Question about 2000 Ford Ranger SuperCab

1 Answer

Clutch leaking fluid on my 2000 ford ranger

Fluid leak problem

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 214 Answers

Internal slave cylinder is probably leaking.. Pull the inspection Plate/Plug on the Bell Housing

Posted on Mar 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2000 ford focus se is leaking brake fluid through the transmission would I have to replace clutch?


if it leaking brake fluid there, it would be your throw-out bearing! would also be the perfect time to replace the clutch! also, brake fluid will eat away the clutch disc lining!

Mar 26, 2012 | 2000 Ford Focus

1 Answer

I have clutch fluid leaking down the pedal.. what is this?


The Clutch Master Cylinder is leaking, it will eventually get worse and then fail.

Aug 25, 2011 | 1998 Ford Ranger SuperCab

2 Answers

Having problems with the clutch in my 1998 Ford Ranger. There is no freeplay, and it is very difficult to shift. Do I need to adjust the clutch? If so, how do I adjust it?


The clutch is not adjustable,it is a fluid clutch.It has to be a leak,or the slave cylinder,and,or, the master cylinder are bad,It does not have to be leaking to be bad,but it is one of the two.Rate please,thank you.

Jul 12, 2010 | 1998 Ford Ranger SuperCab

1 Answer

I have a 2000 ford ranger thats leaking brake fluid from the rear everytime i hit the brakes it shoots fluid from the little thing in the back that splits the brake line i was wandering what the piece is...


It is called a splitter block. But it is more likely to be a bad line going into the block. Check to see if and of the lines going into the block are rusty and start with that line. Clean it off as good as you can and have someone press the brake pedal while you look to see exactly where the fluid is leaking from. If one of the lines is leaking, its best to replace all of them as another one will be leaking soon. If it is in fact the splitter block, it will be a dealer item only. Good luck.

May 27, 2010 | 2000 Ford Ranger SuperCab

1 Answer

What cause radio harness and light switch harness to burn on a 2000 ford ranger


Hello
Check the ford recall list.Youll need your vin number of the truck.

There has been recalls for the brake fluid leaking and causing fires on the wiring harness.

OR contact your local ford dealer.

Mar 22, 2010 | 2000 Ford Ranger SuperCab

3 Answers

We have a 94 manual transmission Ford Ranger located in a cold climate. All of a sudden, when you step on the clutch pedal there is no resistance. Suggestions on what this might be?


you need to check the fluid level in the hydraulic clutch master cylinder under the hood,it is probably low or the slave cylinder in the bell housing that pushes the throw out bearing in is leaking.

Jan 18, 2010 | 1994 Ford Ranger Supercab

2 Answers

My 1991 Ford Ranger Clutch Problem.


get someone to push clutch down and check if arm moves.Clutch has nothing to do with the starting of the engine on a vehicle this ancient

Mar 31, 2009 | 1991 Ford Ranger Supercab

1 Answer

Clutch fluid


I would first check for leaks, and if no leaks i would check your master and slave cylinders if they are working properly

Dec 17, 2008 | 1993 Ford Ranger SuperCab

Not finding what you are looking for?
2000 Ford Ranger SuperCab Logo

Related Topics:

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...