Question about 1998 Porsche Boxster
Warning light and battery light blinking
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
First place to look is behind the dash. Its unlikely to be the 'sensor', as its a cable driven speedo...this would suggest the dashboard panel is falling to bits...you may be able to pick up a scrap on from somewhere...
Posted on Jan 30, 2009
There are three buttons, let's call them 1, 2, and 3, from left to right.
A. 12 AM, PM or 24.00 h
With the clock in the time readout mode, keep
button (2) depressed for 4 seconds -12 AM, PM
or 24.00 flashing. After pushing button (1), either
a 12-hour (AM + PM) or a 24-hour setting
program can be selected. If you only want to
change the display mode, push button (3). The
clock then returns to its normal timekeeping
Push button (2) a second time - hour display
flashes. Set hour by pushing button (1). After
pushing button (3)*, the clock returns to the time
readout mode with new hour setting.
Push button (2) once more - minute display
flashes. Set minute by pushing button (1). Upon
pushing button (3)*, the clock is started -
accurate to within 1 second.
Stop watch function
The stop watch can only be set in motion if the
clock is in its normal timekeeping mode and not
during setting operations.
A. Push button (3) - 00:00 display appears;
B. Push button (1) - stop watch is on;
C. Push button (1) a second time - watch stops.
(Additional times can be added by pushing button
(1) again - stop watch keeps running. Push button
(1) once more to stop timing.)
D. Push button (2) - 00:00 display appears;
E. Push button (3) - normal timekeeping mode.
If button (3) is pushed during operation A and
B, the setting procedure must be restarted
(push button (2)).
Posted on May 02, 2009
check the abs pump fuse .the abs pump or a sensor could trigger it. get a scan done...the code will tyell you what is wrong
Posted on May 27, 2009
Find and remove the horn fuse or relay to keep the horn from blasting and attempt to start the vehicle. If it starts inspect the clearance between the horn switch and its ground contact. If there is a factory alarm, which I doubt, that has been reset by disconnecting the battery/battery going dead then call your local Porsche dealer for additional advice.
Posted on Oct 23, 2009
Tips for a great answer:
Jan 17, 2010 | 1984 Porsche 944
May 27, 2009 | 1987 Porsche 944
May 13, 2009 | 1984 Porsche 944
54 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: