My brake (running lights) dont turn on only when i step on the brake. nor my licesne plate work nor my gauges lights work. i got new bulbs for my brake light.
First, your instrument panel lights. Make sure to check the knob on the dashboard to the left of the instrument panel which controls
the brightness of the instrument panel lights. Push the knob to get it to pop out. Turn the knob to adjust the brightness.
If that is not the problem, go to your fuse boxes. Check those in the interior fuse box (left kick panel, below the dash--fuse chart on the cover) and those in the engine compartment fuse box (far upper left as you face the car). If, after you replace anything that has blown, it blows again, that would suggest a short somewhere in the system.
If you don't find any blown fuses (and I think you will) then it's time to go to the light bulbs. The tail light bulbs are accessed from inside the trunk. The license plate bulbs are just above the license plate and are accessed by removing two screws that hold the fixture in, then taking off the click plate and removing the bulbs.
Hope this is of some help.
Oct 29, 2009 |
1994 Honda Accord