Question about 1988 Ford Bronco II

Open Question

Bronco 2 transmission dipstick tube location

I got an 88 bronco 2, 5 spd manual xmsn, im assuming its the mistsubishi trans... where would the dipstick tube be located? I just dropped the trans and changed the slave cylinder and got it all bolted back up, but never saw a good spot where a dipstick tube could have been. There was a small hole with a rubber plug on the plate with my shisft stick that could have been it but im not really sure... any ideas?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 208 Answers

SOURCE: Removal of slave clutch master cylinder

The hydraulic cylinder is in the bell housing. When you separate the motor and tranny, you will see it as a unit with the throw-out bearing. Take the hydraulic line off before you start. You will have to bleed it when you are done.

Posted on Aug 13, 2008

Ad
mrhappyface
  • 205 Answers

SOURCE: engine sputtering

how long has it been since the air filter and fuel filter been changed ,oxygen sensor in good shape ,if its running rich from misfiring you will ruin the catalytic converter in a short time check for vacuum leaks if its only no 1 cylinder then focus there maybe bad injector only sure way to tell is inspect spark plugs they should look brownish gray color and dry

Posted on Mar 29, 2009

SOURCE: Bronco II: automatic Transmission slow to shift gears

replace the torque converter or try to get the transmission flushed first by a professional auto trans outfit

Posted on May 05, 2009

  • 68 Answers

SOURCE: I need to replace my 1993 ford escort GT's slave cylinder

just unbolt it and undo the pipe then refit the new one the sme way in reverse order

Posted on Aug 11, 2009

daltonp
  • 361 Answers

SOURCE: Where is transmission dipstick on 1995 ford f150

it should be on the left of the engine with a yellow handle

Posted on Apr 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the transmission oil pan located on a 95 ford probe??


it fills through the dipstick tube, with engine running,

Apr 13, 2014 | 1995 Ford Probe

1 Answer

When replacing a transmission do i need to fill the torque converter or will the pump prime the torque converter


The fliud will stay inside the torque converter mostly, After you re-installed the trans. add a few quarts, Start the car and while holding the brake switch the trans back and forth from DRIVE to REVERSE, then put in park, Check and fill the level to the full mark on the dipstick. through the dipstick tube using a transmission funnel,.. All while the vehicle is Warm/Hot and engine running

Mar 04, 2013 | 1989 Ford Bronco II

1 Answer

Where do I find the trans filler tube for my 94 ford aspire with 3 spd automatic? the trans seems to be not shifting properly.


The dipstick will be labeled "ATF" and is located on the passenger's side towards the front of the vehicle

Sep 18, 2012 | 1994 Ford Aspire

2 Answers

Where do I ad transmission floid ta a cad catera


These transmissions are sealed units and do not have a dipstick..there is a plug on the side of the transmission underneath for service, but you don't add anything if you don't have a leak. I have a 1998 Catera.

Jul 11, 2010 | 1998 Cadillac Catera

1 Answer

Wheres the transmission fluid plug located


I'm assuming this is an automatic transmission for which there will be no drain plug. If you're wishing to drain and refill the trans. you need to remove the trans oil pan and replace the filter and gasket(kit is about $20-30) and then get a funnel and refill through the trans dipstick tube. Start with 2 quarts, run and shift through all the gears and then check your lavel and fill as necesary by half quarts at a time.

Feb 22, 2010 | 1996 Ford Contour

1 Answer

I have an 1988 ford bronco 2 automatic V6 i pulled


There are shift solenoids in the transmission and apparently there's a problem them. I would get it to a trany shop and have it checked right away. If you continue to drive it you will ruin the transmission. Are sure you put the right computer in the vehicle? If you put a computer from a Bronco II with a manual trans in a vehicle with an automatic trans, the trans won't work right.

Jan 22, 2010 | 1988 Ford Bronco

2 Answers

Cannot locate trasmission dip on my 2003 expolorer where is it located


This transmission uses a mini-dipstick located on the passenger side of the transmission, toward the front of the trans, and just above the pan.

Good luck dear.

Dec 30, 2009 | 2003 Ford Explorer

2 Answers

Ware is the hole for the tranny fluid in a 2002 durango


Usually you just add transmission fluid through the dipstick tube, given its a automatic. Have the vehicle warmed up to operating tempature and check the trans fluid. Remove the trans dipstick and place a small funnel in the dipstick tubes opening. Add the neccessary amount of fluid and recheck. Be aware though that between adding fluid and checking the fluids, you need to allow enough time for the trans fluid to drain all the way down the dipstick tube or you will get a inaccurate reading.

Aug 24, 2009 | 2002 Dodge Durango

1 Answer

Transmission Dipstick


you have no dipstick in the manual trans. it's non-maintenance kinda system and its sealed.
unless it's leaking you don't need service.

Apr 10, 2009 | 2005 Nissan Altima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...