Question about 2006 Suzuki Reno

Open Question

Need to change the throttle body connector for suzuki forenza

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

shinehutt
  • 254 Answers

SOURCE: Where is throttle positioning sensor

Removal & Installation

  1. Disconnect the negative battery cable.
  2. Disconnect the Intake Air Temperature (IAT) sensor connector.
  3. Disconnect the breather hose from the valve cover.
  4. Remove the air intake tube.
  5. Disconnect the throttle cables by opening the throttle and moving the cable through the release slot.
  6. Disconnect the vacuum hoses from the throttle body.
  7. Disconnect the Throttle Position (TP) sensor and the idle air control valve connectors.
  8. Disconnect the coolant hoses from the throttle body.
  9. Remove the throttle body and discard the gasket.
  10. Remove the TP sensor.
  11. Remove the Idle Air Control (IAC) valve.
  12. Remove the throttle body retaining nuts.
  13. Remove the throttle body.

To install:

  1. Install the throttle body.
  2. Connect the TP sensor connector and the IAC valve connector.
  3. Connect the coolant hoses to the throttle body.
  4. Connect the vacuum hoses to the throttle body.
  5. Connect the throttle cable.
  6. Install the air intake tube.
  7. Connect the breather hose to the valve cover.
  8. Connect the IAT sensor connector.
  9. Connect the negative battery cable.
  10. Fill the cooling system
  11. shinehutt_33.gif
  12. i hope this helps tps is attatched to hrottle body on other side than throttle cable
  13. plz dont forget to vote rep[ly if you need more help

Posted on Jan 17, 2011

emissionwiz
  • 75077 Answers

SOURCE: need to replace tps on 06 forenza 2.0 4cyl

no just the Throttle Position sensor.

Posted on Nov 08, 2009

Testimonial: "less money..Saved money..Advice...On the money.Thaaaaaank you..."

duane_wong
  • 6826 Answers

SOURCE: 2004 suzuki verona unable to find exact throttle

Check out autozone.com or advanceautoparts.com to use as a reference.

Need to specify year, make, and model and engine size.

Posted on Nov 06, 2010

ftw1952
  • 10319 Answers

SOURCE: is the throttle position sensor

it is on the throttle body

Posted on Apr 23, 2011

  • 3640 Answers

SOURCE: where is the throttle position sensor on a 2007

on a 2006 it is on the throttle body at the throttle plate. There are actually three TPS sensors in this configuration. One attached to the gas pedal. One attached to the throtle body And, one located inside the top of the engine block. The defective TPS sensor is removable with four screws. American Suzuki has to be a pain in the *** by selling it only as part of the entire throttle body.

Posted on Sep 18, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Trouble code P0340 2006 Suzuki Forenza


It`s coming up the Camshaft position sensor.

Apr 21, 2014 | 2006 Suzuki Forenza

1 Answer

Iac valve location 2006 suzuki forenza


bd52f9f9-ef51-43bd-8b5b-0a753314a8c7.jpghere is a picture of the iac valve, it is on the throttle body, there are a few connectors on the throttle body and the iac is one and the shape is diffrent from the others so if you locate the connectors you will find it, here is a pic of the iac valve hope this is helpful.

Jun 29, 2013 | Cars & Trucks

2 Answers

Troubleshooting 2006 check engine light suzuki forenza


might the engine is sucking air or if it has a stepper motor and is not working.

Aug 23, 2012 | 2006 Suzuki Forenza

1 Answer

2006 suzuki forenza check engine light keeps coming on they can not fix it code P235 keeps coming on


check whether you have air sucked by the engine,or stepper motor if is fitted not working or dirty throttle body.

Aug 23, 2012 | 2006 Suzuki Forenza

1 Answer

Where is the throttle position sensor on a 2007 suzuki forenza


on a 2006 it is on the throttle body at the throttle plate. There are actually three TPS sensors in this configuration. One attached to the gas pedal. One attached to the throtle body And, one located inside the top of the engine block. The defective TPS sensor is removable with four screws. American Suzuki has to be a pain in the *** by selling it only as part of the entire throttle body.

Sep 18, 2011 | 2007 Suzuki Forenza Sedan

1 Answer

The check engine light came on and the dealer says I need a new throttle body. Unfortunatley this part is not under warranty. What will happen if I keep driving with out replacing the part. Is this a...


  • If you don't replace the throttle body, eventually, you will not have a response when you accelerate (press on the gas pedal) Soon, you won't be driving anywhere. You should replace it as soon as you can.

Regards, Tony

May 24, 2011 | 2008 Suzuki Forenza

2 Answers

Where is throttle positioning sensor on a suzuki forenza


Removal & Installation
  1. Disconnect the negative battery cable.
  2. Disconnect the Intake Air Temperature (IAT) sensor connector.
  3. Disconnect the breather hose from the valve cover.
  4. Remove the air intake tube.
  5. Disconnect the throttle cables by opening the throttle and moving the cable through the release slot.
  6. Disconnect the vacuum hoses from the throttle body.
  7. Disconnect the Throttle Position (TP) sensor and the idle air control valve connectors.
  8. Disconnect the coolant hoses from the throttle body.
  9. Remove the throttle body and discard the gasket.
  10. Remove the TP sensor.
  11. Remove the Idle Air Control (IAC) valve.
  12. Remove the throttle body retaining nuts.
  13. Remove the throttle body.

To install:

  1. Install the throttle body.
  2. Connect the TP sensor connector and the IAC valve connector.
  3. Connect the coolant hoses to the throttle body.
  4. Connect the vacuum hoses to the throttle body.
  5. Connect the throttle cable.
  6. Install the air intake tube.
  7. Connect the breather hose to the valve cover.
  8. Connect the IAT sensor connector.
  9. Connect the negative battery cable.
  10. Fill the cooling system
  11. shinehutt_33.gif
  12. i hope this helps tps is attatched to hrottle body on other side than throttle cable
  13. plz dont forget to vote rep[ly if you need more help

Jan 17, 2011 | 2006 Suzuki Forenza

3 Answers

How do i replace my TPS on a 2006 Suzuki Forenza?


2006 SUZUKI FORENZA RECALLS/DEFECTS & PROBLEMS Access the National Highway Traffic Safety database of 2006 SUZUKI FORENZA recalls and defects found on 2006 SUZUKI FORENZA automobiles. The National Highway Traffic Safety administration is authorized to order the 2006 SUZUKI FORENZA manufacturers to recall and repair vehicles or parts of motor vehicle equipment when its investigation indicates that they contain serious safety defects in their structure, or performance.
Check with your loacol suzuki for recall not sure on this part but it is a common problem
Good luck

Nov 29, 2010 | 2002 Mitsubishi Eclipse

3 Answers

2006 suzuki forenza tps tool


Go to a good auto parts store that has a tool catalog and look there or find a mobile tool dealer like Snap-on. Harbor freight catalogs also have them

Sep 10, 2009 | 2006 Suzuki Reno

Not finding what you are looking for?
2006 Suzuki Reno Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...