Question about 1997 Chrysler Town & Country

2 Answers

I cannot start my 1997 chrysler town & country minivan. When I try to start it I get a "alarm set" reading. It starts for a minute then cuts off. HELP. I AM STRANDED.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have a 97 Chrysler Town & Country Van with 104000 miles on it. The past two months the van will not start and run after driving for a while. Let it set for about an hour and it will start and run fine. When it does not want to run it will start and run for about 5 seconds then quit. During this time the dash instruments will not display but the radio, windows, and lights work just fine. The battery was replaced with in the past month so I don' t think that is the problem. Any seggestions?

Posted on Aug 01, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,392 Answers

You need to get the correct key programmed to the van. It thinks you are trying to steal it. May have lost its program somewhere, or problem with the vans anti theft itself.

Posted on Mar 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need diagram for juntion box


Thread: fuse box?? - The Chrysler Minivan Fan Club Forums

forum.chryslerminivan.net/showthread.php/21174-fuse-box

Jun 26, 2011 - 10 posts - ‎3 authors
Does anyone have a diagram for the fuse box (junction box) that is inside on the drivers side for a 1998 Town and Country. I need to know what the relays are for, my manual only shows the fuses and there is ... Forum · The Minivan Mopar Garage · 3rd Generation Chrysler Minivans: 1996-2000; fuse box?Missing: juntion

Interior Fuse Box Location: 1996-2000 Chrysler Town and ...

www.carcarekiosk.com/video/2000_Chrysler_Town_and.../replace
Interior Fuse Box Location: 1996-2000 Chrysler Town and Country ... box of your 2000Chrysler Town and Country in addition to the fuse panel diagram location. ... If youneed to replace a blown fuse in your Town and Country, make sure you ...Missing: juntion

Dec 21, 2015 | 1996 Chrysler Town & Country

1 Answer

1997 chrysler town and country alarm a 1997 chrysler town and country alarm systemhow do I disconnect a 1997 chrysler town and country alarm system


You can't. You can't . you can't ... Have the codes read and find the problem. Fix it. Could be just a bad key.

Feb 19, 2015 | Chrysler Cars & Trucks

1 Answer

2007 town and country minivan. I left the key partially turned in the ignition overnight. Today I have a dead battery and a clicking noise coming from the fuse box next to it


YOU WILL HAVE TO ETHER JUMP START OR BATTERY CHARGER THE SECURITY ALARM WANTS TO TAKE OVER AS SOON AS ITS GETS POWER THAT'S WHAT YOU HERE
HOPE THIS HELPS YOU GOOD LUCK BOB

Apr 25, 2011 | 2007 Chrysler Town & Country LX New Cars

1 Answer

My 1997 Chrysler Town and Country Minivan starts but wont move


can you put it in gear if so u might want to check the cable that connects to the transmission if that does not work u might need a new transmission

Mar 23, 2011 | 1996 Chrysler Town & Country

2 Answers

Van will not start . It will not turn over when I try to start it. It is like it is not getting any gas.


1997 town and country alarm is shuting van down how do i disconnect it???????????

May 08, 2010 | 1997 Chrysler Town & Country

1 Answer

1997 chrysler town & country was cutting out,died,now wont start


you need to put a scanner on it and see what code comes up.
my guess would be the crank sensor which is very common .

Feb 12, 2010 | 1997 Chrysler Town & Country

1 Answer

WHEN I SET MY ALARM IN MY 1997 TOWN and COUNTRY IT WONT UNSET AND I CANT START MY CAR, I TRIED THE LOCK THEN UNLOCK WITH THE KEY BUT NO LUCK SHUTS RIGHT OFF, CAN I OVERIDE OR MANUALLEY RESET MYSELF


TRY PUTTING NEW BATTERIES IN YOU FOB[REMOTE].IF THAT DOES'NT WORK YOU WILL HAVE TO GET A NEW OR USE YOUR SPARE IF YOU HAVE ONE,IT CAN'T BE OVERRODE.

Oct 12, 2009 | 1997 Chrysler Town & Country

1 Answer

My car alarm will not reset and the issue with problems below


If you (hopefully) have the key fob (keyless entry remote), try closing the doors, then lock and unlock using the keyless entry. This should reset the security so the vehicle will start.

Jul 04, 2009 | 1998 Chrysler Town & Country

1 Answer

Won't start, will try to turn over but just won't crank


check your battery cables same problem on dodge dacota

Mar 28, 2009 | 2003 Chrysler Town & Country

Not finding what you are looking for?
1997 Chrysler Town & Country Logo

636 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...