Question about 2007 Honda Odyssey LX

Open Question

Second row seat won't go up

2nd row seat back is down and it won't go up. it is down and appears that lever to make it go up isn't attached to anything. it just dangles and I can't seem to take the cover off.

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 41 Answers

SOURCE: Remove seat from second row in Honda Mini Van 2007

on the passenger side feel under the seat and there is a lever that pulls toward you as you stand at the sliding door.

First, raise the armrest, then lower the back all the way forward. Then remove the headrest sit it out of the way and while pulling the lever under the seat towards you, lift up the seat from the back so it tilts forward. When it is standing on its "nose" lift first one side shifting it either forward or backwards to clear the rod on which it is hooked. Do the same with the other side of the seat and then lift it out. Installation is the reverse of removal.

The other seat is much the same, though sometimes the lever is a little different but in the same place.

Good luck,
bob

Posted on Jun 09, 2009

lazydave
  • 68 Answers

SOURCE: third row seat is down and strap is hidden

You should be able to reach under the seat and pull the metel bar under the seat

Posted on Jul 25, 2009

  • 6468 Answers

SOURCE: third row seat in 2000 honda odyssey van will not fold down

look for a broken cable

Posted on May 05, 2012

SOURCE: HONDA ACCORD Seats Front Assembly Recliner went down and won't go up

I wouldn't ruin anything by trying things yourself

I would have a dealer check it out

The dealer I used in the past, has a seat specialist come
in on Wed only, around 5:30 after the service bays close
& one service writer hangs out until that person fixes a
couple vehicles seat issues

Posted on Jun 12, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2003 chevrolet tahoe how do I fold The seat down


The second row is folded by first pulling up the rear of the seat cushion and folding up 'til it's behind the back of the front seat. Then the back of the seat folds down where the seat cushion was.

The third row seats have several levers that are numbered in the sequence they are to be operated. First fold the seat back down on to the cushion and then flip the whole seat up 'til it's vertical and latched.

This is described in the Owner's manual if you can find one.

Mar 15, 2015 | 2003 Chevrolet Tahoe

2 Answers

Ford Expedition seat won t fold down


My ford had same problem. I resolved it as follows:

on the side of the seat that has the cable handle that isn't working remove the INSIDE plastic covering. This will just pull off. This is thee plastic piece underneath the seat. Once this is done you have access to the lever that the cable pulls against. My was frozen stuck. I took a long screwdriver and placed it against the top of the lever and struck the end with a hammer. This unseized the lever. At this point the seat could be pulled up but pulling on cable. I then sprayed wd40 on lever joint.

May 21, 2013 | Ford Expedition Cars & Trucks

1 Answer

How to fold the 3rd row of seats in a 2000 durango


you need to pull the bottom section (****) up and forward flat. then the back rest just lays down. no levers.

Aug 06, 2012 | 2000 Dodge Durango

1 Answer

I can't find a latch, lever or anything to fold my 3rd row seat down on my 2003 GMC Envoy


you have to pull the part you sit on up and forward (to front of truck) then the backs will just fold down sams as trail blazer

Mar 02, 2012 | 2003 GMC Envoy

2 Answers

2004 3rd row rear seat won't fold down using lever


Cable is broken or stretched. pick up the bottom seat and see the cable end if broken or slack from being stretched pull that cable and then the back should fold down. Ibelieve you will need to remove seat to repair the cable. the bottom seat when lifted pulls on a cable that releases the backs lock to fold down

Jun 11, 2011 | 2004 Chevrolet Suburban

1 Answer

2006 Ford Explorer: Back seat won't fold flat to create flat cargo area. It folds down but not flush.


Okay so im just going to start from the seat being upright in a normal riding position.

1. You need to fold the head rests first. Pull the black tab under both headrests. They should spring into a folded position.

2. pull the side seat lever (on the door side of the seat). This will fold the top/back support down to an angle.

3. There is one more lever on the backside of this seat. Its in plain sight on the angled portion of your seat. Lift the big plastic lever.

4. While keeping the handle lifted, grasp the back of the seat and pull it torwards the front of the car. The seat should come unlocked and roll forward and down more towards the floor. If you have a bunch of junk on the floor, it obviously wont work. clear the path and the seat will fold completely flat.

Also, your drivers seat and front passenger seat cannot be all the way back, they need to come forward some in order for the second row seats' head rests to clear and fold flat.

Oct 02, 2010 | 2006 Ford Explorer

1 Answer

Remove seat from second row in Honda Mini Van 2007


on the passenger side feel under the seat and there is a lever that pulls toward you as you stand at the sliding door.

First, raise the armrest, then lower the back all the way forward. Then remove the headrest sit it out of the way and while pulling the lever under the seat towards you, lift up the seat from the back so it tilts forward. When it is standing on its "nose" lift first one side shifting it either forward or backwards to clear the rod on which it is hooked. Do the same with the other side of the seat and then lift it out. Installation is the reverse of removal.

The other seat is much the same, though sometimes the lever is a little different but in the same place.

Good luck,
bob

Jun 07, 2009 | 2006 Honda Odyssey

1 Answer

Lifting up whole 2nd row seats to access fuel filter


supposed to unlock with levers to fold back rest down,my 2000 nm has same prob I have to get large flat blade screwdriver or similarobject and get in back(stow rear dicky seat first)and lever the catches that lock base to floor not hard after you have done it once and seee how it works.hope this helps and works for you.

Apr 22, 2009 | Mitsubishi Passenger Cars & Trucks

2 Answers

I want to make my 1999 Mercury Villager Sport into a cargo loader, with just the front seats kept and the rest of the back empty. How do I remove the other 3 seats? So far, I can't get any of them to budge...


the middle seats come out easily. There are 2 handles you have to lift up on each of the bucket seats, they are in the front of the seat down by the seat tracks. After you lift them, tilt the seat upward in the front and rotate them backward. Then lift out of the hooks. Each seat is held down by 4 hoks.

The 3rd row seat is not designed to come out xcept by a technician. It does slide forward all the way up to the front seat. It has a sliding seat track.
First, lift the T handle under the seat cushion on the left front side of the seat. This will allow you to lift the seat bottom up all the way to lcok in the full up position.
Then, lift the lever on the same side of the seat and slide the seat forward. It will stop in 4 places.
Rear -Rear
6 inches forward of that.
another two ft to the second row seating position
full frward against the front seats.

Pleae rate as fixya if this helps.

c4253aa.gif Seat —Third Row Bench Removal
sxv~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Removal of the third row bench seat requires more than one technician.
  1. Remove the second row seats. For additional information, refer to Seat—Second Row .
  1. Remove the floor mats.
  1. Lock the seat cushion in the upright position.
    1. Lift the handle to release the cushion.
    1. Lock the seat cushion in the upright position.
0235766.gif
  1. Move the third row bench seat to the second row position.
    • Lift the seat track release handle.
  1. Remove the two bolt covers.
  1. Remove the two seat track front bolts.
  1. Remove the four seat track rear bolts.
    1. Position the rear seat cushion floor cover aside.
    1. Remove the four seat track rear bolts.
  1. Remove the third row bench seat.

Mar 02, 2009 | 1997 Mercury Villager

1 Answer

Removing the 2nd and 3rd row seats


3rd row, you simply pull the lever which makes the back fold down and then grip the handle located on the bottom and pull toward you slightly hard. They are heavy so it seems like they aren't coming out, just pull hard. second row, you flip all the way up and push with them standing up and they come unhooked. Good Luck! I didn't have any problems, except they are at least 50+lbs!

Nov 18, 2008 | 2007 GMC Yukon

Not finding what you are looking for?
2007 Honda Odyssey LX Logo

Related Topics:

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...