Question about 2010 Toyota Tundra

Open Question

How to replace a broken radio antenna on 2011 tundra

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Limited radio stations


Check the connection from the radio to the antenna.May not be plugged in.

Jun 01, 2017 | 2011 Kia Sorento

1 Answer

AM/FM radio how can get sound back?


a bad antenna tops list. or the cable fell off to it?
got static with volume up?
sure.
if you remove the ant. jack and put finger on the hot pin inside
you will become a human antenna, and pickup close local stations
or use a length of any wire, to put there and get lots of stations
if that works the radio is ok and antenna is bad.
we do this bench testing.

Oct 11, 2016 | 2011 Jeep Grand Cherokee

1 Answer

How to install the antenna wire that goes from antenna to passanger side windshield/side window mast


Visit the on-line store, know as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem.
Best Manuals

Sep 27, 2016 | 2008 Toyota Tundra CrewMax

3 Answers

1996 Toyota Camry. Need to replace broken antenna to get radio reception. Is this replaceable?


You can replace the whole assembly. It could be catered from junk yard, new Toyota parts store or car radio shops. After market antennas are also available which could be put to work after a little effort.

Apr 14, 2014 | 1996 Toyota Camry

1 Answer

Tundra antenna removal


You will have to un-install the entire antenna system from the inside.
remove the panel carefully adjacent to the antenna system
undo the bolts and clamps that hold the system in place
you can try and install the new antenna piece without disconnecting the transfer wire that goes back to the radio. But usually you will need to get and install a new system.
just to keep you going in the mean time you could just use a old wire coat hanger "classic" just bend the hook straight and shove it in, you have your sounds back.
all the best

Feb 02, 2014 | 2010 Toyota Tundra CrewMax

1 Answer

Check Antenna comes on when I try to use the XM radio. It is a Sonata 2011


It means the system does not have any antenna signal. Check the antenna wiring.

Sep 10, 2012 | 2011 Hyundai Sonata

1 Answer

Radio dose not work


It can be issue with radio fuse or wiring issue of radio.
First test the radio fuse.If its blown out,then replace it.If the fuse i checked ok,then its radio wiring issue.Test the voltage.
Check out few help links provided below,related to car radio problems:---Click the link below:---
Radio Controlling Fuse Location? http://howtobyme.blogspot.in/2012/05/2003-lincoln-aviator-radio-controlling.html

--------
No clock, radio, gps, climate control After Battery Cross Jumped? http://whatisbyme.blogspot.in/2012/05/2006-lexus-ls430-no-clock-radio-gps.html----------
XM satellite radio interface kit Connection? http://technoanswers.blogspot.in/2012/04/toyota-avalon-toyota-xm-satelite-radio.html
--------
Radio Power Antenna wiring diagram? http://technoanswers.blogspot.in/2012/02/radio-power-antenna-wiring-diagram-for.html

--------
Where is Radio Fuse located on 2007 Dodge charger?


http://schematicsdiagram.blogspot.com/2011/12/where-is-radio-fuse-located-on-2007.html

-------
2006 Ford Expedition radio not powering ON? http://technoanswers.blogspot.com/2012/01/2006-ford-expedition-radio-not-powering.html

----------
How to reset Radio code after car battery is died? http://howtobyme.blogspot.com/2011/12/how-to-reset-radio-code-after-car.html

-------------
These details will help.
Thanks.

Jul 21, 2012 | 1990 Audi V8 Quattro

2 Answers

My radio antennae does not work. I hear a


the cable inside that moves the antennae is broken. on many models you can just replace the antennae with cable instead of the entire unit whick will be a lower cost. ask at the volvo dealer.

May 15, 2010 | 1995 Volvo 850

1 Answer

Take out dash(tundra) for antenna installation


You could do an antenna installation without removing the dash. Take out the center assembly with the radio and hvac controls and the glove box. You'll have enough access to run the antenna wire from its stock location to the radio.

Mar 31, 2009 | 2004 Toyota Tundra

1 Answer

Access to tighten my antenna


Is it a power antenna ? or a regular antenna ? you may have to remove the wheel well liner to acess the antenna.Remove the clips that attach the liner.Hope this helps.

Jun 26, 2008 | 2000 Toyota Tundra

Not finding what you are looking for?
2010 Toyota Tundra Logo

Related Topics:

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...