Question about 2003 Chevrolet TrailBlazer

Open Question

2003 chey trailblazer seal around rear license

Seal around rear license plate is falling behind panel. how would i replace it

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 74 Answers

SOURCE: License plate light does not work

you have a fuse box under the hood and in the in side the fuse you are looking for is in the in side that should take care of it if not you have a bad ground

Posted on Jul 07, 2008

  • 28 Answers

SOURCE: 2002 CHEVY TRAILBLAZER LICENSE PLATE LIGHTS(2)

there is none, will have to replace lights, should came on with running or parking lights.

Posted on Feb 22, 2009

SOURCE: how do i replace the license plate bulbs on a 2002

There will be one or two screws or push pins securing the lense. Remove the screw or pin and pull the lense out. Twist the bulb socket and pull out the bulb. If you haven't already purchased the replacement bulbs, it will use a 194 bulb.

Posted on Apr 18, 2009

  • 1027 Answers

SOURCE: license plate light replacement

The license plate lights are in the ledge above the license plate. 2 screws keep the lens cover in place. Remove the screws, and the cover comes off. Just pull the lamp out (wedge base) and replace.

Posted on Apr 18, 2009

  • 1 Answer

SOURCE: license plate bulb needs replacing

Remove license plate. Unscrew the screws on the underside of the bumper. Slide the lights back toward the trunk and then down through the opening. Unscrew bulb and replace with a new one.

Reverse steps to reinstall the lights.

Posted on Feb 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The license plate new bulbs fail to illuminate an the lift gate locks whenever closed...why?


This answer comes from BlazerForum.com (link is below) for a 2002 Trailblazer:

"It will be a 10a fuse in the under hood fuse box, labeled TRL PRK. If you have towed a trailer lately, and the fuse does not blow when you replace it, I would check the trailer that you used. If you have not towed a trailer, I would check the trailer wiring under the LR or the truck, to make sure none of that is shorting out. Good luck, Korey."

http://blazerforum.com/forum/audio-video-electronics-8/license-plate-lights-out-9102/

Oct 12, 2014 | 2003 Chevrolet TrailBlazer

1 Answer

No ac no heat no power to the to or maybe from the dash control panel


There are 6 bolts that hold the rear trunk panel on the trunk itself: 4 behind the license plate on the outside of the trunk and two inside the trunk panel trim.
1. Remove the license place from the DeVille rear trunk panel.
2. Remove the 4 bolts located below the license plate.
3. Remove the trunk panel (felt) trim inside the trunk.
4. There is a small bolt on each side of inside trunk panel (4mm I believe). Remove them. Each will have a rubber washer on them so you'll know you are removing the correct bolt.
5. From the outside of the trunk, lift out the rear trunk panel. The license plate light (and reverse lights) are removed by turning the light assemblies counter clockwise.

Aug 27, 2013 | 1997 Cadillac DeVille

1 Answer

Tag light is not working. is there a fuse that will get the light turned back on?


The fuse labeled REAR PARK LP 15A in the right instrument panel fuse box powers the rear park lamps, and the tag lamps. If your rear park lamps are working then you most likely need to replace the tag lamps (bulbs). Use the following procedure to replace the lamps.

To Remove:
  1. Remove the two mounting screws from the license plate lamp.
  2. Remove the license plate lamp from the rear bumper fascia.
  3. Remove the license plate lamp socket by turning it counterclockwise.
To Install:
  1. Install the license plate lamp socket by turning it clockwise.
  2. Position the license plate lamp to the rear bumper fascia.
  3. Install the license plate lamp mounting screws.

Feb 17, 2011 | 2004 Chevrolet Impala

1 Answer

2002 chey trailblazer 4by4 light on the swich stay on 2 wheel drive if i put into 4 wheel drive or all wheel drive and one light flash on where ever i put the swich on. feels like is goes in 4 wheel high...


The Transfer Case Control Module (TCCM) in this model year have been known to hang up, try pulling fuse #48 (4WD) in the rear fuse panel located under the left rear seat. Reinstall fuse and see if everything works OK, if not, you probably need to replace the TCCM.

Dec 07, 2010 | 2003 Chevrolet TrailBlazer

2 Answers

Where is gas cap on 325i Sedan 2003 model


Hello. Some have the gas cap located under the rear license plate, others on the outside near a rear tire. Regards, Joe

Jan 15, 2010 | 2001 BMW 325

1 Answer

My 2004 Toyota Sequoia rear door will not open - the handle is broken. How do I get into the door, whith it closed, to make the necessary repairs?


Dig out the broken bits of door handle, then on the right side insert a flat head screwdriver diagonally up and fish around for the release lever.
Push up on the screwdriver handle to manipulate the release lever down and your tailgate will open.
Remove the interior panels by unbolting the 10mm bolt behind the strap and pulling off the interior pieces held on by plastic pop fasteners.
Remove the 10mm bolts around the perimeter of the interior cover plate and let it hang by the harness.
Remove the license plate.
Remove the license plate trim panel (multiple push fasteners from behind and a few 10mm around the lock)
Replace the handle.

Sep 13, 2009 | 2004 Toyota Sequoia

1 Answer

License plate light replacement


The license plate lights are in the ledge above the license plate. 2 screws keep the lens cover in place. Remove the screws, and the cover comes off. Just pull the lamp out (wedge base) and replace.

Apr 13, 2009 | 2002 Chevrolet TrailBlazer

2 Answers

License plate bulb on 1997 Cadillac deville


this is straight out of the book ok



  1. Open the rear compartment lid.
  2. Remove the rear compartment lid trim.
  3. Pull back on the rear compartment trim panel.
  4. Unplug the lamp connector from the rear compartment lid wiring harness.
  5. Press the grommet out of the rear compartment lid.
  6. Remove the nuts retaining the lamp assembly to the rear compartment lid.
  7. Remove the bulb.

Mar 07, 2009 | 1997 Cadillac DeVille

3 Answers

Licence light replacement 1996 Cadillac Deville


remove your license and behind it you will find i think two screws then remove that panel and you should be able to get to it.

Jan 22, 2009 | 1996 Cadillac DeVille

Not finding what you are looking for?
2003 Chevrolet TrailBlazer Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...