Question about 1998 Chrysler Town & Country

Open Question

Flashing a/c and defrost button lights

The lights on the ac and defrost buttons constantly flashes, even after resetting the switches by holding the top and bottom wiper buttons. I get a solid row of lights, then I release those two buttons. The lights starts to reset only to have those two lights continue to blink.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
JigSaw007
  • 157 Answers

SOURCE: radio does not work

ok, there is a high possibiltiy u have a loose connection.
When it disconnects, it causes the time to go to 12:00

The power supplying ur radio is intermittent. You may have bounced on something while u was driving which caused the loose connection.

You may wanna have a look at the connections at the back of the radio and make sure the power is connected correctly

Hope this helps
Cheers

Posted on Aug 18, 2008

Ad
  • 1 Answer

SOURCE: flashing lights

Hi, had the same problem today. Solution: Start engine, blower on max, air direction to cabin, press rear wiper and rear wash buttons simulanteously for 5 seconds (all lights now on steady). Calibration test starts and lights flsh alternately. After first test, AC and recurculation lights flash for the cool down test. If all test pass then rear wiper light blinks slowly (press to exit self test). If AC and recurculation test fails then just 2 lights stay on. To repeat this part of the test press just AC and rear wash simulanteously ( may take several attempts and usually best when engine is cold). Again exit by pressing the rear wiper button once it is the only one flashing (slow blink).

This does work but it took me 15 minutes to finally switch them off!!!

Posted on Mar 12, 2009

  • 334 Answers

SOURCE: alarm red light stays on after you shut the car off 1998chrysler

most of the time you just hit lock and unlock and that will re set it . as for the light they bink most of the time ok.

Posted on Mar 29, 2009

csmock132
  • 4669 Answers

SOURCE: 96 Chrysler T&C Air Conditioner Code

You need to run it though cool down test. I'll look it up and repost.

Posted on Apr 28, 2009

  • 2 Answers

SOURCE: 2005 crossfire top wont go down

This can be caused by your trunk lid not being all the way shut .  But the most times this has happened to me the separator panel that lifts out toward you and latches to separate top from trunk space is not lifted into the latched position.. very frustrating till i figured it out.  Hope this helps helps.  

Posted on Jun 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace the water pump and now the lights on the button on the rear wiper are flashing did not do it be could it be a temstat or fuse


The blinking lights in the rear wiper rear defrost area can be reset by holding 2 buttons of the 3 on the left hand side. The top and bottom buttons. Turn the key on and hold them for about 10 sec and they should start flashing differently. Just let it do this. After they start flashing different. It will take 5 to 10 mins. Then one or more will quit flashing all together. If they don't after about 20 min reset them again it can take about 5 trys sometimes before they all go out.

Nov 21, 2010 | 1998 Dodge Caravan

3 Answers

What does it mean when the ac button lights are blinking the ac buttons-ac and circulating button lights blink continuously and you cannot shut them off at all this just began after the car wouldnt...


it is needing to be calibrated because of dead battery.i cant remember for sure but i think you had to push rear wiper and recirc buttons at the same time and hold them down a couple of seconds. engine has to be running and at normal operating temp. lights will flash and vents will change heat to cold etc. if it fails any test the lights will just keep blinking untill repaired and recalibrated.

Jun 24, 2010 | 1997 Dodge Grand Caravan

1 Answer

98 Dodge Caravan-why are the led lights on the AC control panel flashing?


The blinking lights in the rear wiper rear defrost area can be reset by holding 2 buttons of the 3 on the left hand side. The top and bottom buttons. Turn the key on and hold them for about 10 sec and they should start flashing differently. Just let it do this. After they start flashing different. It will take 5 to 10 mins. Then one or more will quit flashing all together. If they don't after about 20 min reset them again it can take about 5 trys sometimes before they all go out.

Feb 21, 2010 | 1998 Dodge Caravan

1 Answer

Yellow light flashing dodge caravan1998 reset afer 30 min rear wiper defrost ac


The blinking lights in the rear wiper rear defrost area can be reset by holding 2 buttons of the 3 on the left hand side. The top and bottom buttons. Turn the key on and hold them for about 10 sec and they should start flashing differently. Just let it do this. After they start flashing different. It will take 5 to 10 mins. Then one or more will quit flashing all together. If they don't after about 20 min reset them again it can take about 5 trys sometimes before they all go out. Good Luck

Nov 13, 2009 | 1998 Dodge Caravan

2 Answers

Lights flash on ac rec and rear wiper buttons. Put on new ac com


With my 1998 TC you have to start car turn to cold and fan on high. Tehn hold down the rear wiper and WASH buttons until the lights start flashing differently. Let it run through until only the rear wiper light is blinking. You should here it cycling through the different functions. When it is jsut the rear wiper blink press that button and the system is reset if there are no problems. A low voltafge problem had caused mine to act up.

Aug 05, 2009 | 1998 Chrysler Town & Country

2 Answers

Ac push button switch is flashing


disconnect a/c compressor connector and reconnect make sure the connector is tight....my van was doing the same thing and after i did that it works great no more flashing lights

Jun 27, 2009 | 1997 Dodge Caravan

1 Answer

Ac reset for e320


Your Climate control unit may have to be reset. The reset works as follows: With the key in the ignition and in posistion 2 push both the defrost button and the recirc button (at the same time) for five seconds or untill the led lights in those buttons begin to flash. Wait for 30 seconds or untill the led's stop flashing. Switch off the ignition. Check the evaporator temp sensor and pressure sensor for correct functionality.
Courtesy of benzworld.org/forums

Apr 16, 2009 | 2005 Mercedes-Benz Mercedes Benz E320 Cdi

1 Answer

Lights flashing on a/c and air recirulate buttons


Sounds like its gone into programming mode. All you need to do is start your van. (if you are unsure what knob or lever is which I am looking in the manual for proper terms) Then slide your temp lever all the way to the left (full cold). Then turn the Mode Control to 'panel' (the one that sends air to your face only). Then turn the 'blower switch' to all the way to full. Now go to the leftmost three buttons. Press the top one (rear wiper on constant) and the bottom one (rear wiper washer fluid). Hold these two for a few seconds. Once the lights come on solid then begin to flash you can let go. The AC will now calibrate. You will feel the air blow out of all the different zones at different intervals and see lights come on and go off. Then after a minute or two the top bottn you pressed will be slowly flashing. This means it has been completed (I actually let it run for 5 more minutes just in case something else started blinking). Press the last flashing button and you are done.

Mar 17, 2009 | 1997 Dodge Grand Caravan

1 Answer

Hi my 2003 honda pilot


to reset the the light , turn ignition switch to off position , press and hold the select/reset trip button , while holding the button turn ignition switch to the on position , with the engine off , continue to hold the reset button for about 10 seconds until indicator resets , your done.
you will see like 5 dashs blink then 4 then 3 then 2 then 1 then all flash . problem solved .

Jan 01, 2009 | 2003 Honda Pilot

Not finding what you are looking for?
1998 Chrysler Town & Country Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...