Question about 1992 Toyota Camry V6

Open Question

My 1992 toyota camry won't start, it turn over but won't start.

The fuel pump is working good but it still won't start.

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

ninja_freak3
  • 168 Answers

SOURCE: need instructions to installing water pump on 1992 toyota camry.

e-mail e and we will talk about it

Posted on Dec 23, 2008

c17hydro
  • 2984 Answers

SOURCE: how do i change a fuel pump on a 1992 toyota camry

1992–96 Models NOTE: Be sure this procedure is done in a well ventilated area.

  1. Disconnect the negative battery cable.
  2. Relieve the fuel pressure.
  3. Remove the rear seat cushion.
  4. Remove the floor service hole cover.
  5. Disconnect the electrical fuel pump wiring at the fuel pump assembly. Check for any fuel leakage while in there
Fig. 6: Pull back the rug under the rear seat to access the fuel pump and sending unit cover

7cf94fb.jpg
  1. Remove the gas cap, this will prevent any fuel gas spilling out of any high pressure lines.
  2. Using SST 09631–22020 or an equivalent line (flare nut) wrench, disconnect the outlet pipe from the pump bracket.
  3. Remove the pump bracket attaching screws.
  4. Disconnect the return hoses from the pump bracket, then pull out the pump/bracket assembly.
  5. Remove the nut and spring washer, then disconnect the wires from the pump bracket.
  6. Remove the sending unit attaching screws, then remove the unit from the bracket.
  7. Pull the lower side of the fuel pump from the bracket.
  8. Unplug the connector to the fuel pump.
  9. Disconnect the hose from the pump.
  10. Separate the filter from the pump. Use a small screwdriver to remove the attaching clip.
  11. Inspect all of the lines, hoses and fittings for any sign of corrosion, wear or damage to the surfaces. Check the pump outlet hose and the filter for restrictions.
  12. When reassembling, ALWAYS replace the sealing gaskets with new ones. Also replace any rubber parts showing any sign of deterioration. To install:
  13. Install the pump filter using a new clip. Install the rubber cushion under the filter.
  14. Connect the outlet hose to the pump, then attach the pump to the bracket and tighten to 22–25 ft. lbs. (29–34 Nm).
  15. Engage the connector to the fuel pump. Install the fuel sending unit to the pump bracket.
  16. Install the fuel pump and bracket assembly onto the tank. Use new gaskets. Tighten the pump bracket retaining screws to 34 inch lbs. (4 Nm).
  17. The remainder of installation is the reverse of removal. Tighten each component to specifications. Start the engine and check carefully for any sign of leakage around the tank and lines. Road test the vehicle for proper operation.
PLEASE DON'T FORGET TO RATE!!!! THANKS!!!!

Posted on Aug 30, 2009

emissionwiz
  • 75108 Answers

SOURCE: Where is the fuel pump fuse located in a 1992

it is located inside the gas tank.

Posted on Nov 16, 2009

Mustgo
  • 2359 Answers

SOURCE: my 1999 toyota camry turns over well but wont

Are you one of those people who TOP OFF the tank when filling up?

When the EVAP recovery system soak with few ounce of gasoline......the trap vapor will take few days escape.

EVAP system is design to handle fuel vapor. Few ounce of gasoline can damage the fuel vapor recovery relay and decrease the service live of the recovery lines.

=========

You can accelerate the process by locating the charcoal canister (near the nose of the car and same side as your gas filler door)

MOVE the car to outdoor.

Disconnect the EVAP line and let it air out by itself.

DO NOT introduce any heat source or fan to speed up the process.

Reconnect this EVAP hose and use a small amount of starting fluid at the intake manifold.


Please post more information by Clicking on the comment link.

I will follow up.

Posted on Dec 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Toyota Camry 1992 won't start it turns over,


check the fuel pump to see if it is coming on or it could be a crank sensor

Sep 02, 2013 | Cars & Trucks

1 Answer

98 Toyota Camry


I would call that a good guess after five fuel pumps. Gosh, Jonah, paying for a little diagnostic testing would have saved you the cost of four fuel pumps.

Jul 24, 2013 | Cars & Trucks

1 Answer

1994 another Toyota Camry won't start.


Sounds like a timing chain , worst case, Would you say it's turning over almost too freely?? Look under your cap, and turn motor over, the rotor shouldn't turn if the timing chain is gone, but may turn if it jumped it's timing. Then you'll have to have a look under the timing cover . let me know if this helps

Jan 16, 2013 | 1994 Toyota Camry

1 Answer

I replaced the fuel pump 3 days ago but now my toyota camry 1999 won't start


Do you know for a fact the old fuel pump was faulty ?
Do you know if you are lacking fuel pressure or spark now ?

Dec 19, 2012 | 1999 Toyota Camry

1 Answer

Won't Start! 1991 Camry V6


Do a fault code test on the electonic engine control module. Here is how you do that.

Sep 14, 2012 | 1991 Toyota Camry

1 Answer

1999 toyota camry won't start battery is good, half tank of gas and starter is good? Sometimes it comes on and works fine, and other times it won't start?


see the diagrams and proceed with common sense.
Reset the ignition timing to the specification manufacterur +gap reset to the s. manufacturer Very Important
God bless you


5_22_2012_9_35_55_am.jpg5_22_2012_9_36_23_am.jpg5_22_2012_9_36_46_am.jpg5_22_2012_9_37_02_am.jpg

May 21, 2012 | 1999 Toyota Camry

1 Answer

1991 toyota camry 4 cyl. how to change fuel pump.


I saw this DIY site on how to replace the fuel pump of the 1992 Toyota Camry. This solution can be used in all vehicle types.

http://www.automd.com/62/how-to-replace-a-fuel-pump/

Feb 03, 2010 | 1991 Toyota Camry

3 Answers

1992 toyota camry


hello i have a 1992 camry 4 cyl. i did a tune up on it(spark plugs & wires,air filter,fuel filter,dist. cap rotor) engine light is on now. It shuts off after 5 minutes of driving or idle. could it be a sensor? if so what type? thanks
JC-

Aug 29, 2008 | 1992 Toyota Camry V6

Not finding what you are looking for?
1992 Toyota Camry V6 Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...