Question about 1992 Chevrolet S-10

Open Question

S10 pcv valve - 1992 Chevrolet S-10

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Why is their water in my oil

Or a head gasket or a cracked block, etc. You need to take the vehicle into the shop and have a pro diagnose the problem

Feb 10, 2015 | Cars & Trucks

1 Answer

I have a 2.8 v6 92 s10. The motor cranks but won't fire. I have replaced the o2 sensor, pcv valve, tps, iac valve, cap, rotor, plugs, wires, fuel pump filter and sending unit, rebuilt fuel pressure...

check for spark first,either with a spark test light or the old fashion method- screwdriver held close to metal,if no spark- distributer could be the culprit

Oct 23, 2014 | 1992 Chevrolet S-10

1 Answer

How to replace PCV valve on 1999 S10 blazer

If the engine in question is the 4.3l Vortec motor, the pcv valve is located on the driver's side valve cover, near the center. If it is the 2.2l motor, it is also located on the main valve cover, near the front of the cylinder head.

Mar 12, 2011 | Chevrolet Blazer Cars & Trucks

1 Answer

Location of PCV valve 2002 S10 V6

driver side valve cover on the rear half

Apr 10, 2010 | 2002 Chevrolet S-10

1 Answer

Where is the pcv valve on a 2002 chevy s10 extreme v6 4.3l

PCV valve is round and screws into the intake manifold. It can be identified by the hose coming out of the top of it going to the valve rocker cover. When you unscrew it be sure to not lose the "O" ring.

Mar 04, 2010 | 2002 Chevrolet S-10

1 Answer

Where does the pcv valve go in 1997 s10 pickup

Under the hood on driver's side, upper engine area, mounted on valve cover. Hope this helped and best wishes.

Jul 30, 2009 | 1997 Chevrolet S-10 Pickup

1 Answer

1991 S10 2.5L throttle body idles to fast

A vehicle that old will suffer from brittle and cracked vacuum lines. I would say there is a bad, or several bad lines leaking away vacuum from the intake manifold. Don't forget to check the hose going to the PCV on the valve cover. A vacuum leak will also cause the engine to stumble and miss intermittently when idling.

Jun 26, 2009 | 1991 Chevrolet S-10

1 Answer

Pcv location on 2002 s10

it is a tube connected to the valve cover. So there really isn't a valve.

May 15, 2009 | 2002 Chevrolet S-10

Not finding what you are looking for?
1992 Chevrolet S-10 Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides