Question about 2007 Hyundai Getz 1.5

Open Question

How do I remove the washer nozzle for 07 Hyundai Getz

The drivers side nozzle seems to be blocked. I have tried to clean it with a pin - cleaning the three jets and also removing the pipe under the bonnet and trying the same thing. I swapped the pipes for the left and right nozzles over, and the drivers side is still squirting a weak jet of water. Therefore I want to remove the nozzle to give it a good clean. How do I do this? I can't find any instructions online. Thanks,

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

ghost4548
  • 776 Answers

SOURCE: hyundai getz radio

Here's a pic

5781d0b.jpg
Pops out, then remove 4 screws which mount the audio & instrument panel.7be2186.jpg

Posted on Jun 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove clogged windshield sprayer on 08 tundra


Normally it can be dirt that accumulates on the nozzle end and all that is needed is a thin sewing needle or a office pin to clear the nozzle while the washer is pressed to work. If there is no action you can also use a thin wire to be pushed into to clear off the dirt.Use a cleaning spray into the nozzle to remove any other dirt.

Mar 14, 2012 | Cars & Trucks

1 Answer

Windshield Washer nozzles


try removing the hose at the nozzles and use compressed air and a blower nozzle to blow back out the blockage from the nozzle opening

May 05, 2017 | 2001 Isuzu Rodeo

1 Answer

Windshield washer is working, but a weak spray.


1) Nozzle could be partially blocked, try cleaning out with a pin.
2) Pipe from pump to nozzle could be partially blocked or have a hole/split in it.
See if you can detach and blow down it, if clear, is there water from the washer bottle leaking in and odd place.
3) The pump could be partially blocked, needs taking out and cleaning, could try flush with clean water first.

Sep 03, 2011 | 2000 Dodge Caravan

1 Answer

Blocked pump for window wash , no water coming through onto windscreen.can i clear this myself? or does it need to go to garage?.


If the pump runs then the nozzles are blocked. Use a pin or needle to clear the blockage from the nozzle.(Stick it in the little hole pointed at the windscreen.) Be careful not to break the pin off in the nozzle.
See if you are able to pull the pipes off from the underside of the nozzles. Clear the nozzle using the pin. Then point the pipe into the underside of the nozzle and activate the washer in order to rinse the nozzle.

Aug 02, 2010 | 2002 Hyundai Santa Fe

3 Answers

LEFT(DRIVER SIDE)WASHER SPRAYER NOT WORKING. WHAT


The sprayer nozzle is clogged, first try cleaning it with a very thin pin, if still it doesn't work, you can install a new one, all you need to do is press the side clips of the sprinkler ( under the hood ) and it easily pops up and pull it out ( top of the hood ).

Feb 08, 2010 | 1999 GMC Suburban

2 Answers

Windscreen washers not operating on HYUNDAI COUPE


put the nozzles in hot water then poke each side with a pin/Please rate my response thank you very much

Feb 02, 2009 | 1998 Hyundai Elantra

2 Answers

2000 Hyundai Accent


Try removing the plastic panel underneath/forward of the RH wheel arch, the washer bottle is there, remove the pump by pulling straight out of the bottle. There is a plug and two hoses connected to the pump. You will probably find the mesh filter is clogged, clean and try it. Some washer pumps have a valve on the side where the hoses connect, do not try to dismantle this,

Jul 05, 2008 | 2000 Hyundai Accent

Not finding what you are looking for?
2007 Hyundai Getz 1.5 Logo

Related Topics:

250 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...