Question about 1988 Chevrolet S-10

Open Question

Spark plug gap, 1988 chevy s10

4 cylinder, automatic transmission

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 341 Answers

SOURCE: need plug gap for 2003 4.3 chevy truck

the plug gap is -- .060

Posted on Dec 06, 2008

Ad
emissionwiz
  • 76846 Answers

SOURCE: spark plug gap chevrolet 1988 1500 v8 5.7 litre

GAP=0.035" source: rockauto.com

Posted on Mar 12, 2009

motor1258
  • 6674 Answers

SOURCE: GAP SETTING FOR 1995 CHEVY SILVERADO

4.3L = .045, / 5.0L & 5.7L = .035

Posted on Mar 22, 2009

canbruce75
  • 1776 Answers

SOURCE: what is the gap for 98 chevy cavalier?

The spark plug gap is .050". Hope this helped and best wishes.

Posted on Aug 26, 2009

emissionwiz
  • 76846 Answers

SOURCE: '77 Chevy C-10. Spark plug gap and timing degrees

8 degrees BTDC (6 in calif) spark plug gap 0.45"

Posted on Sep 11, 2009

Testimonial: "Exactly what I needed without having to find and purchase an expensive shop manual. "

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will a 2003 chevy s10 4.3 transmission interchange with 1994 s10 4.3 trans


This 4.3 V6 is just a 350 V8 with 2 cylinders missing and even a V8 trans will fit/interchange physically being the same bolt pattern and size. If it's the same shift pattern and both transmissions are overdrive transmissions, yes, it will interchange. If it's GM, it'll swap. From 1988 the automatic transmissions have a multi bolt pattern and Pontiac, Caddy, Olds and Chevy, all will bolt up.

Nov 11, 2017 | Cars & Trucks

1 Answer

What is the spark plug gap for the above car which is 4 cylinder. thanks


1988 Oldsmobile Cutlass Ciera, original GM plug gap .045".
this is what i would gap new plugs too, AC Delco Part # R44LTS plugs probably gaped at this already.
press the helpful button

How To Change Spark Plugs on 1987 Cutlass Ciera SL 3 8L

Spark Plug Gap NGK Spark Plugs Tech Video

How to Gap Spark Plug

How to Gap Spark Plug

Feb 04, 2016 | 1988 Oldsmobile Cutlass Ciera

2 Answers

What is the spark plug gap for a 1988 toyota cressida?


the gap can vary slightly depending on the plug make, type etc , follow this link for more details, it is a web site that sells auto parts and i'm not promoting them in any way it just happens to have the info you want
1981 1988 TOYOTA CRESSIDA SPARK PLUG BOSCH PLATINUM PLUS SPARK PLUG

Jul 23, 2014 | 1988 Toyota Cressida

1 Answer

Need firing order to 89 chevy s-10 p/u w/ 4.3 liter/6cyl. replacing plug wires


4.3 v/6 firing order for an S-10 Chevy is 1-6-5-4-3-2, a helpful tip to always locate # 1 spark plug on a v engine.
If you look carefully at the cylinder heads note the very front of each, do you see one sticks out slightly further to the front then the other?
Tghis is the way these engines have to be cast for proper cylinder and timing rotation.
The furthest forward cylinder head is in fact the home of #1 cylinder, it is the first spark plug on that head, which in this case is the right side head.

Jun 09, 2010 | 1988 Chevrolet S-10

1 Answer

What is the firing order of the wires that go from the spark plugs to the coil pack or distrobuter for a 1988 4 cylinder chevy corsica


For the 2.0L:
Firing Order:
1-3-4-2
Cylinders:
1---2---3---4
(front of vehicle)
Ignition Connections:
----[4]
-------[1]
---------[3]
-----------[2]
(front of vehicle)

Feb 09, 2010 | 1988 Chevrolet Corsica

1 Answer

Replacing spark plugs on a 2004 chevy malibu


2.2L Engine
  1. Observe the following service precautions:

    Allow the engine to cool before removing the spark plugs. Attempting to remove spark plugs from a hot engine can cause the spark plugs to seize. This can damage the cylinder head threads. Clean the spark plug recess area before removing the spark plug. Failure to do so can result in engine damage due to dirt or foreign material entering the cylinder head, or in contamination of the cylinder head threads. Contaminated threads may prevent proper seating of the new spark plug. Use only the spark plugs specified for use in the vehicle. Do not install spark plugs that are either hotter or colder than those specified for the vehicle. Installing spark plugs of another type can severely damage the engine.
  2. Turn the ignition OFF .
  3. Disconnect the Electronic Ignition (EI) module harness connector.
  4. Remove the spark plugs using a 5 / 8 inch spark plug socket.

To install:

WARNING Do not coat spark plug threads with anti-seize compound. If anti-seize compound is used and spark plugs are over-torqued, damage to the cylinder head threads may result.
  1. Inspect the gap on the new spark plugs, re-gap the plugs as required. The spark plug gap specification is 42 inch. (1.0 mm).
  2. Install the spark plugs and tighten to 15 ft. lbs. (20 Nm).
  3. Apply dielectric compound to the spark plug boots and make sure no corrosion is present.
  4. Install the ignition coil housing to cam cover and attachment bolts.
  5. Tighten the ignition coil housing bolts to 89 inch. lbs. (10 Nm).
  6. Connect the EI module harness connector. Push in until a click is heard and pull back to confirm a positive engagement.

Oct 07, 2009 | 2004 Chevrolet Malibu

3 Answers

Spark plug gap


Notice: This engine has aluminum cylinder heads. Do not remove the spark plugs from a hot engine, allow it to cool first. Removing the spark plugs from a hot engine may cause spark plug thread damage or cylinder head damage.
Gap the spark plug, using round wire type spark plug gap gage. 


Gap Adjust the spark plug gap to 1.14 mm (0.045 in).

DO NOT coat the spark plugs with anti seize compound. Over torquing could occur and damage to the cylinder head threads may result.

If your going to use Platnum plugs, DO NOT GAP them. Just check the gap and if there not the right gap, ask for new one's with the right gap.

The metal on the PLatnum plugs, are harder and my break apart in the cylinder .

Good luck and hope this helps

May 02, 2009 | Pontiac Sunfire Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...