Question about 2000 Kia Sephia
I was driving my car came to stop sign and it started to die but didnt then it did that twice then on last time it finally stopped and died tried starting it again but all it did was crank and its fast not slow
The fuel pump may have died. Can you hear it turn on briefly, by turning the key to "on"? You may have to stand by the gas tank while someone turns the key to on. It should turn on for about 2 seconds and then stop, after pressurizing the fuel system. If you don't hear it, then check the fuel pump fuse. If the fuse is good, and the pump won't run, one needs to check that the fuel pump wire at the tank connector has battery voltage on it when the engine is cranking-then, you can assume the pump needs replacing.
If the pump is working and you have gas up to the engine, you would next check the ignition system. Start that by checking for spark on one of the spark plug wires.
Posted on Apr 21, 2013
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: CAR WILL NOT START
Plug an OBD II code reader in and you will most likely see that it has an issue with either the timing belt or the crank position sensor. either of these will cause you to stall/not start. If timing belt jumped teeth or knock sensor failed the car will either run rough or not start at all.
Posted on Nov 04, 2008
SOURCE: 2004 kia optima
Try the ignition switch,
For the Crank sensor there is a small metal disc that mounts behind the sensor if that is cracked or dammaged or installed backwards you will get same results as if it wasn't Make sure the timing marks line up on your timing belt. www.kiatechinfo.com
Posted on Jan 19, 2009
SOURCE: 2000 kia sportage ex, 4 cyl.
Many of the Kia sportages have a problem with the coils.
There are 2 coils for each 2 cyl and they are located under the middle platic cap on the valve cover.
These coils will set a check engine light that blinks when misfiring and stays on steady when the motor is running smooth. Autozone or Advance auto have a scanner that can check all engine functions and will show a problem with # 2 and 4 cyl.
The coil packs are $39.00 to replace but check the codes first
Posted on Feb 17, 2009
did you use aftermarket crank sensor? if so that might be your problem. dealer has several different ones, by providing vin number, but there is only one after market for all optimas 01-05. try to connect thick pink wire and thick orange wire together on the ignition failure sensor. you might have the same problem as me. good luck.
Posted on Jan 15, 2010
Tips for a great answer:
Jun 06, 2014 | 1995 Mazda 626
Apr 01, 2014 | Pontiac Sunfire Cars & Trucks
Apr 24, 2012 | 2001 Mitsubishi Montero Sport 4WD
Apr 18, 2012 | 2003 Ford Focus
May 07, 2009 | Saturn SL1 Cars & Trucks
Mar 16, 2017 | 1995 Honda Civic
Nov 11, 2008 | 1994 Oldsmobile 88
259 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: