Question about 1992 Plymouth Voyager

1 Answer

1992 Plymouth Voyager valve adjustment - 1992 Plymouth Voyager

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Plymouth Master
  • 2,282 Answers

Your car has hydraulic valves, which means they are not adjustable.
If they are clattering, you may need to change the oil (If it is dirty) and run some cleaner through the motor.
What I mean is, add the cleaner to the fresh oil and filter you put in the motor.
50 years ago, we used to add a quart of automatic transmission fluid to the oil to clean the motor.
Automatic transmission fluid is basically colored detergent.
We would then drain the oil and transmission fluid when it got dirty, like maybe 500 or 1000 miles.
You do not want to put too much oil in the motor, so you would substitute the tranny fluid for the last quart of oil.
Be blessed.

Posted on Apr 21, 2013

6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 883 Answers

SOURCE: 1992 Plymouth Grand Voyager A/C Relay Location

rate me FIXYA!....thanks!

Posted on Jul 05, 2008

  • 1 Answer

SOURCE: 1992 plymouth voyager and my

I have a problem with my gas, speed, temperature gauges,,,,,,,don`t work,,,,,,,what I can do

Posted on Oct 23, 2008

  • 4669 Answers

SOURCE: my 1992 plymouth grand voyager wont shift out of first

Have the transmission computer scanned for codes. This trans is completely electroniclly shifted.

Posted on Mar 28, 2009

  • 2049 Answers

SOURCE: Need a diagram for a 1992 Plymouth Grand Voyager

Here's a link to both size motor diagrams...

V6 3.0L

V6 3.3L

If this helps, please post feedback. Thanks

Posted on Sep 21, 2009

  • 6826 Answers

SOURCE: overcharging alternator

This year it is not supposed to be in the computer,look on the firewall in the middle,I believe it is flat,and has a three wire connector,but only two wires in the plug,see if you can find it.

Posted on Feb 26, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

1992 Voyager 3.0L 3 speed at. doesnt shift into 1st at a stop light by itself & sometimes doesnt upshift like it should

Before any real damage is done, change the fluid and the filter. That. Is you best chance to get valve body to work properly.

Jan 14, 2015 | 1992 Plymouth Voyager

1 Answer

DEX/MERC okay for 1992 Plymouth Voyager?

I would not use it unless your owners manual specifys Dexron. I know on the Gen. 1 Voyagers ie.1984 to 1990 They required Mopar ATF+3 or transmission damage and failure was common if DEXRON was used.

Jul 05, 2012 | 1993 Plymouth Voyager

2 Answers

Where is the ecm module located 92 ply voyager 3.3l

The 1992 Plymouth Truck Voyager 4WD 3.3L MFI 6cyl the Engine Control Computer is located under hood, driver side, front side of strut tower, rear of headlight, mounted on inner fenderwell .

Hope this helps (remember to rate this answer).

Jun 13, 2011 | 1992 Plymouth Voyager

1 Answer

92 plymouth voyager 3.0 v6 plug order

cuando esta fria enciende un ratito y luego la apago y la vuelvo a encender se apaga, lo mismo pasa todas veces que la enciendo solo queda encendida si dejo mi pie en el acelerador lo quito y se apaga ese es el problema,es una plymouth voyager 1992 3.0

Jun 28, 2010 | 1992 Plymouth Voyager

2 Answers

Where is the gearbox located on a 1992 plymouth voyager

The gear box in your vehicle is a transaxle which houses the transmission and all final gearing.

Jun 01, 2010 | 1992 Plymouth Voyager

1 Answer

I have a 98 Plymouth voyager 3ltr can i replace that motor with a 92 Plymouth 3ltr

yes they should be the same you will have to swap some of sensors though also before you put the engine in you should replace the timing belt and water pump

Oct 14, 2009 | 1992 Plymouth Voyager

1 Answer

My 1992 plymouth grand voyager wont shift out of first

Have the transmission computer scanned for codes. This trans is completely electroniclly shifted.

Mar 28, 2009 | 1992 Plymouth Grand Voyager

1 Answer

Egr valve for plymouth voyager

I had rough idling,do not pass NOx emission?

Nov 29, 2008 | 1992 Plymouth Grand Voyager

Not finding what you are looking for?
1992 Plymouth Voyager Logo

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides