Question about 2005 Chrysler Pacifica Touring
Car won't start, service immobilizer light is on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Perform Service Light comes on
This is a setting that can be reset to 2000 miles - when it counts down to 0 you get the "Perform Service" alert. I believe if you use the Step function you will see "XX miles to Service" Use the reset button to set this back to 2000.
Posted on Mar 08, 2009
SOURCE: 2004 chrysler pacifica
It is for an oil change mainly and any other service your maintenance manual suggests at the mileage interval. It needs to be reset after each oil change to be accurate.
Posted on Jun 05, 2009
Most likely it means that the mechanic didn't bother to reset the service interval after changing the oil.
You can do this yourself by hitting the Step button until you see 0 miles until Service displayed, then hold the reset button until it changes to 3000 miles.
Posted on Aug 16, 2009
There are some possibilities which you
will have to check in this case:--
1) First of all check the power and voltage to the battery. With meter it will show exact 12 volt if the battery is charged. If the voltage is less get the battery charged at local auto repair shop. If the battery is internally drained and not getting charged then its time to replace the battery.
2) When you crank the car do you see spark coming at the spark plug? If no then its time to check the spark plugs and coil pack. If the spark plugs are not worn out and looks new then its time to check coil pack. The spark plug gets power to spark from coil pack.
3) The other thing to check in this case is the starter solenoid of the car. If the battery is charged and you start the car then it gives power to the starter to start the car. But if starter is faulty or not connected properly then car will not start.
4) The other thing to check in this case is fuel in the car. If there is fuel in the car then check the blockages in the fuel pump if the fuel pump looks proper then check the fuel filter above the fuel pump.
5) If all the above possibilities mentioned above checked out OK/perfect then it’s a electrical issue and the wiring's in the car needs to be checked. The car gets power from the battery to get started. so the wires from battery needs to be checked one by one.
Thanks. keep updated for any more query.you can rate this solution and show your appreciation.
Posted on Jul 31, 2010
Make sure that your tire pressure sensors were not damaged. one simple way to check what tire sensor is causing the problem is to lower each tire individually and check to see if the message displays to a different tire or more than 1, depending on the TPM system your pacifica has. Chrysler has a TPM (tire pressure monitor) tester which can check each individual sensor for correct operation. and the sensor's batteries have typically a 5-7 year life span.
Posted on Feb 19, 2011
Tips for a great answer:
Feb 19, 2015 | 2007 Chrysler Pacifica
Dec 30, 2014 | 2004 Chrysler Pacifica
Dec 16, 2012 | 2006 Chrysler Pacifica
Dec 16, 2012 | Cars & Trucks
Jun 23, 2012 | 2004 Chrysler Pacifica
May 03, 2012 | 2006 Chrysler Pacifica
Oct 12, 2010 | 2004 Chrysler Pacifica
Jan 02, 2010 | 2004 Chrysler Pacifica
227 people viewed this question
Usually answered in minutes!