Question about 2005 Hyundai Tucson

Open Question

How to replace parking brake parts on hyundai tucson

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emjem74
  • 162 Answers

SOURCE: brake adjustment

there is only two real ways to tension your handbrake and one of them is just behind the acctual handbrake lever which is usually an ashtray or some kind of panel which will just remove and reveal a bolt with two secondary bolts comin out of other end. should only have to tighten the centre bolt though if the other two need tensioning you mite find there is excess on one side or the other. under the car also is a tensioning bar either side of the chasis.

Posted on Feb 26, 2009

468 Chevelle
  • 81 Answers

SOURCE: Hyundai 2006 tucson. There's a clanking and

Hve you had the brakes checked. Sounds like the brakes are grinding

Posted on Mar 27, 2009

martin538
  • 117 Answers

SOURCE: Hyundai Tucson

The transmission filter is inside the transmission. You have to drain out the oil and remove the transmission pan and gasket. The filter is made of metal guaze and is screwed/bolted to the underneath of the valve body.

Posted on Apr 09, 2009

  • 67 Answers

SOURCE: change brakes on a 05 hyundai tucson

rear pad replacement is basically the same as front. 14mm bolts holding caliper and mount on hub then the piston just pushes in

Posted on Apr 09, 2009

alicantecoli
  • 22095 Answers

SOURCE: rear dragging noise, when applying the brakes.

take it back to dealer ,its under warrenty

Posted on Nov 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 hyundia tucson


Search Results

    2005 Hyundai Tucson Recalls - Cars.com

    www.cars.com/recalls/hyundai/tucson/2005/

    Cars.comLook up all NHTSA vehicle safety recalls for your 2005 Hyundai Tucson, and contact a nearby service center for free repairs.

    2005 Hyundai Tucson Problems, Defects & Complaints

    www.carcomplaints.com/Hyundai/Tucson/2005/
    7 days ago - The 2005 Hyundai Tucson has 199 problems & defects reported by ...January 11: Hyundai Genesis Recalled to Replace Dangerous Tires ...

    Hyundai Tucson Recalls ' RepairPal

    repairpal.com > Recalls > Hyundai
    Other systems that may be affected include: cruise control, push-button start, gear shifter, and Electronic Stability Control (ESC) system. Dealers will replace the brake light switch to correct this concern. ... The stop lamp switch may fail, affecting many vehicle systems including ...

    2005 Hyundai Tucson Recall - Learn About Recalls for 2005 ...

    www.automd.com > Recalls and TSBs > Hyundai Recall > Tucson

Jan 28, 2016 | Cars & Trucks

1 Answer

Adjust handbrake in Hyundai tucson


The adjustment is made at the handle under the console:

ADJUSTMENT OF PARKING BRAKE STROKE

1.Pull the brake lever with a force of approx. 196 N (20 kg, 44 lbs.) and check the number of clicks.

Parking brake lever stroke (Standard value) : 8 clicks

2.If the number of notches is not the standard value, adjust the cable length with the adjusting nut on the equalizer.
3.The indicator light will go out when the brake lever is fully released, and will light up with the lever pulled one notch. If it does not operate properly, replace it.
4.After the adjustment, check that the rear brakes do not drag with the parking brake lever released.

Mar 05, 2015 | 2007 Hyundai Tucson Limited

1 Answer

The taillights on my Hyundai 2005 Tucson won't go out when I turn offthe ignition


be looking at the brake pedal switch and also control module tho I think that gets tested at the dewaler..

Dec 15, 2013 | 2006 Hyundai Tucson

1 Answer

I turn the key but the car won't start. Thinking I didn't turn it enough I turned it again and it makes a weird sound. Turned the car off and back on and it worked fine. Then today I had...


If in fact you own a 2011 Tucson, it's under warranty. You're describing a malfunctioning brake/stop lamp switch relating to the traction control light and getting into park. The other problem needs to be diagnosed by a qualified/certified Hyundai Service Technician (probably under warranty). Phone your nearest Hyudai Service Department & take it in for warranty repair (or have it towed in using your Hyundai Roadside Assistance Service (no cost to you).

Aug 27, 2011 | 2011 Hyundai Tucson

1 Answer

Hi, I have a 2005 tucson, i applied my handbreak yesterday in my driveway and now it won,t fully release. back wheel is making a noise when i go forward. my question is, do i have to replace it or can i...


YOU NEED TO ADJUST REAR PARKING BRAKE AT THE LEVER.FIRST OF ALL YOU NEED TO BLOCK FRONT WHEELS.THEN RAISE THE REAR OF THE VECHICLE.SUPPORT WITH JACK STANDS.MAKE SURE YOU ARE ON HARD LEVEL SOLID GROUND WHEN USING JACK STANDS.AFTER RAISING THE CAR SET PARKING BRAKE 1 CLICK TOWARD ENGAGEMENT.REMOVE FLOOR CONSOLE.TIGHTEN THE ADJUSTING NUT UNTIL THE PARKING BRAKES DRAG SLIGHTLY WHEN THE REAR WHEELS ARE TURNED.RELEASE THE PARKING BRAKE COMPLETELY.CHECK IG PARKING BRAKES DRAG WHEN REAR WHEELS ARE TURNED.READJUST IT NECESSARY UNTIL THERE IS NO BRAKE DRAG FROM THE PARKING BRAKES.

Apr 20, 2010 | 2005 Hyundai Tucson

1 Answer

Instructions for replacing the front brake pads-2005 Hyundai Tucs


Jack the front of the car up, and make sure it is securely supported. Remove the wheel, remove the 2 guide bolts (located on the back of the caliper), and remove the caliper, hanging it by a coat hanger or wire to keep pressure off the brake line. Remove the pads and shims. Clean rotor with brake parts cleaner, and install new pads/shims. Repeat on other isde. Check with the parts store to see whether or not you need to use anti-squeak compound for your specific brake pads. Once you install them, you will need to bed the brakes to get the most use out of them. Accelerate to 30mph, then hard brake to zero (5-10 times), then repeat but to 60mph and hard brake to zero. Do this a couple times, and you will get very long life out of your brakes.

Apr 16, 2009 | 2005 Hyundai Tucson

1 Answer

Change brakes on a 05 hyundai tucson


rear pad replacement is basically the same as front. 14mm bolts holding caliper and mount on hub then the piston just pushes in

Apr 08, 2009 | 2006 Hyundai Tucson

1 Answer

I am having a problem with my shifter on my 05 Hyundai Tucson. The shifter was fluggush and not it won't shift into gear at all.


make sure your brake lites are working. the shift interlock release runs through brake lite system. you have have foot on brake to release from park. safety

Nov 30, 2008 | 2005 Hyundai Tucson

1 Answer

Anything to watch when changing pads and rotors on a 2006 Tucson?


Not really anything special, just if you have rear disc brakes there is a special tool you need to push (rotate) the caliper piston in because of the fact they are special calipers equipped for parking brake function.

Aug 22, 2008 | 2006 Hyundai Tucson

Not finding what you are looking for?
2005 Hyundai Tucson Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...