Question about Cars & Trucks

Open Question

How to change high level brake light on a ford galaxy

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
ghost4548
  • 776 Answers

SOURCE: High Level Brake bulb replacement

If memory serves, there are two screws holding this light assy to the rear package deck. They are covered (LH and RH side of this assy). remove the covers and using a phillips screwdriver, remove the screws and lift the assy up and away from the rear glass. you now have access to the bulb and socket.

Posted on May 27, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why doesn't the high level brake light work?


High level brake light is connected , in parallel with, all other brake/stop lights.. It is not on a separate fuse, so, check, or replace the other stop lights.
Or could be a bad ground on brake lights, but not on high level light.

May 02, 2015 | 1993 Honda Accord

1 Answer

Brakes lights and side lights


Have you changed the the bulbs lately? If so you may have inserted the bulbs incorrectly and the electrics are lighting up the wrong element in the bulb. Hope this helps :)

Mar 03, 2014 | 2005 Ford Galaxy 2.3

1 Answer

2001 ford f150 brake warning light always on


Ford uses the same light for fluid level indicator, check that sensor, as well as the fluid level.

Sep 06, 2012 | 2001 Ford F150 Styleside SuperCrew

2 Answers

Brake light staying on. on my 2001 ford windstar what might it be


check your master cylinderr fluid level. If full brakes may be worn badly or master cyoinder may be going bad.. if brakes are ok change brake sending unit usually located on master cylinder. do noty drive until you are positive your brakes are good. if fluid level is low in master look for brake fluid under car usually on back of wheel.if no brake fluid on back of wheel inspect brake lines for a hole usually rusted through. if this is helpful please leave me positive feedback.

Dec 27, 2010 | 2001 Ford Windstar

1 Answer

I have a explanation sign showing in red


Usually that is the BRAKE reservoir light saying that the fluid level is low. Open the hood and then cehek the brake fluid level on the brake master cylinder. It will be just forward of the engine firewall almost directly ahead of the steering wheel. The reservior has a high / low level indicator on the side. Use DOT 3 Brake fluid to refill the reservior. When this light comes on it is telling you that your brake shoes and pads are more than 50 percent worn.

Thanks for using FixYa!

Kelly

Mar 09, 2010 | 2003 Ford Escort

3 Answers

Camry CE 2001: Changed the brake light in the


hi the rear high level brake warning light in rear screen ? works with the other two brake lights at same time when you press brake pedal with ignition on ? so may i suggest you check the other brake lights are working ? if not ? check these bulbs? reason being that from the symptoms you describe that high level light is staying on ? it would suggest that the brake light switch at the pedal is not operating ie not putting brake lights off when pedal is off and would suspect the brake lights have been on for some time and burned bulbs out due to the brakelight element in bulbs are high wattage if you check on what i have suggested? and is the case ? come back and will advise you how to adjust brake switch easy diy hope this helps? best wishes from the uk

Jan 01, 2010 | 2001 Toyota Camry

1 Answer

My brake lights won't glow brighter under braking?


sounds like the brake light switch on brake pedal has gone bad one way to check is find the switch it will have two wires pluged into the switch they can be dificult to get to they are located some where down low to the floor board on back of pedal find it and unplug the conector with a peice of wire or paper clip make a jumper between the two wires dont worry 12volts will not shock you but once jumper wire has been installed between the wires dont let it touch any metal parts or it will short out and blow fuse hope this helps

Oct 27, 2009 | 2000 Ford Focus

1 Answer

Ford galaxy 2004 -side brake lights not working


Check the fuse or the brake light switch.

May 23, 2009 | 2004 Ford GT

3 Answers

Brake light failure ford galaxy


take the wires off the switches on the pedal and touch together if the lights come on the switch is faulty

Oct 26, 2008 | 2000 Ford Escort

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

406 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...