On my 99 jeep cherokee my odometer reads 0. all my other gauges works and i checked to speed sensor and its fine. i guess my wiring is screwed so if anyone can give me the color wires going into the cluster for the "speed sensor" or spedometer that would be great thanks!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I'm assuming the engine is still running and no engine noise has occured due to loss of oil pressure, and it is just the gauge that is not reading? If so, the oil pressure switch that is located on the camshaft sensor, could have a bad connection or the oil sensor will need to be replaced. The oil sensor is located on the left side of the engine and is mounting horizontally on the camshaft sensor housing.
The problem sounds intermittent, if you put volt meter on the battery while it is at that 19volt mark/reading(on the gauge cluster) you will be able to see if it is true. If your alternator is really charging over 16volts the lights should be getting brighter then usual and/or they are burning out. Find out ASAP, if the alternator has a defective voltage regulator, it needs to be replaced. Prolong use will damage components.
pull out the instrument cluster
.check the soldering on the plugs.they are known for problems.the computer will generate a code if no feedback from the cluster.
tie them down with ties so it does not happen again.
it is from all the vibration