Question about 1988 Dodge D-Series Pickups

Open Question

Where is the asd relay located on a 1988 dodge w 150

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 159 Answers

SOURCE: ASD location

Under the hood in the relay box beside the battery.

Posted on Jan 10, 2009

c17hydro
  • 2984 Answers

SOURCE: Where is the asd relay on my 1990 dakota?

ASD is in the engine compartment fuse block.

The pump relay should be there also. Check your fuse panel in the truck though.

Fuses, Relays & Circuit Breakers The fuse panel box is to the right of the glove box with the glove box door opened or beneath the instrument panel (dashboard) on 1989-93 models.

2d26fdd.gif
Pull out the fuse panel for access to the blade type fuses

Posted on Oct 18, 2009

Mechanic65
  • 142 Answers

SOURCE: 1991 dodge ram 150 asd relay location

There are 4 relays mounted on Drivers side fender under hood. Near hood hinge area. Counting from the front it should be the second relay. They are not always installed in the correct order. It should also be the smaller relay in size.

Posted on Oct 25, 2009

seanpwright
  • 2030 Answers

SOURCE: Car runs fine for 5 Sec then loses spark thru ASD

The inertia switch is in the rear of the car most times in the trunk area\

Posted on Jul 22, 2010

  • 1 Answer

SOURCE: 1990 dodge ram ASD

ubication fuel relay dodge dakota 1991

Posted on Jul 31, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 dodge ram SLT WHERE IS THE ASD RELAY SENSOR CODE T0688


ASD relay is located in the under hood relay box.

Aug 13, 2015 | Dodge Cars & Trucks

1 Answer

91 dodge ram 150 starts and quit some time starts and runs fine until i try to start it again dont matter cold or hot replaced fuel pump


There is a box under the hood next to the battery with fuses and relays.
there is a fuel pump relay and or Auto shut down relay that could be bad.
It shuts down the entire system ignition and or fuel pump.
ASD Relay.

May 21, 2011 | 1991 Dodge Ram 150

1 Answer

I don't get juice to my hv ignition coil on my dodge ram 150, 1992. This is intermittent problem. any ideas?


Do you have Voltage (there is no juice) to the ignition switch,distributor,fuel pump or coil.

NO---Check (ASD) Auto Shutdown Relay, in engine distribution box

Oct 21, 2010 | 1992 Dodge Ram 150 Club Cab

1 Answer

Car runs fine for 5 Sec then loses spark thru ASD


The inertia switch is in the rear of the car most times in the trunk area\

Jul 22, 2010 | 1997 Dodge Intrepid

1 Answer

1991 dodge ram 150 asd relay location


There are 4 relays mounted on Drivers side fender under hood. Near hood hinge area. Counting from the front it should be the second relay. They are not always installed in the correct order. It should also be the smaller relay in size.

Oct 25, 2009 | 1991 Dodge Ram 150

1 Answer

On 1996 dodge grand caravan code 42 from blinks from chedk engine light.


A code 42 is the Auto Shutdown Relay Control Circuit....The ASD relay is located under the hood in the Power Distribution Center next to the battery. Change the ASD relay, that should fix you up. If that doesn't work...you might have to check the PCM. But replacing the ASD relay should do it.

Bryon

Oct 11, 2009 | 1996 Dodge Caravan

2 Answers

92 dodge ram 150 5.2 this truck has no spark no injector pulse has no 8 volt computr to rank sensor, no ground b/y wire to asd relay.


TRY UNPLUGGING DISTRIBUTOR PICKUP CONNECTOR AND SEE IF 8V SUPPLY RETURNS..IF NOT,TRY UNPLUGGING VEHICLE SPEED SENSOR IN TRANS..THESE SHARE THE 8V SUPPLY CIRCUIT TO CRANK SENSOR ONE OF THEM MAY BE SHORTED..THERE IS NO GROUND TO ASD RELAY BECAUSE THE PCM MUST SEE CAM AND CRANK SIGNALS TO GROUND THE ASD RELAY..I HOPE THIS HELPS

Aug 22, 2009 | Dodge Pickup Cars & Trucks

1 Answer

Car starts then shuts down as if no power


In year /model 87, code 23 was oxygen sensor stuck in full rich position. I'd be tempted to try a new one.

May 03, 2009 | 1988 Dodge Daytona

1 Answer

1990 dodge ram ASD


ubication fuel relay dodge dakota 1991

Jan 10, 2009 | 1990 Dodge Shadow

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8201 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...