Question about 2001 Ford Explorer
Setting the clock
Press CLK to toggle between
listening frequencies and clock
mode while in radio mode.
To set the hour, press and hold the
CLK control and press the SEEK
Use arrow symbols to increase and decrease time
Posted on Mar 12, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jan 21, 2013 | 1993 Audi 100
ENTERING SECURITY CODE
Most vehicles are equipped with Heidelberg V or VI radios that are equipped with a theft protection program. When the battery has been is disconnected or if the radio has been removed, the radio will lock-up electronically and cannot be operated until the security code is entered. On the Heidelberg V, if the proper code is not entered in six attempts, the radio will lock-up permanently and cannot be repaired. On the Heidelberg VI, two incorrect attempts will lock the radio for about 1 hour.
The Heidelberg V may have a code assigned at the factory or a personal code created by the owner. The Hiedelberg VI has a code assigned at the factory and entered by the dealer during pre-delivery inspection. New radios come with the code printed on a sticker but not entered into memory. All codes are 4 digits. To code the radio:
Oct 15, 2012 | 1996 Volkswagen Golf
Nov 03, 2009 | 1999 Mercury Villager
Sep 07, 2009 | 1999 GMC Jimmy
Try this, put the key in the ignition and let it be on the first
turn right marked "ACC" or you can turn off the stereo and you will notice that
only the Digital Clock screen will show. Turn the Volume/Audio/Sel knob and press
on the "DISP" button simultaneously for about 4 seconds then release the "DISP"
button. The digital clock will start blinking, and then use the Tune/Seek
arrows pointing up and down to change the time. If the hour digit is blinking change
the hour and after you have changed it press "DISP" then the minute digit will
start to blink change it using the arrows, when you are done press "DISP" again
or leave the clock for between 4 to 8 seconds the clock will start working
I hope this works for you.
Apr 19, 2009 | 2004 Hyundai Santa Fe
Mar 05, 2009 | 1992 GMC Sonoma
Sep 19, 2008 | 2001 Audi S4
145 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: