Question about 1985 Chevrolet S-10

2 Answers

Need location of ignition coil for a 1985 chevrolet S10 truck 2.5

Where is this coil located on the engine? This is a 1985 S-10 pick-up with a 4 cylinder 2.5 litre engine. Fuel Injected. 4 speed manual transmission.

Could this truck possibly have electronic ignition?

Reason for inquiry is I want to install a new Tachometer and have it all wired up except the GREEN wire that goes to the coil ? or does it go to the fuse box and if so where in the box?
E-MAIL ADDRESS: flash21@embarqmail.com.

Posted by on

  • flash21840 Mar 12, 2009

    Thanks so much for the help.

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 300 Answers

2.4L top of valve cover
3.0L back of intake manifold
3.3L, 3.8L passenger side of intake manifold. 

Posted on Mar 12, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 158 Answers

Hello, the green wire connects to the left wire on the distributor cap (Its probably not going to have a wire in this position), so you will need to put a connector on your green wire. The right wire is power to coil,and is going to be eiter red or purple.Please rate this answer thank you.

Posted on Mar 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Picture of distibuter wiring system for 1986 chevy s-10 pick up


Confirm us... Chevrolet Truck S10/T10 P/U

- Engine: 2.5 liter L4 VIN "E"
- Engine: 2.8 liter V-6 VIN "R"

Keep in touch.

Oct 20, 2011 | 1985 Chevrolet S-10

1 Answer

Awhere is #1 located on the distrbuter cap? for a 1985 Chevy S10 pick up


The S-10 pick up came with 3 different engines for that year. a 1.9, 2.5 and a 2.8. Here is what I have and I hope it helps. good luck. the engine size is the little tiny writing next to the diagram incase you don't see it at first. Kinda small.

1.9 clifford224_12.gif 2.5 clifford224_13.gif 2.8 clifford224_14.gif

Mar 01, 2011 | Chevrolet S 10 Cars & Trucks

2 Answers

Trying to locate the ignition module for chevy blazer s10 1994


Ignition module sits in the ignition distributor, remove distributor cap, there will be two elec. harness plugs, the one with two wire's is for the pick up coil, the other one is for the ignition module, just unscrew module out of distributor and install new one.

Sep 23, 2010 | 1994 Chevrolet S-10 Blazer

2 Answers

Ineedthefiringorder


1985 Chevrolet S10/T10 P/U 2.8 liter V-6

2a49b1c.gif

1985 Chevrolet S10/T10 P/U 2.5 liter L4

818a8ae.gif

Hope helps (remember to rate and comment this)

Sep 22, 2010 | 1985 Chevrolet S-10

1 Answer

Where is the map sensor located on 1985 s10 pickup 2.8 liter v6


it has one vacuum line to it and its half the size of a pack of cigarettes. Look around the intake area

Jan 09, 2010 | 1985 Chevrolet S-10

2 Answers

Where's the computer located on a 1985 chevy s10 pickup


Hi..my name is Keith..and the computer(ECM)..is an aluminum box located in the engine compartment..either mounted to a fender or on the firewall..i hope this helps

Jun 28, 2009 | 1985 Chevrolet S-10

1 Answer

No spark


MANY PROBLEMS WITH THE HALL EFFECT SENSOR AND IGNITION MODULE LOCATED IN THE DISTRIBUTOR......ALSO CHECK FOR POWER ON COIL....KEEP IN MIND THE COILS GO BAD ALOT ALSO

Jun 06, 2009 | 1985 Chevrolet S-10 Blazer

1 Answer

Need to locate the ignition control module in my 1985 fiero gt


Take off the distributor cap, it is held on by two screws and has three plugs, 1 to the pick up coil, one to the computer, and one to the ignition coil.

Mar 19, 2009 | 1985 Pontiac Fiero

1 Answer

All 3 firing orders for 2.8 chevrolet s10


not sure what u mean by 'all 3 firing orders'.Here are the firing orders for 4 and 6 cyl engines, and plug # locations.
4cyl. is 1-3-4-2 #1 being at the front of the engine
6cyl is 1-2-3-4-5-6 Front of engine Pass. side is #1, front of engine driver side is #2, back to pass side for #3, etc, Hope this answers your question, if not let me know and I'll help some more.

Jan 13, 2009 | 1994 Chevrolet S-10 Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

71288 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7009 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...