Question about 1999 Subaru Forester

3 Answers

How do I replace a rear window motor on a 1999 Subaru Forester? I need a diagram of the procedure.

Posted by on

  • yadayada
    yadayada May 11, 2010

    in order to get that kind of info u will need to buy a factory manual, try ebay for a used one or one on a disk..

×

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 80 Answers

First the door panel must be removed, once inside at the bottom of the door glass you will see it is attached to the regulator bar with to bolts, remove them separating the door glass from the regulator. (most of the time you must move the door glass up and down for the bolts to line up with an access hole so they can easily be removed...I assume your motor is shot and the bolts may be difficult to remove). the regulator has to be removed as the motor is attached to it. I'm not familiar with this one, but there is usually 3 or 4 bolts around the motor area and 2 bolts on the idler arm track, once removed the regulator should be free to wiggle out. remove the motor from the regulator.
How do I replace a rear window motor on a 1999 - 7cc62fb.jpg
Hope this helps.

Posted on Mar 12, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 337 Answers
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

If your going to start learning to fix some stuff on your own it would be wise to purchase a repair guide from chilton. You can get one at your local parts store.

Posted on Mar 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1999 Subaru Forester. I recently had the ac/heater blower motor replaced. It was only blowing on high so I replaced the resistor. Now it is blowing the fuses. Any suggestions??? Thanks


check that the wires for the motor are on correctly and that the loom has not jammed and cut when replacing the motor. There is a dead short in the wires after re-assembly of the system

Oct 06, 2014 | 1999 Subaru Forester

2 Answers

How do I replace a expansion valve on a 1999 Subaru Forester?


Greetings, I read your question and I think Reliable-Store can help you in this. Here's the site link.
1999 2002 Subaru Forester Service Repair Workshop Manual Download 1999...

Jun 29, 2014 | 1999 Subaru Forester

1 Answer

Firing diagram for a 1999 Subaru Forester


1999 Subaru Forester 2.5 liter DOHC F4

zjlimited_335.gif


Hope this helps (remember to rate this answr).

May 03, 2011 | 1999 Subaru Forester

1 Answer

I know where the sensor 2 is but where is the bank 1 for my 1999 subaru forrester code PO 141 O2 sensor heater bank1 sensor 2?


For 1999 Subaru Truck Forester AWD 2.5L MFI 4cyl the Oxygen Sensor is located under hood, center, rear engine area, mounted on catalytic converter.

zjlimited_1032.jpg

Fig. Oxygen sensor location-Forester 1998-2002 2.5L SOHC engine (click over image for zoom).

Generally, Bank 1 is front and Bank 2 is rear.

Hope helps.

Apr 14, 2011 | 1999 Subaru Forester

1 Answer

1999 Subaru Forester Where is fuse for electric


you may find the fuse diagram on the inside of the fuse box cover, try looking under the dash there might be another fuse box there.......hope this helps....cheers

Sep 13, 2010 | 1999 Subaru Forester

1 Answer

How to replace a 1999 subaru forester non-turbo


please my solutions i am All Data computer Erase.
key.

Apr 16, 2010 | 1999 Subaru Forester

1 Answer

Procedure for replacing rear wheel bearings 2000 Forester


i'm assuming you don't have a hubshark,this is a tool that will alllow you to remove the bearing while the knuckle is attached to the car,you may be able to rent this tool at a auto prts store .if not you need to remove the entie knuckle,first remove the trailing arm bolt,then the lateral link bolt{long and stubborn bolt},disassemble the brake shoes and parking brake cable,abs sensor if equipped the knuckle to strut bolt{no marking necessary they are not eccentric} then you need a to use or borrow a press to remove hub and bearings good luck

Mar 22, 2009 | 2000 Subaru Forester

1 Answer

1999 forester rear window washer does not spray water


The nozzle could be plugged, pull the hose off if you can get to it and see if you get anything. If you do, you can try and blow the clog back with the hose still off. good luck, Chuck

Mar 17, 2009 | 1999 Subaru Forester

Not finding what you are looking for?
1999 Subaru Forester Logo

304 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...