Question about Cars & Trucks
It connects to the plug in for the turn signal switch, I've been trying to fix my tail and reverse lights as well as the dash lights. Inside the box are 4 40A fuses attached to a small cercut board. When i push the brake pedal the dash lights and the signal lights flash a couple times and then stay on and then i push the pedal again they click off. After takeing one or both of the 30A breakers out the reverse lights still don't work but everything else works fine, signals left, right, hazard, driving and dash lights all come on. I'm trying to figure out what this box does and if it is necessary
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I'd get a 12vdc test light if you don't have one already & start from plug, and keep probing back from there. It may be as simple as a bad connection under truck where joined into harness.
Posted on Nov 29, 2008
sounds like a broken wire in the harness. look around the bumper area,sometimes along the frame. may have to peel back some tape covering. also if you have a trailer harness look closely at those.
Posted on Jun 04, 2009
I have a 2000 ford focus no brake lights. with the brake lights the transmission would not go into drive .replaced the brake light switch checked fuse replaced turn signal switch with no results then i moved onto the wiper switch and replaced it as much to my supp rise it fixed the problems
Posted on Aug 06, 2009
I have seen once before that the fuse box was bad on a 2003 Dodge 3500. I had power in and nothing out. We had to replace the box. Not cheap! Hope it is simple like a loose connection though. I think I had to pull the inner fender on the drivers side to access the bottom of the fuse box. Pain in the ****, but...
Posted on Oct 01, 2009
Tips for a great answer:
Jan 24, 2017 | Lincoln Town Car Cars & Trucks
Nov 16, 2016 | Buick Cars & Trucks
Oct 25, 2014 | 2001 Chevrolet Blazer
Jun 05, 2013 | 2008 Jeep Liberty
Jan 28, 2013 | 2002 Saab 9-3
Nov 01, 2010 | 2006 Ford Five Hundred
Nov 10, 2009 | Nissan King Cab Cars & Trucks
Oct 08, 2009 | 2004 Dodge Grand Caravan
Sep 20, 2017 | Cars & Trucks
56 people viewed this question
Usually answered in minutes!