Question about Chevrolet Silverado 2500HD
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: wheel bearings on 2005 HD 2500
I just came across your posting, If you're still having this issue, it may be due to the offset of your wheels. Too much offset can cause excessive load on the outboard bearings. If you have wheels that move the centerline of the wheel too far outboard of the bearing, then you will generally be putting too much stress on the bearing/hub assembly. as you know your vehicle has a unitized bearing assembly. If the bearing is being overloaded on the outer edge by too much offset it will fail over time. hope this helps
Posted on Oct 21, 2008
SOURCE: 2004 Chevy Silverado HD 2500
On many engines with distributor less ignition systems and sequential fuel injection, a camshaft position sensor is used to keep the engine's control module informed about the relative position of the crankshaft. By monitoring cam position (which allows the control module to determine when the intake and exhaust valves are opening and closing), the control module can use the cam position sensor's input along with that from the crankshaft position sensor to determine which cylinder in the engine's firing sequence is approaching top dead center. This information is then used by the engine control module to synchronize the pulsing of sequential fuel injectors so they match the firing order of the engine. On some applications, input from the camshaft position sensor is also required for ignition timing.
The camshaft position sensor may be magnetic or Hall effect, and mounted on the timing cover over the camshaft gear, on the end of the cylinder head in an overhead cam application, or in a special housing that replaces the distributor (in the case of some of the GM applications). Operation and diagnosis is essentially the same as that for a crankshaft position sensor.
Re check the wire harness and the sensor installation to the camshaft sensor in Bank #1 which is where the #1 cylinder is. Good luck and hope this adds some light to you question, keep me posted and be glad to help.
Posted on Jun 02, 2009
you need your glove compartment manual that came with truck.you have to reset or recalibrate the radio +cd player before it will play.if you dont have factory manual that came in dash.take it to dealership.
Posted on Jul 15, 2009
Are both batteries fully charged showing 12v? I ask this because I don't know if your friend's vehicle was charging. If it wasn't then when you put that battery back in your system it would reduce your overall voltage.
Posted on Jan 03, 2010
Tips for a great answer:
Mar 14, 2017 | Cars & Trucks
Apr 05, 2014 | Cars & Trucks
Dec 23, 2013 | 2000 GMC New Sierra 1500
Feb 08, 2012 | 2000 Chevrolet 2500
Feb 27, 2011 | 2001 Chevrolet Silverado 2500HD
Jan 03, 2010 | 2008 Chevrolet Silverado 2500HD 2WD
Oct 28, 2009 | 1994 Chevrolet Silverado 2500
Jul 28, 2009 | Chevrolet 2500 Cars & Trucks
Jul 15, 2009 | 2004 Chevrolet Silverado 2500HD
73 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: