Question about 2005 Mini Cooper S

1 Answer

Will faulty dsc light cut power to engine

No compression in 2 cd cylinder new plugs wires coil light a triangle above dsc light is flashing and cant turn dsc on or off

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 71 Answers

You're going into limp mode. If you have no compression you most likely have a bad valve and the head will need to come off and have some new valves put in.

Posted on Dec 07, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

What am I doing wrong? Cylinder 2 misfire will not go away. Tried everything. Even stumped a mechanic.


have a compression test done and look for a moving valve seat insert
it gives the knock, misfire
as it is no 2 cylinder it is mechanical because you have moved the injectors and coils , plugs and leads and it stays at no 2 cylinder
If you want clean engine oil then change the synthetic oil out and put in diesel oil 20w40
It will not harm the engine as it is the same as petrol oil but with more additives than petrol oil
it is cheaper and has heavy detergent properties that keeps the engine internals clean
from the gunk in the sump ,it is clear that changing engine oil on a regular basis is something you don't do but if you want a reliable long lasting engine , it is must do number 1

Oct 22, 2015 | Cars & Trucks

1 Answer

2001 buick century P0304 step on gas engine light starts flashing


P0304 is engine misfire #4 cylinder Several things can cause a misfire #1 electrical which you have covered #2 Mechanical Test engine compression is should be around 150 cranking and 120 running . internal valve train components can cause bad compression and the valves then self. #3 fuel injector can be the cause suggest swapping with a know good cylinder and see if misfire follows injector.

Aug 19, 2014 | 2001 Buick Century

1 Answer

2003 blazer p301 code ive changed coil plugs check engen still flashing when accelerating


The flashing light means the problem is serious enough to damage the catalytic converter.
The code means cylinder 1 is not producing power. So it could be fuel, compression, or ignition related.

Feb 05, 2014 | Chevrolet Blazer Cars & Trucks

1 Answer

Kia sedona 2003 not firing on #3 cylinder


With the vehicle running remove the plug for the fuel injector for cylinder #3. RPM should drop. If you have access to nous lights plug one into the injector plug and make sure it flashes. If no flash either the wiring is open or grounded or the computer is not commanding it on and off. You should also look at the cylinder compression. Make sure plugs aren't cracked, are correctly gapped, and no carbon tracking.

Feb 27, 2013 | 2003 Kia Sedona

1 Answer

Check engine light flashing misfire on # 7 cyl


wat was the compression? if good try doing a leak down test on that cylinder n compare to other cylinders.

Jan 04, 2013 | 1997 GMC Yukon

1 Answer

01 a6, cyl 1 2 3 show misfire on obd2 scan above idle,plugs wires coil injectors fuelfilter o2sensors allgood


What is the code you are getting? Have you checked the engines compression and all cylinders are in good shape? Do that test and get back to me.

Jun 16, 2012 | 2001 Audi A6

1 Answer

Terraza P0303 Code. What's most likely cause? Injector, spark plug, wires or any of the above?


Might be dirty injector or burned valve. Check the connector on the injector. If good, run a compression test on all cylinders. If compression is significantly lower on #3, the head will have to come off. If compression is good, pull up the injector rail with injectors and wiring attached. Watch the injectors spray as someone cranks the engine.

Sep 02, 2017 | 2005 Buick Terraza

2 Answers

Code po304 car wont start


cylinder 4 misfire ,now if this is a GM product then i think you may need a reconditioned ECU init as if this is the 4 cyl engine and its same as the opel astra and zafiro and the vectra then its a common fault with a 2000 to 2004/5 model the computer is bolted to the engine inlet manifold and very weak and susceptable

Feb 06, 2012 | 1996 Saturn SL

1 Answer

Ford 2003 escape codes readed


Cauases or fault codes are not cut and dry, but here are the possible causes of codes P0316 and P0306 which are related codes.
P0316 - Engine Misfire Detected on Startup
Symptoms - Engine Light ON (or Service Engine Soon Warning Light)
- Engine fails to start
- Engine runs rough Possible causes - Crankshaft Position (CKP) sensor harness is open or shorted
- Crankshaft Position (CKP) sensor circuit poor electrical connection
- Faulty Crankshaft Position (CKP)
- Ignition System
- Fuel Injectors
- Running out of fuel
- Fuel Quality
- Faulty Engine Control Module (ECM) P0306 - Cylinder 6 Misfire Detected Symptoms - Engine Light ON (or Service Engine Soon Warning Light)
- Lack/loss of power
- Hard start
- Engine hesitation
Possible causes - Faulty spark plug 6
- Faulty ignition coil 6
- Ignition coil 6 harness is open or shorted
- Ignition coil 6 poor electrical connection
- Clogged or faulty fuel injector 6
- Injector 6 harness is open or shorted
- Injector 6 poor electrical connection
- Improper spark plug 6
- Insufficient cylinder 6 compression
- Incorrect fuel pressure
- Intake air leak

Jan 17, 2012 | Cars & Trucks

Not finding what you are looking for?
2005 Mini Cooper S Logo

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mini Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Mini Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...