your parts. Let me know if is not matched...
Link 1
Link 2
Link 3

Thanks Good Luck
Appreciate to rate as "Fixya"

Posted on Mar 12, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Oldsmobile Master
  • 2,984 Answers

Unless you are the same poster with the cutlass, I am cut and pasting the same remarks:

It would cost you WAAAY less if you pick one up on ebay or craigslist or something and do it yourself. Not a difficult task. Go to a library or auto parts store and pick up the manual for your make/model. You can do this. No special tools required, but you may want to pick up a door panel fastner removal tool....$5.00 if that.

Posted on Mar 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 Ford Focus outer drivers door plastic handle broke loose from inside where the mechanism is supposed to grab hold of latch & release/open door. Cannot open door from outside. What is the part or...


Cost? Well it depends on the shop labor rate where you take it to get repaired. It should require about 1 hour of labor to replace.
Dorman makes a replacement handle for your vehicle it is Part Number 79354. This same number will fit either the right side or the left side. It costs about $30. (It will probably cost more if the shop supplies the part...They have to mark it up in order to make a profit.)

Feb 23, 2011 | Ford Focus Cars & Trucks

1 Answer

Needs a new torque converter. How much will this cost?


TORQUE CONVERTER COST ABOUT $250.00 NOT INCLUDING LABOR COST ABOUT $1500.00 AT DEALERSHIP.A SMALL GARAGE CHARGE ABOUT $500.00 TO DROP TRANSMISSION INSTALL NEW TORQUE CONVERTER.

Dec 09, 2010 | 1996 Oldsmobile Cutlass Supreme Coupe

2 Answers

Its ok, to buy 1998 ford taurus wagon, 185 000 km


The 1998 Ford Taurus is a pretty reliable vehicle. Occasional problems on this vehicle are failure of the Camshaft Position Sensor and Actuator; Restricted EGR passages, 3.0L VIN S only; the Differential Pressure Feedback EGR (DPFE) Sensor; the Powertrain Control Module (PCM); and the Secondary Air Injection (SAI) Pump. The cost to repair the Camshaft Position Sensor and Actuator is estimated at $210.00 for parts and $65.00 for labor. The cost to clean out the restricted EGR passages is estimated at $5.00 for parts and $78.00 for labor. The cost to repair the DPFE Sensor is estimated at $76.00 for parts and $32.50 for labor. The cost to repair the PCM is estimated at $320.00 for parts and $65.00 for labor. The cost to repair the SAI Pump is estimated at $200.00 for parts and $52.00 for labor. Other problems on this vehicle are failure of the Transmission Range (TR) Sensor and the Door Ajar Switches. The symptoms associated with failure of the TR Sensor are loss of sound from the radio, loss of power window operation and loss of power steering operation when the car is shifted from park to reverse and/or drive. The cost to repair the TR Sensor is estimated at $40.00 for parts and $39.00 for labor. The cost to repair the Door Ajar Switches is estimated at $22.00 for parts and $45.50 for labor per door and can range from one to four doors. All prices are estimates based on $65 per flat rate hour and do not include diagnostic time or any applicable sales tax. I would advise you to have the car looked at by a trusted mechanic. With 115,000 miles on the odometer it can have some of these problems which are not severe. The money you spend to have it gone over by an expert will be money well spent.

Nov 21, 2010 | 1998 Ford Taurus

1 Answer

How Long to replace a power steering pressure hose? Labor cost?


6 cylinder engine remove and replace pressure power steering hose.

2.2 hrs X there shop labor rate = your labor cost.

Pre Mitchell labor guide

Jun 11, 2010 | 1992 Oldsmobile Cutlass Supreme

1 Answer

About how much will it cost to fix the outside car door handle


parts & labor about 125.00 depends on what your labor charges are

Feb 09, 2010 | 2006 Dodge Charger

1 Answer

1983 Cutlass Supreme passenger door wont open from outside


You will have to remove the door panel and inspect the door handle mechanism. I should'nt cost much more time then money. In my case I just have two screws to remove. One at the handle to open the door another at the handle to grab the door to close it. Then you pull the panel, its retained with clips. In your case I have no idea, all I can tell you is that you have to remove the panel to take a look and find out whats going on. Then you can let me know in order to help you further.

Jun 18, 2009 | 1992 Oldsmobile Cutlass Supreme

2 Answers

Need a rebuilt starter


$100 approx cost for part. Go to (repairpal.com) enter your info & pick replace starter, and it will give you price for your area by zip code.

May 03, 2009 | 1992 Oldsmobile Cutlass Supreme

1 Answer

How to change horn in 1996 cutlass suprem


Unhook the battery cable for a couple of minutes and see if light comes back on after re-attaching.

Apr 08, 2009 | 1996 Oldsmobile Cutlass Supreme Coupe

1 Answer

Cost of labor and part door handle of 1996 Cutlass Supreme


It would cost you WAAAY less if you pick one up on ebay or craigslist or something and do it yourself. Not a difficult task. Go to a library or auto parts store and pick up the manual for your make/model. You can do this. No special tools required, but you may want to pick up a door panel fastner removal tool....$5.00 if that.

Mar 12, 2009 | 1996 Oldsmobile Cutlass Supreme Coupe

1 Answer

How much will it cost to fix my door handle on my 1996 cutlas sup


Sir,
25 to 35$.
click this link for more info

Thanks Good Luck
Appreciate to rate as "Fixya"

Mar 12, 2009 | 1996 Oldsmobile Cutlass Supreme Coupe

Not finding what you are looking for?
Cars & Trucks Logo

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...