Question about Nissan Cars & Trucks

Open Question

Nissan urvan 1983, 2 litre carby engine.. backfiring through carb does it just need to be tuned how do i do this?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 375 Answers

SOURCE: GMC Vandura 1983 6.2 litre diesel automatic transmission oil GMC Vandura 1983 6.2 litre diesel automatic

Your dip stick tube is your fill tube for your transmission . Make sure your transmission oil is at opperating temp before servicing some instructions are written on the dip stick , Use a small funnel , Add a little at a time (cup). Use the proper fluid , check regularly

Posted on May 18, 2008

Ad
  • 19 Answers

SOURCE: Bogs and backfires

What have you done so far? Does your van have electronic ignition or points? If the latter i'd check/replace points, capacitor & white, low tension wire inside distributor. Also check the spark plugs (all four should have the same grey/brown colour) & H.T. lead resistance, especially if the fault occurs under load/acceleration.

Posted on Jun 27, 2008

  • 1 Answer

SOURCE: 1983 camaro 6c auto

try tightening the bolts that hold the carb to the engine; very common vacuum leak location.

Posted on Mar 30, 2009

  • 67 Answers

SOURCE: 1984 urvan diesel wont start

you have a bad glow plug relay. yes its that simple!! hope this helps you !!!!

Posted on May 30, 2009

  • 14 Answers

SOURCE: ''06 nissan urvan odometer doesn't work Everything else does.

You may need to replace one of your speed sensors. My best bet: have an expert run a computerized report for you. Autozone as a simple one for free. They will let you know in 1 to 2 minutes which one of your sensors has failed. New sensor carries most of the times a 2 year warranty.

Posted on Sep 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Advise on replacing or getting carburetor for my car.suzuki vitara 1992 manual with carby 2 door soft top


welcome to USA forum
we dont have 92 vitara's here we do have sidekicks /trackers
but carbs are ******* here, this car, this year, so zero CARBS.
our 92 both engines are fuel injected, TBI/MPI

finding carb rebuild kits are super hard this old a car.
and a mech, willing to touch one. 10x harder.
in the USA we have older Samurai's (Jimny in Euro speak)
the SAMMI's had carbs, and most of them (carbs) all are long long dead and gone. for all the reasons stated above, (0 support on carbs)
so we put in A nice Harley CV cab.
it is 100x more easy to tune than any weber made.
the weber needs custom jetting to work on your G16 engine.
(G13?) nah. i bet its G16 engine, right, and UNSTATED.
custom jetting, so join Vitara forum and post there.
ever google that.
Vitara forum?
its amazing that. small step.
we dont have G16 custom fueling systems pages here.
this place is a massive deep, un indexed or unorganized forum.

here is one seller, (random picked, I never spam)
study up on how CV works, it makes tuning vastly more easy.
a fact. (physics)

http://www.lowrangeoffroad.com/sidewinder-suzuki-samurai-cv-carburetor-installation-kits-40mm-or-44mm-seu-cvck-40-seu-cvck-44.html


Oct 02, 2016 | Suzuki Cars & Trucks

1 Answer

I have a nissan urvan 1988 petrol E24 model..problem is in the morning when cold when driveing it speedo will all of a sudden go from 60km to 80km even 100km


I have a nissan urvan 1988 petrol E24 model..problem is in the

www.botsofprey.org/F/cars/t25797951-nissan_urvan_1988_petrol_e24
I have a nissan urvan 1988 petrol E24 model..problem is in the ... Good luck & keep in touch. , jack the car up and take a bar lift up on tire and ck ... My nissan urvan 2005model ve25 with a 2ltr petrol engine ka20 has difficult starts with a cold ... is displying a fan error when switching on and fan stays at max speed.. any help?

Jul 27, 2015 | Nissan Cars & Trucks

1 Answer

I have a 1983 280 ZX turbo, there is a slight hesitation when accelerating. What can cause this?


if this is a carby engine then the hesitation can be from a faulty power valve in the carby (Carby overhaul) or incorrect timing . It could be an indication that the turbo is not spooling up quickly enough to produce the air required on acceleration Check for any split/loose vacuum hoses that are altering the mixture

Jul 16, 2014 | 1983 Nissan 280ZX

1 Answer

Hi! how can i find the engine number of my nissan urvan?


Nathan,that varies by engine size. and type.
no year, car, wow, why make this so hARD.?
1965 to NOW. wow, that is a long time for me to guess.
20 engines, gas and diesel.
dont feel bad, 99%here never post engine. ever.
urvan? Outside Japan, the Caravan was sold as either Nissan Urvan,



the FSM covers this on the first chapter.
get the FSm. buy one, and be DIY KING, huh?
or maybe just maybe alldata.com has this.????

post the exact engine type
open hood, look up see that white sticker, bingo , the engine name number. usually letters and numbers with displacement code.
then google for that engine exactly and with serial in the search
may be get lucky, takes work to do that, time and all that.
no 2 engines are same way. of the 20.

Jun 15, 2014 | Nissan Cars & Trucks

1 Answer

1982 gmc pickup I replaced the mechanical fuel pump and still am not getting fuel up to the carb and it will not start


You most likely have an air lock in the fuel line or fuel pump.
To start the engine and hopefully get the fuel to the carby, pour a little fuel down the carby and then start the engine. You may need to do this several times until you get the engine running.

Apr 08, 2012 | 1983 GMC C1500

1 Answer

Holden rodeo carby tuning


I really doubt the car is the problem, if it runs poorly at wide open throttle the carb is not the problem, check the fuel pressure 1st, it should be around 5-7 PSI, if that is ok then you may have a problem in the ignition system.

Feb 09, 2012 | Cars & Trucks

1 Answer

What is the torque of nissan urvan qr25 engine head bolts


nissan urvan 2006 engine head bolt torqe

Jan 31, 2012 | Cars & Trucks

1 Answer

83 s-10 2.8 engine needs choked to idle. Open choke


hi if your backfiring your timing is a little out also increase you idle speed on your carb by ajusting your throttle screw hope this helps if you find this useful please rate it thanks

Nov 20, 2009 | 1983 Chevrolet S-10

1 Answer

1983 toyota pickup truck runs rough when the motor warms up


It would appear that the Black smoke is unburnt fuel, meaning Spark or timing could also be out. Check you plug and point gaps. If you rebuilt the carby, float level is crucial also check the needle and set to ensure it is shutting off the fuel, if it is not shutting off, it will just flood the engine. Not sure what carby you have but I woud pull out the jets/power valve and replace them. Some carbys have a small ball bearing to control fuel, if that was lost that could be it. Pull up an exploded diagram of the carby and do it again. I know its time consuming, but it will be peace of mind. Good luck

Nov 19, 2009 | 1983 Toyota Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...