Question about Volvo Cars & Trucks

Open Question

How to set hydraulic tappets on volvo s 80 d5

Tappets are noisey

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 36 Answers

SOURCE: Volvo se D5.Estate 2004 year .

press and hold button below speedo immediately switch ignition on Keep button depressed until service message has been reset release reset button within 4 seconds there will be an audible signal when reset complete if reset button is not released within 4 seconds then the service interval indicator will not be reset.

Good Luck

Posted on Sep 06, 2008

Ad
stormbrewin
  • 426 Answers

SOURCE: tappet noise

Sounds like worn lifter/cam lobe,quite normal when engine gets a few mles on it.Lifter is finding it hard to fill the extra clearance created by wear.What sort of oil are you using and is it clean?Wear in an engine will lower your overall oil pressure as well,not generaly enough to worry about but it does contribute to the problem.At idle or when cold is generaly when this happens?

Posted on Oct 24, 2008

germcelchar
  • 389 Answers

SOURCE: sounds like a noisey tappet when engine cold 2.5 1997

Did you check the tappet's yet. If not when you do and this was'nt the problem get back to me I will try to help you further. Cheer's

Posted on Aug 14, 2009

  • 102 Answers

SOURCE: noisey tappets

Don't bother. They are hydraulic and rely on oil pressure to obtain a zero clearance when everything is OK. Your oil system may be sludgy or you may be using the incorrect viscosity oil.

Posted on Oct 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is tappet settings


Hydraulic tappets are tappets that contain a small hydraulic piston, pressurised by the engine's lubricating oil supply.[5] Although the piston does not move appreciably or frequently, it acts as a hydraulic spring that automatically adjusts the tappet clearance according to the oil pressure. This makes the valve actuation self-adjusting and there is no need to adjust the rockers. Hydraulic tappets depend on a supply of clean oil at the appropriate pressure. When starting a cold engine, with low oil pressure, hydraulic tappets are often noisy for a few seconds, until they position themselves correctly.


Parts For Porsche Panamera

Jun 15, 2012 | Cars & Trucks

1 Answer

Has a ticking in the motor but its never been without oil.u hear the ticking on th right side of the motor


these vehicles do not have hydraulic tappets but shims and from the sound of it it could be a follower worn through or a noisey worn camshaft and the only way to find out is to take the top off and have a good look and measure the tappet settings ,inllet 12th and exhaust 15th

Feb 21, 2011 | 2000 Ford Focus

1 Answer

Tappets noisey when cold


Check which oil you are using. This can happen with excessive dirt int he tappets if they are hydraulic or if the oil viscosity weight is too high. At one time, Rislone was the answer, but it is not always the best idea with some of the new alloys and aluminum heads and blocks. You may do better with a fully sythetic oil like Castrol Syntech. Also, make sure that your timing is correct.

Nov 27, 2010 | 2000 Mazda Protege

1 Answer

Vehicle will not start after cambelt and cylinder head refitment


providing all the work is done correctly then it might take a while to start as you need to get the oil into the hydraulic tappets.. then it still might sound noisey untill it has done 10 - 20 miles

Dave

Sep 05, 2010 | 2003 Land Rover Freelander

2 Answers

2001 Volvo s60 D5 very difficult to shift gear


if you have a hydraulically assisted clutch, check the reservoir. it's located on the firewall in the vicinity of the brake vacuum booster. if it's low/empty, fill it. you may have air in the system which will require bleeding. what is the mileage? you may be due for a clutch. if you google, "hard shifting manual trans" you will gain more insight on the matter.

Apr 13, 2010 | 2001 Volvo S60

1 Answer

Just changed my head gasket on vauxhall astra 1.6 8 valve and ended up with very noisey tappets


vauxhaul asta ,nice wheels but not hydraulic adjusters ,you got the tappets mixed up and now they will need resetting with shims ,always paint the numbers on top after lifting the cam off .i have one of these cars a gti 1994 model and i can still burn off from the lights BMW 3 series.

Mar 18, 2010 | 2005 Peugeot 405

1 Answer

Noisey tappets


Don't bother. They are hydraulic and rely on oil pressure to obtain a zero clearance when everything is OK. Your oil system may be sludgy or you may be using the incorrect viscosity oil.

Oct 03, 2009 | 2000 Suzuki Grand Vitara

1 Answer

Tappets making a constant noise


i would suggest asking your mechanic which viscosity(thickness) oil he put back in and check it against the manufacturers recommendation as if it isto thin then it will make your tappets unusally noisey if he has put in the correct oil then i would say that they were quiet because of the old gungy oil and they either need adjusting or if they are hydraulic then the lifters need replacing

Jun 01, 2009 | 2002 Land Rover Freelander

1 Answer

Upon start up, have what sounds like valve train noise


SOUNDS THAT YOUR TAPPETS ARE NOISEY COULDN'T TELL YOU IF ARE ADJUSTABLE OR THEY ARE HYDRAULIC TAPPETS NEED TO REFER TO HYUNDAI.

Dec 17, 2008 | 2001 Hyundai Accent

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

204 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...