Question about Ford Cars & Trucks

Open Question

Timing belt ford focus - Ford Cars & Trucks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 701 Answers

SOURCE: timing belt broke -2000 ford focus zx3

Hello mawbea: My name is Roger I will answer your question. You did not say which engine is in your car. So if you have a 2.0 SOHC engine. If the belt broke you should be Ok. If you have the 2.0 DOHC engine. The likely hood of bending the valves are just about a guarantee. How ever with any engine using a timing belt it is possible to bend a valve.Should you need more help please just ask.
Please rate the quality of your answer as this way we know you received helpful information.Thank You for using Fix Ya, Roger

Posted on Jul 08, 2009

subytech1
  • 244 Answers

SOURCE: Need info on a 2005 Ford Focus 2L TDCI

2005 Ford Focus L4-2.0L VIN N Hello your vehicle has a timing chain, you do not have to replace it ever... It was designed to last the life of the vehicle, unless you have a water pump, or a timing pulley or even a timing tensioner go bad, that is when you would service the timing chain. I added what your vehicle needs at it's 90,000mile service below, hope this helps... (subytech1)
blnk_spc.gif
Inspect Ball Joint
Brakes and Traction Control
Inspect brake pads, shoes, rotors, drums, brake lines & hoses, and parking brake system. Cooling System
Inspect cooling system and hoses. Exhaust System
Fluid - A/T (Except 4F50N & 4F27E)
Inspect automatic transmission fluid level on all other vehicles, if equipped with dipstick. Heat Shield, Exhaust
Steering and Suspension
Inspect steering linkage and suspension. Vehicle (Multi-Point Inspection)
Perform Multi-Point Inspection (Recommended by Ford) Refer to Routine Service. Wheel Bearing
Inspect wheel ends for endplay and noise. Replace Cabin Air Filter
Replace cabin air filter, if equipped. Engine Oil
Fluid - A/T (4F50N & 4F27E Only)
Change automatic transmission/transaxle fluid on all vehicles equipped with 4F50N & 4F27E. Inspect automatic transmission fluid level on all other vehicles, if equipped with dipstick. Fuel Filter
Oil Filter, Engine
Rotate Tires

Posted on Aug 07, 2009

Testimonial: "Thank you that really helped"

  • 21 Answers

SOURCE: Focus timing belt replacement.

This is a very very easy timing belt setup. first off you have to remove the valve cover. Then you have to remove the serp belt. Then remove anything thats in your way of the front cover. after you remove the crank pulley re-install the crank bolt. DO NOT LOSEN THE BOLT FOR THE TENSIONER!!!! now spin the crankshaft until the sproket aligns with the timing mark. now at this point the two camshafts should be aligned. now there is a special tool from ford that holds the cam shafts in place. all it is is a 1/4" peice of metal that goes on the left side of the cam shafts to hold them into place. if you mark the cams you wont need the tool. or if you can find something to fit in the left side of the cams that will work too. anyways after that its just the same steps in reverse. very easy to do.

Posted on Aug 31, 2009

BCAS1298
  • 3092 Answers

SOURCE: Does a 2004 ford focus have a timing belt or a

2.0L - timing belt
2.3L - timing chain

Posted on Dec 26, 2009

lindsay836
  • 677 Answers

SOURCE: Timing belt is broken. Interference or non interference motor?

Non-interference. How fast were you going when belt broke ? Please let me know if I can help with anything else.

Posted on Feb 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Timing belt ford focus 2007


make sure its a belt usually its a chain

May 18, 2014 | 2007 Ford Focus 1.6

1 Answer

2004 ford focus 16v zetec timing belt or timing chain?


Here there are 3 engines:

2.0 L. L4 DOHC >>>Timing Belt
2.0 L. L4 SOHC >>>Timing Belt
2.3 L. L4 DOHC >>>Timing Chain


Mai

Mar 29, 2013 | 2004 Ford Focus

1 Answer

Does my 2004 ford focus have a timing belt?


Both engines, 2.0 and 2.3 have timing belts.

Jul 20, 2012 | 2004 Ford Focus

1 Answer

Does my ford focus titanium have a timing belt or


This unit will be running a timing chain. Now,The 1.6 "diesel" engine has both a belt and chain. In the diesel edition, the belt runs from the crank shaft to the cam and the other cam is ran by the chain.

Apr 22, 2010 | 2007 Ford Focus (3 Door) Hatchback

1 Answer

Ford Focus belts


timing belt, and drive belt. the timing belt needs special tools to replace, if its a 2.0 DOHC VIN "P" 8th digit. if its a VIN "3" SOHC no special tools are needed

Oct 21, 2009 | 2001 Ford Focus

1 Answer

The timing belt on a ford focus 1.6cc on a 2004 plate


In the Timing Belt and Serpentine Belt calagogue dont have 1.6L, only for 2.0L and 2.4L; maybe this can help you.


2004 Ford Focus 4-Cyl. 2.0 L


Timing Component Kit; W/DOHC Eng.; W/1-Idler Pulley

00b2a20.jpg


Timing Component Kit; W/DOHC Eng.; W/2-Idler Pulleys

c721678.jpg


Timing Component Kit; W/SOHC Eng.

f3dd0be.jpg



I hope help you with this. Good luck.

Sep 15, 2009 | 2004 Ford Focus

1 Answer

Setting the timing


hope this helps- sounds like someone replaced your timing belt and when they replaced it, they were off by one a tooth or peg on the belt- buy a Haynes manual from Advance Auto parts or go to Advance Auto Parts and look for an OPENED 2003 Ford Focus Haynes. Read the part about installation of timing belts. You DO NOT have to remove the timing belt, just make certain it is correctly lined up with the proper marks. If you are a decent mechanic, you can do this yourself. Unlike cars in the 70's you cannot adjust the timing on today's Vehicles

Dec 14, 2008 | 2003 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...