Question about 1994 Ford F250 Supercab

Open Question

How many grease nipples on a 1994 F-250 - 1994 Ford F250 Supercab

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the purpose of this nipple on the pump does it need anything attached to it


A nipple usually is a grease or oil point - you pump grease or oil in with a grease/oil gun.

The other use of a nipple is as a bleed point - think of your brakes. There's a bleed point - nipple - that you open whilst pumping the brakes to remove air from the system.

Jun 28, 2016 | Cars & Trucks

1 Answer

Where are the grease fittings for 1989 Mercedes 560 sel located for ball-joints


they are pre greased, no nipples. When I replace the ball joints, i drill a hole, and put my own grease nipple in. That is the diff. between the long warranted ones, and the economy ones, a lousy grease nipple. you may need replacement

Jan 21, 2013 | Cars & Trucks

1 Answer

How grease to grease ball joints on a 1998 dodge Dakota sport


You need a grease gun and a tube of grease for your particular vehicle make. You can purchase both at any auto parts store. If you haven't replaced the ball joints since the vehicle was made then you probably wont be able to grease them. Most vehicles come off the line without access. However aftermarket parts have points where you can grease. Take your grease gun and stick the end over the nipple,(sorry can't think of the name for the **** things that you grease into, so Im calling them nipples.) Anyway, pump the gun until grease comes out from the joint and that should do it. Really pretty simple operation provided you have the nipples at the joints already. Hope this helps.

Oct 26, 2012 | Cars & Trucks

1 Answer

Does hyundai lantra year 2000 have grease nipples


No I havent seen grease nipples on many newer cars lately. I think the manufacturers have done away with them. Dont try using your grease gun on the brake bleeder valves at any of the wheels. I had one car that the owner tried that on; It was a nightmare.

Jul 20, 2012 | Cars & Trucks

1 Answer

How do you do any maintenance (oiling or greasing - whichever is applicable) of rear wheel bearings in a 1987 jaguar xj6?


You don't. The bearing is greased for life. If the bearing is noisy it needs replacement.

FYI: Dismantling and greasing bearings does more harm than good due to the introduction of dirt, no matter how careful you are.

Modern greases are very sophisticated formulas of oil and soaps and last a long time.

Long gone are the days of white soap chassis grease that lasted 15,000 miles.

If the manufacture wanted it greased they would have installed a grease nipple in the housing.
However, over greasing a wheel bearing can sling grease onto nearby brakes and hoses.

The drive shaft CV joints are another thing however and you will find grease nipples in each joint behind the splash sleeves.

Jan 14, 2011 | 1987 Jaguar XJ6

1 Answer

Are there grease zerks on the 2002 corvette? if so how many and where?


now this is another new one ,?? please is a grease zerk a grease nipple in english ,i mean the bonnet is called a hood and the wiring a pigs tail and the engine guard a dogs kennel ,No i cannot say i have ever seen any on cars newer than 1995 or so if its a grease nipple your refering to

Jan 10, 2011 | 2002 Chevrolet Corvette

2 Answers

1991 Toyota 4runner. would like to know how many grease nipples there are and where to find them. Thanks.


most cars these days have pre greased joints which do not require greasing, you just replace the part when it wears out, not a good idea but thats how it is.

Oct 04, 2010 | Toyota 4Runner Cars & Trucks

1 Answer

I have an 2003 Acura RSX . I cannot find the lube nipples anywhere on this car.


If by lube nipples you mean grease fittings, which is where you grease the ball joint and the a arms etc. Most new autos including Acuras don't have them. In order to grease them they do make a grease gun end that is a hollow needle that can be inserted into the rubber part between the joints. I hope this helps.

Jan 24, 2010 | Acura RSX Cars & Trucks

1 Answer

Blown outside cv boot


There is no grease nipple! The cv's are greased during assembly and the boot holds the grease in. When you buy a new boot the grease comes with it in a package.

Al

Oct 08, 2009 | 1989 Nissan Pathfinder

1 Answer

I'd like to grease the front and rear axles but can't locate the grease nipples.


Check the area where the fittings should be.The holes may be plugged, you will have to remove the plugs and install grease fittings.
Hope this is of some assistance.
Ed.

Apr 18, 2009 | GMC Yukon Cars & Trucks

Not finding what you are looking for?
1994 Ford F250 Supercab Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...