Question about 2005 Chrysler Pacifica

3 Answers

Chrysler Pacifica sways left & Right when highway driving

Repair shop says struts need to be replaced ($1,000). Is this possible?

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Chrysler Master
  • 813 Answers

I don't buy from his parts store 96 dollars each at Autozone Name Brand check Rock auto on the net

Posted on Dec 05, 2011

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Yoi know i ran in to this once i found the problem to be a broken dog bone at rear suspension cost 30$ i belive

Posted on Jul 14, 2015

  • chargerhp
    chargerhp Jul 14, 2015

    There are many so called dog bones on the rear suspension Camber Link
    Compression Link
    Spring Link
    Tension Link
    Toe Link

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 140 Answers

I WORK AT A PARTS STORE PART TIME, I CHECKED THE COST OF A PACIFICA STRUTS.. THEY ARE ABOUT $100 EACH.. SOME IF YOU ARE REPLACEING ALL FOUR STRUTS YES IT IS POSSIBLE.. BUT IF YOUR JUST REPLACEING THE FRONT STRUTS THATS ALITTLE HIGH.. THE FRONT STRUTS A YOUR PROBLEM SO ABOUT $550 IS WHAT YOU SHOULD BE PAYING.. HOPE I COULD BE OF SOME HELP..GOOD LUCK KEITH..

Posted on Mar 12, 2009

  • chargerhp
    chargerhp Jul 14, 2015

    There are only front struts on a Pacifica

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2000 Chrysler Concorde. Good Car. 145000 miles. Changes the struts last year and this year changes the bushings in the front wheel drive. The car is making a popping noise in the front end and...


could be cv joint but jack up wheels and move tire up down and left right up down if play check ball joints /anti-sway bar bushings--------if play left to right than check idler arms and steering system /and anti sway bar bushings

Dec 07, 2012 | 2000 Chrysler Concorde

1 Answer

Just had left/right struts replaced and now I hear this loud knocking noise (like something jumping around in the trunk) when I go over bumps or make a turn. What causes this?


Possible bushings (sway bar and suspension) if struts check out. Alot of times when you replace struts it amplifies existing worn bushings. Have struts rechecked and have bushings inspected.

Mar 02, 2011 | 1997 Oldsmobile Cutlass

6 Answers

I have a 2004 pacifica, fwd. I had just gotton my front brakes and rotors done, as well as all tie rods. I am still a wierd knocking noise in the front end (sounds like the right wheel well mostly) Almost...


In this order stabilizer links, stabilizer bar bushings, control arm bushings, engine cradle bushings or bad struts mine have 160,000 and don't clunk but do need replacement
9_23_2015_9_24_08_pm.jpg

Aug 11, 2010 | 2004 Chrysler Pacifica

1 Answer

2003 acura rsx strut noise . When I turn hard left or hit a bump, I occassionally hear a thud in the right wheel.


It could be a number of things; sway bar bushings or link ends, ball joints, tie rod ends, or strut mounts...as well as possibly a strut, but really the other things are more common to fail than the struts. Take the car to a couple of shops that do free front end checks and get some opinions. Most small independent shops will have a look for free in hopes of getting the job. Also, if you have custom wheels, try taking them off and go for a drive with the stock wheels. Often times, custom wheels have the wrong offset or are too wide and cause all kinds of problems.

Feb 03, 2010 | 1996 Acura TL Series

1 Answer

Clunk noise - right front wheel while going over slight bumps


It could be the sway bar bushing, sway bar end link bushings, or the strut mount bushing worn and needs to be replaced. Check with your local dealership to see if it's still under warranty or any recall issues with this problem. If your past the warrant, Auto Zone will have the parts and can give your the step by step instructions to have the bushing replaced with common tools. Good luck and hope this helps. 

Oct 26, 2009 | 2005 Chrysler Pacifica

1 Answer

2001 town and country sways to much


You most likely need new struts and shocks. especially in the rear. It is common. If it feels like this all the time including driving straight, then check that sway bar an ends aren't broken.

Sep 13, 2009 | 2001 Chrysler Town & Country

6 Answers

2002 chrysler mini van front end noisy .when you hit a bump.what


I had the same problem with my 2002 Town and Country Limited. I took it to the mechanic and had the sway bar links and ball joints replaced and still had the same clunking noise when going over bumps at low speeds. The van sounded great on the highway, but country roads were horrible. I was about to replace the struts and pay another 700 dollars when i read somewhere that the sway bar bushings could wear and cause the noise. I took it to the mechanic and he said absolutely not it would be a waste of money. Being the stubborn guy I am, I went to NAPA and bought the two bushings for 12 dollars and replaced them myself in an hour. I took the van for a test ride and the noise is completely gone. Please ignore your mechanic and replace the bushings ASAP! Pretty cheap try even if it doesn't work.

Nov 14, 2008 | 2002 Chrysler Town & Country

4 Answers

2000 Chrysler Sebring Conv. replaced struts-front end squeaks on brake and turn


the reason why ur car squeaks is the ball joint i have a chrysler and same thing happened n my friend knows a lil bit bout cars had the same prob with hiss car and then the tire came of came to find out it was the ball joint causing the squeaks its not bearings or ur brakes car places told me same thing didnt fix it it is 100 percent ur ball joint and when u ask for the part ask for a lower control arm with a ball joint and install it by whoever

Nov 06, 2008 | 2000 Chrysler Sebring

Not finding what you are looking for?
2005 Chrysler Pacifica Logo

419 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...