Question about 2002 Ford Escape

Open Question

Cargo cover 2002 ford escape - 2002 Ford Escape

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
fknstart
  • 404 Answers

SOURCE: removal of rear brake drum 2002 ford escape

make sure handbrake is off take wheel off hit the drum with a mallet not steel,as it will brake,hit on outter diametter face of drum, try and rotate as you twist off

Posted on Jan 05, 2009

Ad
  • 1218 Answers

SOURCE: Steps to remove radiator in 2002 Ford Escape?

http://www.autozone.com/autozone/repairinfo/common/repairInfoMain.jsp?leftNavPage=productsHowTo&partCode=0900c15280213faa&title=Radiator&targetPage=productInformation
Try this web site. It takes you to Auto Zone "How To" site. This one covers the 4 cylinder as you did not indicate the engine size.

Good luck and hope this helps.

Posted on Apr 20, 2009

chuck943
  • 783 Answers

SOURCE: ford escape 2002 firing order

V6 1-4-2-5-3-6 back bank pasenger side right to left cylinders 1 2 3
front bank passenger side right to left 4-5-6
4 cly 1-3-4-2

Posted on Jun 23, 2009

Zeevert
  • 373 Answers

SOURCE: 2002 ford escape tie rod squeaks

My outer tie rod did the same thing when just out of warranty. I could tell it was "bad" by putting my hand on the tie rod while someone else turned the steering a little and I could easily feel the vibration.
Check the other side to feel the difference. Tie rods don't cost that much, if you can replace it yourself, and take a chance on foregoing the wheel alignment. Maybe a $150? job at the shop.
In my case, a tie rod was not readily available. I verified that it was a good joint; no shake or rattle. Then I squirted a little WD40 inside the boot, and put it back together. 70,000 miles later, the new tie rod is still on my shelf waiting for the squeak to return.

Posted on Mar 17, 2010

Zeevert
  • 373 Answers

SOURCE: How do you replace the EGR on a 2002 ford escape?

To replace the the spark plugs on the V6, you'll need to remove the intake manifold. There is a coil on top of each plug (COP). Check this website for info:
http://www.escape-central.com/1forum/showthread.php?threadid=32550&referrerid=11756
The same link will also show the R&R of the EGR valve.

Posted on Mar 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace a 2002 ford escape thermostat


10F0526 2002 FORD ESCAPE 3.0 - YouTube

? 0:57
https://www.youtube.com/watch?v=L3uhu66ormo
Jul 8, 2010 - Uploaded by morrisonsauto
10F0526 2002 FORD ESCAPE 3.0. ... 2002 Ford ExplorerThermostat Housing Coolant Leak Repair Part 1 ...

Jan 11, 2016 | Ford Cars & Trucks

1 Answer

Locate fuse for abs brakes on 2002 ford winstar


The fuse must be in the main fuse box. The position and function of the fuses is normally marked on the inside of the fuse box cover and also in the owner's handbook. If you don't come right with these, work your way through the fuses looking for a blown one.

Feb 09, 2011 | 2002 Ford Windstar Cargo

1 Answer

I NEED THE FIRING ORDER FOR A 2002 FORD ESCAPE?


2002 Ford Escape 2.0 liter DOHC L4 VIN "B"

zjlimited_102.gif



2002 Ford Escape 3.0 liter V-6 VIN "1"

zjlimited_103.gif


Hope this helps (remember to rate this answer).

Jan 12, 2011 | 2002 Ford Escape

2 Answers

Cruise control ford escape 2002. ford escape


If the cruise lamp comes on and the cruise does not set i would advise inspecting the cruise cable and make certain it is not broken, if ok the the servo has likely failed.

May 29, 2010 | 2001 Ford Escape

1 Answer

NEED TO KNOW WHAT FUSE IS FOR THE RADIO ON THE FUSE BOX ON A FORD WINDSTAR 2002


Layout is printed on the reverse side of the cover panel you removed to access panel.

Sep 09, 2009 | 2002 Ford Windstar Cargo

1 Answer

Steps to remove radiator in 2002 Ford Escape?


http://www.autozone.com/autozone/repairinfo/common/repairInfoMain.jsp?leftNavPage=productsHowTo&partCode=0900c15280213faa&title=Radiator&targetPage=productInformation
Try this web site. It takes you to Auto Zone "How To" site. This one covers the 4 cylinder as you did not indicate the engine size.

Good luck and hope this helps.

Apr 20, 2009 | 2002 Ford Escape

1 Answer

Wiring diagram


Hello, If you go to google and look up wiring diagram there is a web site that gives you all of the diagrams.  Hope This helps (Please Take The Time To Rate Me)

Mar 15, 2009 | 2002 Ford Windstar Cargo

2 Answers

Removal of rear brake drum 2002 ford escape


make sure handbrake is off take wheel off hit the drum with a mallet not steel,as it will brake,hit on outter diametter face of drum, try and rotate as you twist off

Jan 05, 2009 | 2002 Ford Escape

1 Answer

Rear cargo door will not unlock


I had the same problem, mine turned out to be a burned out motor which after i replaced it fixed the problem. The locking mechanism is the black case located on the inside of the trunk window.

Nov 26, 2008 | 2002 Ford Escape

1 Answer

2002 FORD ESCAPE


Climb into the cargo area. The plastic panel is secured by 4 screws accessible only from the bottom edge of the hatch as well as about 10 clips. The object is to get your fingertips between the glass and the panel and pull inward (toward front of vehicle). The clips will pop loose if you pull hard enough. Once you have the panel pulled away, look for a whitish box with a plunger coming out the top of it. Move the plunger with your finger. I believe when locked, the plunger is out, and unlocked, the plunger is in. I believe you will find the solenoid coil has burned out and will need to be replaced. I can't believe Ford was so cheap to not include some sort of mechanical release like Chevy did on the Corvette hatch. I read this solution on another site yesterday and put it to the test tonight on my daughter-in-laws 2001 Escape, so I know it works. I don't think the later years are much different.

Aug 14, 2008 | 2002 Ford Escape

Not finding what you are looking for?
2002 Ford Escape Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77201 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

fordexpert

Level 3 Expert

5579 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...