Question about 1988 Chevrolet C1500

1 Answer

Signal lights stoped working - 1988 Chevrolet C1500

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 184 Answers

Did just one side stop working or both? Check the bulbs (front and rear). Check the signal relay (should be in the fusebox). Also look for any related fuses. One other thing is it could be the turn signal switch itself. Likely it's going to be one of those things. Start with the easy stuff - bulbs, fuse, relay. Good luck.

Posted on Mar 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn signals stoped working in my 1968 ford f100 and no break lights tail lights working fine put in new fuses


I suggest check flasher device, generally located underdash, back side of fuse panel.

Aug 10, 2012 | Ford F Cars & Trucks

1 Answer

Turn signals stoped working, fusses good break light go off when i turn on turn signal


Try chaning the relay or the turn signal switch itself. Hope it helps

Apr 02, 2012 | 1988 Ford F 150

1 Answer

My drivers side turn signal stoped working. I replaced the bulb and it worked for a few days then stoped again. I checked the bulb and it didnt blow. Also checked the fuses and all seem to be good. Tried a...


You are going to have to check wiring. Many it is the socket. If you have a test light or meter you can measure the voltage.

There are several turn signal lights, front, rear, side, etc. Do any of them work on the drivers side? if not then it may be the column switch. If only one light is out, then it will be wiring somewhere. Chasing wiring problems is as hard as chasing hydraulic problems, requires patience and starting at one end and continuing till you find the problem.

Good luck, Jim

Feb 23, 2011 | 2005 Saturn ION

1 Answer

My 1994 oldsmobile Achieva's turn signals stoped working


Have you checked the turn signal fuse? If it is good then i would replace the flasher.

Apr 11, 2010 | 1994 Oldsmobile Achieva Special Edition

1 Answer

I have no right side turn signals on my 02 gmc sierra fuses are ok. all my lights work fine. just stoped working


try the turn signal flasher or it could be the turn signal wire harness in the sterring column

Mar 04, 2010 | 2002 GMC Sierra 1500

1 Answer

My 1995 taillights stoped working but when i push on the brakes brake lights and turning signal lights come on at the same time no turninmg signal flashers will work replace the fuze was not the problem...


Hi, you might want to look at the earth connection at both tail lights. If the earth connection is faulty the other lights earth through the other circuits connected to the tail lights which will cause the brake lights and turning signal lights to come on at the same time. If the earth connections are fine it might be that you have a short circuit on one of the circuits going to the tail lights.

Jan 17, 2010 | 1995 Nissan Pathfinder

1 Answer

My signal lights,and break lights wont come on and


check all fuses first, if good then you have abad signal light switch, common problem.good luck.

Oct 23, 2009 | 1998 Pontiac Sunfire

1 Answer

Signal lights not working.


check the bulbs sounds like you poped a bulb.

Jan 06, 2009 | 2002 Pontiac Sunfire

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...