Question about 1984 Pontiac 6000 Le

1 Answer

Loose tilt wheel on pontiac 6000 1984 - 1984 Pontiac 6000 Le

Posted by on

  • carhob May 11, 2010

    what is your question?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

You need to remove the steering wheel and the security lock plate, then basically rebuild by replacing any loose and/or damaged parts.
Its not for beginners.. but if you're patient and have moderate mechanical ability,, you can do it.

Posted on Mar 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to seat the steering wheel properly on a 1991 pontiac 6000 le


There are actually 4 bolts but in order to get them all you have to pull the tilt pins and the lower bowl.3 should have helped tho,Make sure the spring is under the lock plate and the snap ring is in the right spot.

Nov 11, 2014 | 1991 Pontiac 6000

1 Answer

How to repair loose tilt steering on a 2003 Pontiac Sunfire


the steering wheel needs to come off and the components behind it will have to be remove so you can see the tilt mechanism to know what needs to be done. sometimes its just a matter of tightening some fasteners that have come loose or replacing components. either way I suggest that you take it to a shop to have this done. if its not done correctly it can cause the air bag to deploy or it could cause and accident after its reassembled it if not done by someone that is qualified to do the job.

Jul 14, 2014 | 2003 Pontiac Sunfire

1 Answer

When I tilt the steering wheel down on my 2003 pontiac grand am the headlights go out


i expect its pulling the wiring loom/connector away from the switch very slightly, remove the cowling and see if there is any sort of cable tie/tape around the wires from light switch if so cut free carefully and tape back up LOOSELY so the wires can move with the tilt of the wheel

Apr 27, 2014 | Cars & Trucks

1 Answer

1989 chevy celebrity with adjustable steering and pulsating intermitant wipers etc. Steering wheel loose and rotates in 45 degree angle from side to side and up and down.


Well, first of all, the odds are the tilt section can be tightened back up without replacing anything. There are 3 bolts that get loose over time.
Second, if you really do need another column, any A body GM car built between 85 and 90 will work. That includes Pontiac 6000, Buick Century, and Olds Cutlass Cierra. The only real difference is the steering wheel which you would not have to change.

Sep 14, 2012 | Chevrolet Celebrity Cars & Trucks

1 Answer

Tilt steering wheel loose 1989 chev truck


Not a fun job sorry!
1) Remove horn button. 2) Remove steering wheel. 3) Remove turn signal/cruise lever and cancel cam. 4) Remove tilt pins with a pin puller(about $10) 5) Tighten the four loose screws that hold tilt mechanism to the column.
Be happy you do not have airbags.

Mar 08, 2011 | 1989 Chevrolet K1500

1 Answer

Loose steering column in 1989 pontiac bonneville, i took off the steering wheel but that's as far as i can go. my email is


Is it a tilt if so you have to go farther down the column so you can get to the 3 screws that tighten the upper collar so it will not be loose and wiggle if this is your problem. good luck

Mar 03, 2011 | 1989 Pontiac Bonneville

1 Answer

Back right wheel tilts inward. strut broke or bent?


It could be a damaged strut but if it hit a curb it would more likely tilt out. Some of those had an eccentric bolt that allowed adjustment of the camber. Have a tire shop look at it and determine if a bolt has come loose and allowed it to slip.

Jan 28, 2010 | 1995 Pontiac Grand Prix

3 Answers

1989 GMC Sierra 3500 loose tilt steering column


Watch videos on youtube ( repairing loose tilt wheel)

Jul 19, 2009 | GMC Sierra 1500 Cars & Trucks

1 Answer

Steering column is loose on 97 sunfire. How can i fix it?


You have a tilt steering wheel! This is a problem with most GM tilt wheels. There is 3 or 4 screws you need to have tightened up; which requires tearing down the steering to get to them and put lock tight on them and tighten them back up, so they will not happen again for a long time.

Dec 01, 2008 | 1997 Pontiac Sunfire

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...