Question about Cars & Trucks

1 Answer

I have a 1996 acura where do you check the fuel pressure at

I need to know how do you check the 1996 acura for fuel pressure

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 44,283 Answers

Best place is at the fuel manifold fittings as that will tell you the pump pressure and the regulated pressure.

Posted on Apr 21, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
skayalgomas
  • 88 Answers

SOURCE: 1998 acura fuel pressure continues

it have a pressure regulator in a fuel rail, whats is the problem? I want to help you.

Posted on Jun 01, 2010

  • 60 Answers

SOURCE: 1999 acura tl 3.2 fuel pump pressure

between 2 and a half and 3 and a half bar

Posted on Apr 02, 2010

YellowNo5
  • 268 Answers

SOURCE: acura integra rs no spark no fuel pressure

Could be the main relay. It's behind the dash up above your gas pedal. Look for a gray and brownish box with one large plug in it. Should be easy to find since you don't have cruise control. It will be secured with one 10mm. You can bring it into reach with it still plugged in. Try starting it while tapping on the little plastic box. If it starts, pry off the cover with a flat head screwdriver and re-solder the broken connections. The break in the solder will be on the side with the sharp little things. It will be smaller than a hair. To find it you will need to wiggle it. Have plenty of light. Just hold the soldering tool on the broken one until the solder puddles around it and you're fixed.

Posted on Apr 29, 2010

  • 5 Answers

SOURCE: fuel pressure for a 89 Acura

Your fuel pressure should be 35-41 psi with your vacuum hose disconnected from pressure regulator and you can attach pressure gage at the bleeder vent on top of the fuel filter make sure your pressue gage is intended for fuel not air.

Posted on Jul 27, 2010

YellowNo5
  • 268 Answers

SOURCE: 1991 ACURA INTEGRA WONT START,

Bring the main relay from under the left side of the dash into view and tap it with a screwdriver while your trying to start the car. If this starts the car... then you can take the cover off of it and look really close for broken solder. Re-melt the solder and it will work. Don't be surprised if you replace it with another used one and it won't work, most all of these go bad eventually... had to fix many of them.

Posted on Jan 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How much fuel pressure for 91 acura


Acura legend says, 38--46 psi. I believe that spec is with fuel pressure regulator vac line disconnected and plugged. I'm not sure how you are checking fuel pressure? My info says there is a banjo bolt on fuel filter and a service plug in the top of banjo bolt. Usually after the vehicle sits over-night, not much pressure on the system, but, you still need to be aware. Place shop rags around service plug, slowly loosen service plug, then you may need a banjo bolt service adapter to screw in place of the plug so you can use fuel pressure gage.
If you have different model then I need to know model and engine size?

Apr 11, 2017 | Acura Cars & Trucks

1 Answer

1986 Acura Legend StickShift....I also have a problem starting my Vehicle when Car gets Hot....I've replaced Fuel Filter, Fuel Pressure Regulator, Fuel Pump is still Original, It has been Checked!


problem 100% is the pgmfi main relay . its up under drivers side lower dash,its a very common issue with Honda/Acura vehicles. Its dealership only part,inexpensive,fairly easy for a person even with minimal auto experience can do.let me know if you need picture of for you k

Apr 08, 2013 | 1986 Acura Legend

1 Answer

How to check fuel pressure on 1991 acura legend


There is a valve on the fuel pressure regulator that looks like a valve on a tire hook a fuel pressure gauge up and try to start your Acura

Sep 12, 2012 | 1991 Acura Legend

1 Answer

1996 acura tl will crank but won't start


There are many things that will cause a no start, you will need to check for spark and fuel pressure,

Aug 27, 2012 | 1996 Acura TL Series

1 Answer

Smoking from exaust runs too rich


Is the check engine light on ?
Have you checked the fuel pressure regulator for leaks ?
What was the fuel pressure at idle after you replaced the pump ?
You need to know this before you can proceed.

Aug 16, 2012 | 1991 Acura Integra Hatchback

1 Answer

I have a 96 Acura 2.5TL an a screw fell out of the center of my fuel pressure regulatior valve when I took the plastic cap off it. Can anyone tell me what that screw is for an can it be the reason my car...


That screw is probably the pressure regulator adjustment screw, this screw is to adjust fuel pressure. Regulating fuel pressure is very important in newer engines. Suggest going to shop good with fuel pressure problems. Not easy fix for a DIY.

May 22, 2012 | 1996 Acura TL Series

1 Answer

96 acura tl 2.5 rough idle after warm up with rpm swings ignition and fuel pressure good sparkplugs black and new codes; primary o2 heater circuit bad missfire cyl.5 random missfire


REPLACE DISTRIBUTOR CAP AND ROTOR REPLACE SPARK PLUGS AND WIRES IF NOT BEEN CHANGED IN LONG PERIOD OF TIME.CHECK IGNITION TIMING.CHANGE AIR FILTER CLEAN FUEL INJECTORS.IF ENGINE STILL MISFIRE IGNITION COIL IS WEAK OR YOU HAVE LOW CYLINDER COMPRESSION.

Jul 21, 2011 | 1996 Acura TL Series

1 Answer

How to replace cabin and fuel filters for 1996 acura 3.2 TL?


For the fuel filter:


Removal & Installation

Many Acura models are equipped with a theft deterrent audio system. Make sure you have the necessary code before disconnecting the battery.

  1. Disconnect the negative battery cable.
  2. Properly relieve the fuel system pressure, as outlined in Section 5 of this manual.

On 2.2L and 3.0L engines you may have to remove the engine wire harness bracket and power steering feed hose clamp.

  1. Wrap a shop towel around the fittings and, using a proper flare nut wrench, slowly loosen the fuel line fittings.


c17hydro_144.gif
  1. Remove the banjo bolts from the fuel lines.
  2. Remove the fuel filter clamp retaining bolt and the clamp.
  3. Remove the filter from the vehicle.

A through cleaning of the high pressure hoses is recommended before installation.

To install:

  1. Install the new filter and tighten the clamp mounting bolt to 7 ft. lbs. (10 Nm).
  2. Attach the banjo fittings with new washers in place.
  3. Tighten the banjo fitting bolts to 25 ft. lbs. (33 Nm).

On 2.2L and 3.0L engines you may have to reconnect the engine wire harness bracket and power steering feed hose clamp.

  1. Connect the negative battery cable, then start the engine and thoroughly check for leaks.
// // 0) preLoad.src = ctl00_cphLeft_chRepairTreeNav_tvTOC_ImageArray[i]; } ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.lastIndex = 35; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.populateLog = theForm.elements['ctl00_cphLeft_chRepairTreeNav_tvTOC_PopulateLog']; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.treeViewID = 'ctl00$cphLeft$chRepairTreeNav$tvTOC'; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.name = 'ctl00_cphLeft_chRepairTreeNav_tvTOC_Data'; //]]> var _strTreeScrollHidName = 'ctl00_hidTreeScrollPos';

Jan 23, 2011 | 1996 Acura TL Series

2 Answers

Fuel system


heres the location and test for the fuel pump relay these have a circuit board inside that cracks that is why you dont have fuel pressure in most cases. click here

Mar 28, 2009 | 1996 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...