Question about 1993 Honda Civic 4 Door

1 Answer

1993 honda civic lx driver power window alinement

As far as i can tell the motor and regulator are fine. yet at 1/2-3/4 of the way up the window binds and then proceeds to come out of alinement. iv tried installing the window in an up position and all the way down...

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

MY CIVIC HAD THIS PROBLEM IT WAS IN THE TAC RUBBER AND BABY OIL TO THE RUBBER AND CANGE THE ROLLORS ON THE TRAC ALL MINE HAD TO BE CHANGED AND CHECK THE PLASTIC ON THE BOTTON OF THE GLASS IF BROKEN U CAN BUY THEM AT NAPA

Posted on Jul 03, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

06 honda civic lx window problem


this is covered in the FSM, buyone
or look at alldata.com under windows.
that's funny you need windows to see and fix windows in car, LOL

Jun 16, 2013 | 2006 Honda Civic Hybrid

1 Answer

One by one, all power windows stopped working in my 96 honda civic lx. How do you determine if it is a fuse, regulator???


If all the power windows stopped working it is most likely the fuse. There could be 2 fuses actually. One under the dash in the interior fuse panel and 1 under the hood in the fuse box normally located next to the battery or air filter box. Check all fuses and you should find the problem.

Aug 15, 2010 | 1996 Honda Civic

1 Answer

95 riviera drivers window wont go down


Could be a couple of things: the first two apply ONLY to POWER WINDOWS:
1-window switch went bad (not common but it happens)
2-window motor only works one direction (even more rare, but still has happened)
3-window regulator defective(power windows-maybe broken cable or mechanism; manual crank window regulator-broken mechanism.

If you have power windows:
Do you hear the motor running or binding when trying to roll window down? bad regulator
No noise? switch or motor

You need to remove your door panel to see and access the interior operating components. When you get that far you'll most likely see something obviously broken.

Then you'll need to examine the regulator and see if it has a broken cable or other binding parts.

Not a big deal to replace the window motor or regulator, but requires a little patience and manual dexterity.

Hope this helps.

Mar 18, 2010 | 1995 Buick Riviera

1 Answer

Stuck crank window, drivers side, 97 honda civic


1996-00 Civic 2-doors had a problem with the front windows binding or coming out of the run channel. The window regulator needs replaced and the rubber run channel needs inspected for damage and to make sure its properly seated into the window channels. note: make sure you install the window crank in the 10 o'clock position, so your not tempted to use the window crank as a door handle to pull the door shut. This can break the crank and/or the regulator. -Hope this helps:)

Jan 24, 2010 | 1997 Honda Civic

3 Answers

The drivers side window stoped working on my 2004 silverado the passenger side works fine


Try the fuse. The switch may be faulty so check by removing the inner door panel and connecting a 12v battery via two wires to the motor that winds the window up and down. If it goes up and down it's probably the switch which may just need a clean on the terminals.

Nov 01, 2009 | 2002 Chevrolet Silverado 2500HD

1 Answer

96 Civic power window, driver's side


before replaceing check voltage from switch to regulator then to motor that will tell you which component is bad when you find that out look at the mounting styl off the failed component mos are held in with clips or rivets if they are riveted in you will have to drill them out

Jun 03, 2009 | 1996 Honda Civic

1 Answer

Front Driver side power window stopped working.


your window motor is broke. or bad wireing in switch. most likely motor though.

May 04, 2009 | 1992 Honda Civic

1 Answer

Driver's side window regulator


I just replaced the regulator in my mother's 98 civic ex and didnt need any special tools. I do recommend replacing the glass run channels on either side of the window. I have replaced the regulator twice and it is still having problems as I haven't replaced the run channels. If not replaced very soon I can see myself replacing the regulator...yet again!

Aug 04, 2008 | 1998 Honda Civic

Not finding what you are looking for?
1993 Honda Civic 4 Door Logo

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...